Digi DW1A User manual

OUTDOOR
PEDOMETERS
DW1A
2-functions large-digit pedometer
Features:
§Step mode : shows the number of steps moved
§Distance mode : shows the travelled distance
§Lithium battery CR2016 3V

INSTRUCTION MANUAL
FEATURES:
- PC105M2,E18M2 with STEP and DISTANCE functions
- PC105M4,E18M4 with STOPWATCH, STEP, CALORIE and DISTANCE functions
- PC105U2,E18U2 with STEP and DISTANCE functions (for DW 2A)
- PC105U4,E18U4 with STOPWATCH, STEP, CALORIE and DISTANCE functions (for DW 2A)
- Large LCD digits for easy reading
OPERATION INSTRUCTIONS:
STEP MODE:
When C is at C2 position as shown in Fig.3 the indicator will be on at the STEP position. In this mode the
display shows the number of steps moved. Depressing A for 1 sec resets the display to zero.
DISTANCE MODE:
When C is moved to the C4 position, the pedometer enters DISTANCE MODE as shown in Fig. 4a, which
shows the distance traveled corresponding to the number of steps moved. Pushing B in this mode changes
the display to as shown in Fig.4b, which is for setting of the stride of the step.
Pushing B once advance the strides by 1 where as push and hold B will advance strides at a rate of 4 Hz.
The range of the presettable stride is 30 to 150cm. The display will return to display of distance if B is not
pushed for 4 seconds.

BATTERY REPLACEMENT:
When the display becomes dim or faded out, battery replacement is necessary.
1. Remove the 3 screws at the back of the unit
2. Remove the battery in the direction
3. Replace the old battery with a flesh Lithium battery (CR2025 or equivalent).
4. Reinstall the screws at the back.
REMARK: The user should try hooking the pedometer on Different positions on the waist to attain the most
accurate measurement.