DH Lifelabs AQUASOLVO AAHE-50WC04C User manual

Powered by nature.
Delivered by science.
AquaSolvo HOCl technology
Filter, Sterilize, Smart Control
AAHE-50WC04C
AQUASOLVOTM
ECO AMBIENT AIR STERILIZER
(WIFI-ENABLED)
QUICK START GUIDE
www.DHLifelabs.com Powered by nature.
Delivered by science.
TM
MADE IN CHINA
EPA Est.
No. 99117-CHN-1
FDA
Registered
No. 3013851416

1
1
2
2
3
3
44
5
5
6
6
7
7
8
8
Main Body
4-in-1 HEPA Filter
HOCl Generator
Cold Evaporation Filter (CEF)
HOCl Generator Assembly
Remote Control
Salt Bottle with Scoop
Control Panel with Air Quality Light Ring
1 2
Product Overview
The AquaSolvo Eco Ambient Air Sterilizer has a ve-stage cleaning system to purify the
air. A fan draws air in through 4-in-1 HEPA lter on the bottom of the Sterilizer. Inside,
the air passes through the Cold Evaporation Filter (CEF) and exits through the air
outlet.
Stage 1-4: 4-in-1 HEPA lter.The Pre-Filter captures large airborne particles including
dust, pollen and hair. The Anti-Bacterial Coating kills some of bacteria and viruses.
The True HEPA Filter removes 99.97% of particles down to 0.3 microns. The Activated
Carbon Filter absorbs odors, gases, and VOCs.
Stage 5: CEF. The CEF absorbs the HOCl water generated inside the machine. The
HOCl water is evaporated as air passes through the CEF. This disperses the HOCl
vapor throughout the airspace in the room allowing it to destroy a variety of bacteria
and viruses.

3 4
Control Panel Control Panel
1. CEF Replacement Indicator
2. HEPA Filter Replacement Indicator
Press for 3s to reset the lter life countdown.
WiFi Indicator
Flashing amber: Attempting to connect
Steady amber: Connection successful
Steady red: Not connected
Timer
2H/4H/8H timer set to run before it automatically
shuts off
Salt Level Indicator
High Salt Alert: Flashing + sound alarm
Water Level Indicator
Low Water Alert: Light on + sound alarm
Operation Action:
1. Power off the device
2. Empty the HOCl Generator
3. Fill with tap water to Max line + 1 scoop of non-iodized salt
Sleep Mode
Lowest fan speed level with ultra low noise
On/Off
The Sterilize function default on when the machine
is turn on
Sterilize
The light remains on when the machine is on and
ash when electrolysis is working to process HOCl.
You can turn the sterilization function off, then it
will work as a purier.
Fan Speed
(1/ 2/ 3) Three levels of fan speed
Operation Action:
1. Power off the device
2. Fill with tap water to Max line + 1 scoop of non-iodized salt
Operation Action:
1. Power off the device
2. Empty the HOCl Generator
3. Wash the CEF
4. Fill with tap water to Max line + 1 scoop of non-iodized salt
Salt Level Indicator
Low Salt Alert: Light on + sound alarm
Smart AquaSolvo Creates A Perfect
Experience Every Time!
*The machine will provide a 10-hour continuous
operation when the water reaches the Max line based on
the working humidity at 50% and level 3 fan speed.

5 6
Operation
Product Specications
Detach the bottom cover, the 4-in-
1 HEPA lter from the plastic bag,
and install it in the unit. Replace
the bottom cover.
Grasp the handle and turn the
generator to unlock it from its
base, and remove the generator.
Remove the CEF by unscrewing it
from the generator.
Replace the CEF and screw it
into the bottom of the HOCl
Generator.
Wipe the exterior of the generator
dry and place it back in the
base. Using the handle turn the
generator to lock it in place.
Fill the generator with tap
water to the MAX. water level
(800ml/27.05oz.).
Add 1 scoop of non-iodized salt
to the water.
Remove the top cover to access
the HOCl Generator Assembly
for all below operation. Replace
the top cover.
You are now ready to
ENJOY clean safe air!
1
2
3
4
5
6
7
8
9
Power Consumption 80 Watts
Input Voltage 120VAC 60 Hz
Fan Speed 3 levels (1/2/3) + Sleep Mode
Noise Max. 61 dB(A)
CADR (clean air delivery rate) 300 CFM
Timer 2H/4H/8H
HOCl Generator Capacity 800ml/27.05 oz.
HOCl Recipe 1 scoop non-iodized salt: 800ml/27.05 oz. tap water
Material & Finish ABS, Glossy White & Copper
Recommended Room Size 460 square feet
Reminder - Filter Replacement Reminder: 4-in-1 HEPA lter & Cold
evaporation lter
- Salt Level Reminder
- Water Level Reminder
Dimension (Machine) 13.6 (bottom diameter) x9.13 (top diameter) x35.18 (height)
inches (347*232*893mm)
Dimension (Remote Control) 1.77 (bottom width) x 0.79 (top width) x4.13 (height) inches
(45*20*105mm)
Net Weight 21.38 lbs (9.7kg)
Air Quality Light Ring
Good Moderate Poor

7 8
Maintenance
1. CEF Replacement Indicator 2. HEPA Filter Replacement Indicator
CEF: Part Number AS04FT-2
Replace every 6-months
1. Detach magnetic top cover 1. Detach magnetic bottom cover
3. Replace magnetic top cover 3. Replace magnetic bottom cover
4. Press and hold Filter Replacement
Button for 3 seconds to reset lter
life countdown.
4. Press and hold Filter Replacement
Button for 3 seconds to reset lter
life countdown.
2. Remove and replace CEF 2. Remove and replace HEPA lter
4-in-1 HEPA lter: Part Number DH02FT-1
Replace every 18 months, or more frequently if
necessary.
11 2 2
3 34 4
Only use genuine D&HLifelabs CleVaFilter with your AquaSolvo Eco Air Sterilizer with
Humidier. Use of any other lters may compromise the proper operation of your lter
and potentially void your warranty.
To purchase replacement lters, please visit: www.DHLifelabs.com
Only use genuine D&HLifelabs AquaSoFilter with your AquaSolvo Eco Air Sterilizer with
Humidier. Use of any other lters may compromise the proper operation of your lter and
potentially void your warranty.
To purchase replacement lters, please visit: www.DHLifelabs.com

9 10
Connectivity
You can connect your Eco Ambient Air Sterilizer AAHE-50WC04C with
the AiLivin APP to control the sterilizer and check air quality.
Download and install
AiLivin APP
Open the APP and click ‘+’ to connect your device. Please follow the
steps in the APP.
Cleaning
• We recommend that you clean the machine at least weekly. Clean the
HOCl Generator with tap water to get rid of odors. Use a clean dry
cloth to wipe the external surfaces of the machine.
• It is highly recommended to soak the CEF in cool clean tap water for 1
hour each month to minimize odors.
• Do not use wax, furniture polish, or any chemical solution to clean the
device.
• If your machine will not be used for more than 30 days, we recommend
that you empty the water from HOCl Generator, and dry it. It is also
recommended you to remove the CEF and let it dry.
Cleaning the Air Quality Sensor
The inlet for the air quality sensor is located at the back of the machine
as shown below. Every 2 months you should clean the inlet using a
vacuum or a cotton swab that has been lightly moistened with clean
water.