Digi-Sense 92000-02 User manual

User Manual for Data Acquisition Software
Digi-Sense® Touchscreen 12-Channel
Benchtop Data Logging Thermocouple Thermometer
Model: 92000-02
THE STANDARD IN PRECISION MEASUREMENT

2
Installing DAQ Software
• Move 12ch Thermocouple DAQ Installer file to your computer.
• Run the Setup application to install the software.
• Move 12ch Thermocouple DAQ application to computer.

3
DAQ Operations:
1. Connect the 12-Channel Benchtop Data Logging Thermocouple Thermometer to the computer
with the proper USB cable. Then power on the device. This should be completed prior to start-
ing the software.
2. When the computer detects the device it will make the circle next to “Connected” blue.
3. If it is desired to not view all active channels, simply click the check mark beside the channel
indicator. Check means it will be displayed and unchecked means it will not be displayed.
4. Any of the settings for the device can be changed from this software as well. Simply click the
settings button and change the desired settings. WARNING: changing settings while the de-
vice is graphing will cause a break in the graph while the settings menu is open.
5. To start a log from the DAQ, select a log path and give the file a name. Then select the start
button. The data will then begin to save to the file on the computer. Press stop when the
desired length of the log has been reached.
6. To download internally saved logs (Discussed on pg. 11) from the device, select the Download
Log button and then select the log that is desired to be downloaded.
7. To clear the graph after a log is complete simply select the clear graph button.