DH Lifelabs Sciaire Mini + HEPA User manual

Created by nature.
Engineered by science.
Sciaire Mini + HEPA
QUICK START GUIDE | CAHP20WH01
EPA EST. NO. 99117-CHN-1
MADE IN CHINA
dhlifelabs.com/help-support/
We're saving some paper.
View your manual online.
Need Help?
1-877-548-9722
9 AM–6 PM, CST, Monday–Friday
Dernier & Hamlyn Inc.
720 Northgate Parkway
Wheeling, IL 60090
*The Sciaire Mini + HEPA uses Plasma Technology.
**Dispose used products according to local regulations.

1 2Copyright © 2022 Dernier & Hamlyn Inc. All rights reserved.
Your safety is important to us.
Read all safety instructions before
you use the device.
WARNING! TO REDUCE THE RISK OF
FIRE, ELECTRIC SHOCK OR INJURY
PLEASE ADHERE TO THE FOLLOWING:
!
!This product complies with the
maxiumum allowable concentration
of ozone of 0.050 parts per million by
volume (ppmv) in a 24 hour period.
!Always place device on a rm, at level
surface that is secure. Do not place
device where it is likely to be bumped
or knocked over.
!Do not sit, stand, or place heavy objects
on the device.
!The device must be in the upright
position at all times.
!NEVER place containers with liquid or
drinks on top of the device. Spilling
liquids into it can damage the device
and potentially cause electric shock or
create a re hazard.
!THIS MACHINE IS NOT INTENDED
FOR USE BY CHILDREN. Keep away
from small children and pets.
!This machine is not intended for use
by persons with reduced physical,
sensory or reasoning capabilities or
lack of experience or knowledge unless
they have been given supervision or
instruction concerning the use of the
machine by a person responsible for
their safety.
!This machine is intended for household
and indoor use only. Do not use
outdoors.
!Only use the device after fully
assembled.
!Only use this device with supplied
accessories.
!Do not allow foreign objects to enter
ventilation or exhaust opening as this
may cause electric shock or damage to
the device. Do not block air outlets or
intakes.
!Do not cover the machine while in use.
!For best performance, place the
machine on the oor at least 3 feet
from any wall or appliance.
!Always follow basic precautions when
using device to reduce the risk of re,
electric shock, and personal injury.
!Ensure the electrical outlet used with
the device is not loose or damaged.
A poor electrical connection can result
in overheating and damage to the
power cord.
!To disconnect the device, make sure it
is powered off, then grip the plug and
pull it from the wall outlet. NEVER pull
the cord to unplug it.
!Do not use if the power cord or plug
is damaged.
!Keep the power cord away from hot
surfaces.
!Do not use if you believe the device
has been damaged or is faulty. If the
device is not working properly or has
been dropped or damaged, contact
customer support for repair.
!Do not route the power cord under or
cover it with carpet. Route the power
cord to minimize the possibility that
someone could trip over it.
!Do not expose the device to moisture:
avoid areas where it might come in
contact with water such as bathrooms
or laundry rooms.
!Disconnect all power to the device and
turn off all controls before unplugging.
Always unplug the machine if not in use
and while cleaning.
!The device is not user serviceable.
Do not attempt to repair the product
yourself. In the event of failure,
contact customer support for repair
or replacement.
!
Read all safety
instructions in the
quick start guide,
instruction manual,
and on device.

1
2
3
5
4
Product Overview
1. Control Panel
2. PlasmaShield™ Generators (Internal)
3. PlasmaShield™ Generators (Internal)
4. H13 True HEPA Filter
5. Bottom Cover
6. Power Cord
34Copyright © 2022 Dernier & Hamlyn Inc. All rights reserved.
Twist and detach bottom cover. Remove H13 HEPA lter from plastic bag,
and install it in device.
Replace bottom cover.
1 2
3 4
Quick Start Guide
Connect the AC adapter to the device,
plug into an outlet, and press the power
button to turn on.
6

5 6Copyright © 2022 Dernier & Hamlyn Inc. All rights reserved.
Cleaning and Maintenance
Always unplug the machine if not in use and while cleaning.
When the device is not used for an extended time, store it
in a cool dry place. Do not store the device where it might
be exposed to excess moisture or direct sunlight. May not
operate effectively in freezing temperatures. Use a dry cloth
to clean the exterior of the device. Do not use any chemicals
or cleaners.
Cleaning the Air Quality Sensor
The inlet for the air quality sensor is located at the back of
the machine as shown. The inlet should be cleaned every 2
months using a vacuum or with a cotton swab that has been
lightly moistened with clean water.
Real-Time Air Quality Indicator Ring
Good Moderate Poor
Control Panel
Timer
(2H/4H/8H) Set the timer to have
the machine turn off automatically
Sleep Mode
Lowest fan speed level that
is ultra-quiet
Plasma On/Off
Press the icon to toggle the plasma
purication function on or off
Auto Mode
Blue: Air Quality Good
Yellow: Air Quality Moderate
Red: Air Quality Poor
Filter Replacement
Indicator
After changing lter, press for
3 seconds to reset the lter life
countdown
On/Off
Powers the device on and off
Fan Speed
(1/2/3) Three fan speeds
AIR QUALITY SENSOR