Deye SUN-10K-G03-LV User manual
R
User Manual
Grid-tied PV String Inverter
SUN-10K-G03-LV
SUN-15K-G03-LV
SUN-12K-G03-LV
- 01 -
On-grid inverter can convert solar panel DC power into AC power which can directly input to
the grid. Its appearance is shown below. These models contain SUN-10K-G03-LV,
SUN-12K-G03-LV, SUN-15K-G03-LV.
Pic 1.1 Front view
Photovoltaic Grid-connected System
About This Manual
How to Use This Manual
Contents may be periodically
The latest manual can be acquired via [email protected]
Inverter MeteringPV array Power grid
Family load
- 02 -
1.2 Parts list
Please check the following table, to see whether all the parts are included in the package
screws M4×12
DC power connectors
User
manual
Square hole sealing plate
When ordering the sun limiter, it will includes 3pcs CT.
- 03 -
2.1 Safety signs
Shock Hazard:
which if not correctly followed, could result in electric shock.
High Temperature Hazard:
followed, could result in burns.
Safety Hint:
Warning:
followed, could result in serious injury or death.
Shock Hazard:
Warning:
of the country or local area.
Warning:
Inverter adopts non-isolated topology structure, hence must insure DC input and
Otherwise it will damage the inverter.
- 04 -
2.3 Notes for using
Shock Hazard:
Shock Hazard:
While disconnect the input and output of the inverter for maintenance, please
High Temperature Hazard:
Please do not touch the inverter case.
It can ensure the personal safety of the user. But as a electric device, it may cause shock or
obtaining the permission of the local power supply department, the professionals can
connect the inverter to the grid.
disconnect the DC side.
- 05 -
Pic 3.1 Front panel display
3.1 Interface View
3.2 Status Indicator
alarm. red indicates alarming.
Explanaon
Inverter detects DC input
Low DC input voltage
Grid Connected
Grid Unavailable
Detected faults or report faults
Indicator status
on
on
on
on
Table 3.1 Status indicator lights
ACDC AlarmNormal
UP, Below
DOWNESCENTER.
;
.
3.4 LCD Display
Esc Up Down Enter
- 07 -
sunlight or raining.
.
each inverter must be at least 500mm above and below.And must install the inverter at the
place where children cannot touch. Please see picture 4.3.
indicator status clearly.
Safety Hint:
15
- 09 -
4.2 Inverter of inverter
500mm
500mm
Anchoring
Stainless steel screws
Inverter
- 10 -
accessory to lock inverter heat sink to the hanging plate, to ensure that the inverter will not
move.
- 11 -
2. Switch the DC lsolator OFF.
3. Assemble PV input connector to the inverter.
Safety Hint:
cause serious damages to the inverter.
Safety Hint:
within the 1000V of the inverter.
Safety Hint:
Safety Hint:
Please use approved DC cable for PV system.
Cable type Range Recommended value
Cross secon
Industry generic PV cable
- 12 -
Pic 5.3 Disassemble the connector cap nut
Pic 5.4 Crimp the contact pin to the wire
Pic 5.5 connector with cap nut screwed on
- 13 -
, shown as
Warning:
Sunlight shines on the panel will generate voltage, high voltage in series may
panel needs to be blocked by the opaque material and the DC switch should
be 'OFF', otherwise, the high voltage of the inverter may lead to life-
AC side of the inverter, the AC side is equipped with Three phase AC terminals that can be
-
Outside cable
Cable CSAModel Cable outer dia AWG Breaker Max cable length
SUN-10K/12K/
15KW-LV 10mm 50A/400V
Warning:
- 14 -
-
Warning:
1. Matching socket 2.Sleeve 3.Sealing core 4.Sealing nut
Pic 5.7 AC connector structure
1 2 3 4
- 15 -
-
all PE cables of the inverter need to be connected to the same grounding copper platoon to
picture 5.11.
Warning:
than 300 mA or higher, otherwise inverter may not work properly.
prevent overcurrent. See table 5.3 below.
- 17 -
sealed plate as shown in Picture 5.14. When installing the datalogger, remove the sealing plate,
power on. When the inverter is on the DC power, it is determined whether the datalogger is
PC
Router
WIFI
GPRS
Web Server
Phone
Rated output
voltage(V)
Inverter Rated output
current(A)
Current for protecon
device(A)
SUN-10K-G03-LV 127 35
SUN-12K-G03-LV 127 4031.5
SUN-15K-G03-LV 127 5039.4
number of PV modules.
When start up the inverter, should fellow below steps
1. First switch on the AC breaker.
and power, the inverter will start.
3. When the AC voltage and DC voltage are normal, the inverter start-up is ready to begin. The
crystal will show that the inverter is self-checking.
4. If the parameter is within acceptable range, the inverter will generate energy.
NORMAL indicator light is on.
6.1 Start up the inverter
connector. The inverter will close the LCD and all led within two minutes.
Other manuals for SUN-10K-G03-LV
1
This manual suits for next models
2
Table of contents
Other Deye Inverter manuals
Deye
Deye SUN-70K-G User manual
Deye
Deye SUN-29.9K-SG01HP3-EU-BM3 User manual
Deye
Deye SUN-18K-G04 User manual
Deye
Deye SUN-3K-G03 User manual
Deye
Deye SUN-5K-SG Assembly instructions
Deye
Deye SUN-3.6K-G User manual
Deye
Deye SUN-3.6K-SG05LP1-EU User manual
Deye
Deye SUN-3.6K-SG01/03LP1-EU User manual
Deye
Deye SUN-60K-G User manual
Deye
Deye SUN-1.5K-G04P1-EU-AM1 User manual
Deye
Deye SUN Series Instruction Manual
Deye
Deye SUN-12K-G03 User manual
Deye
Deye SUN-35K-G-LV User manual
Deye
Deye SUN-18K-G03 User manual
Deye
Deye SUN-75K-G03 User manual
Deye
Deye SUN-12K-SG01LP1-EU User manual
Deye
Deye SUN-12K-SG01LP1-AU-AM3 User manual
Deye
Deye SUN-12K-G02-LV User manual
Deye
Deye SUN-6K-SG04LP3-AU User manual
Deye
Deye SUN-15K-G05 User manual
Popular Inverter manuals by other brands
Sputnik Engineering
Sputnik Engineering SolarMax S Series installation instructions
BEHLMAN
BEHLMAN BL5000 Series User's guide and technical reference manual
Lumena
Lumena OLYMPIA PRO SOLAR user manual
MOIXA
MOIXA Smart Battery Maintenance manual
INVT
INVT Goodrive600 Series Operation manual
Lumiax
Lumiax Smart-CC Series user manual
