La Crosse Technology 308-1410GRV2 User manual

Page 3Page 2
MODEL: 3081410GRV2
DC: 090318
For more product information visit: bit.ly/laxtech_support
WIRELESS THERMOMETER
QUICK START GUIDE
POWER UP
1. Install 2-AA batteries into your Outdoor Sensor.
2. Install 2-AA batteries into your Wireless Thermometer.
3. Place your sensor outside in a shaded location.
Sensor mounting video: bit.ly/TH_SensorMounting
AA
AA
AA
AA
1. Hold the SET/ºF/ºC button to enter the Settings Menu.
2. Press the MIN/MAX/+ button to adjust the values. Hold to
adjust quickly.
3. Press the SET/ºF/ºC button to confirm and move to the next
item.
Note: Use one button at a time in Settings Menu.
SETTINGS
Settings order:
• 12/24 Hour Time Format
• Hour
• Minutes
Outdoor Sensor
TX141Bv3 Wireless Thermometer
308-1410GRv2
• Press the SET/ºF/ºC button to select Fahrenheit or Celsius
temperature display.
FAHRENHEIT/ CELSIUS
MIN/MAX TEMPERATURE
• Press the MIN/MAX/+ button to view minimum and maximum
temperatures.
• When viewing minimum and maximum values, hold the MIN/
MAX/+ button to reset them to your current readings.
Note: The station will automatically reset these min/max values
daily at midnight (12:00 AM).
TEMPERATURE TREND ARROWS
• Updating every 30 minutes, the Trend Arrows will indicate a rise
or fall (2°F/1°C) in outdoor temperature over the past three hours.
• If no significant change has occurred, a strait or steady arrow will
be presented.
LOW BATTERY INDICATOR
• If a Low Battery Indicator is displayed in the Outdoor section,
replace batteries in the sensor.
• If a Low Battery Indicator is displayed in the Indoor section,
replace batteries in the thermometer.

Page 6Page 5Page 4
WARRANTY INFO
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product
relating to manufacturing defects in materials & workmanship.
La Crosse Technology, Ltd
2830 S. 26th St.
La Crosse, WI 54601
For Full Warranty Details, Visit: www.lacrossetechnology.com/support
CARE + MAINTENANCE
•Do not mix old and new batteries.
•Do not mix Alkaline, Lithium, standard, or rechargeable batteries.
•Always purchase the correct size and grade of battery most suitable for intended use.
•Clean the battery contacts and also those of the device prior to battery installation.
•Ensure the batteries have with correct polarity (+ / -).
•Remove batteries from equipment that will not to be used for an extended period.
•Promptly remove expired batteries.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
•Reorient or relocate the receiving antenna.
•Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
•Increase separation between equipment & receiver.
•Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any other antenna or transmitter.
Operation is subject to the following two conditions:
(1 ) This device may not cause harmful interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
CAUTION!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes or
modifications to this equipment. Such changes or modifications could void the user authority to operate the
equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed
using electronic, mechanical or chemical process without the written permission
of the publisher.
This booklet may contain errors or misprints. The information it contains is regularly checked and corrections
are included in subsequent editions. We disclaim any responsibility for any technical error or printing error, or
their consequences. All trademarks and patents are recognized.
WARNING: This product can expose you to chemicals including styrene, which is known to the State of
California to cause cancer. For more information go to: www.P65Warnings.ca.gov
SPECIFICATIONS
Indoor:
Temperature Range: 32°F to 122°F (0°C to 50°C)
Update Interval: About every 30 seconds
Outdoor:
Temperature Range: -40°F to 140°F (-40°C to 60°C)
Alkaline Batteries: -20°F to 140°F (-28.8°C to 60°C)
Lithium Batteries: -40°F to 140°F (-40°C to 60°C)
Distance: Over 330 ft. (100 meters)
RF 433MHz (open air)
Update Interval: About every 50 seconds
Power:
Wireless Thermometer: 2-AA, IEC, LR6 batteries (not included)
TX141-Bv3 Sensor: 2-AA, IEC, LR6 batteries (not included)
Battery Life:
Wireless Thermometer: Over 24 months
TX141-Bv3 Sensor: Over 24 months
Dimensions:
Wireless Thermometer: 3” L x 1.36”W x 4.17”H
(7.6 cm L x 3.4 cm W x 10.6 cm H)
TX141-Bv3 Sensor: 1.57” L x 0.79” W x 5.12” H
(4.0 cm L x 2.0 cm W x 13.0 cm H)
WE’RE HERE TO HELP!
If you require additional support, get in touch with our friendly
customer support team based out of La Crosse, WI.
Phone: [phone]
Online: bit.ly/contact_techsupport
Our knowledgeable customer support team is available:
Monday-Friday, 8am-6pm CST.
JOIN THE CONVERSATION
Ask questions, watch detailed setup videos, and provide feedback
on our social media outlets!
• The Sensor Weather Shield is designed to protect your
outdoor sensor from rain and snow.
• This shield will oer limited protection from the sun’s
heat.
• Optional purchase at: bit.ly/925-1418 *Sold Separately
SENSOR WEATHER SHIELD*