Digi Passport 48 User manual

Quick Start Guide
Digi Passport®
Welcome to your Digi product
Get started: This guide helps you with initial product setup. Need more? Find additional
supporting material for this product at www.digi.com/products/consoleservers/digipassport.
Or connect to the online documentation by scanning this code:
Digi Technical Support: Digi offers multiple support plans to help you get the most out of your
product. For information on Technical Support plans and pricing, contact us at 877.912.3444 or
visit www.digi.com/support.
Documentation feedback: To provide feedback on this documentation, send your comments
to [e-mail].
1Verify your components
Included equipment
Verify that you have all included equipment. If any item is missing or damaged, contact your supplier.
2Connect the hardware
1. Connect the power cord(s).
2. Connect the Ethernet cable.
3Assign network settings
Use the DPA utility or Digi Device Discovery Utility to configure your device:
1. Download the appropriate tool for your operating system.
a. Go to www.digi.com/products/consoleservers/digipassport.
b. Click the Utilities tab under Product Support.
c. Select your operating system from the drop-down menu, then download the DPA utility (for UNIX/Linux) or Device Discovery
Utility (for Windows).
2. Use the utility to perform initial device configuration, as needed. Alternatively, use the straight-through serial cable with the appropriate
adapter to the Passport console port, https, or SSHv2.
Note The Passport has SNMP, SSHv1 and Telnet to the command line disabled by default and http is automatically redirected to https.
If you are a power user, you can use the configuration menu.
1. Establish a serial connection through the console port (9600, 8, N, 1).
2. Log in as root with the password dbps.
3. Type the command configmenu. Select Option 1 - Network Configuration and follow the prompts.
4. Enter the IP address in the URL address bar of your browser and go to step 4, Test configuration. (The default address is 192.168.161.5.)
© 2017 Digi International Inc.
Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United States and other countries worldwide. All other trademarks mentioned in this
document are the property of their respective owners.

4Test configuration
1. Insert the RJ-45 diagnostic loop into Port 1:
2. Enter:
User ID root
Password dbps
3. Log in to port 1:
Username root
Password dbps
Verify your connection to the port by typing some text. If the text appears
correctly on the screen, the configuration is correct.
4. Click Close to exit the port.
5. On the left navigation bar, click Serial Port > Connection > Port Title #.
Installation is complete.
6. Configure the device for your application using your browser. To get back
to your Digi Passport after your initial configuration, enter the IP address in
the URL address bar and log in. Use thenavigation bar on the left to alter
your configuration.
Below is a list of available adapters and their part numbers.
Connection Adapters (in quantities of 8) Order # Application
DB-9M Modem adapter 76000702 DCE devices such as modems with DB9 female ports
DB-9F Console adapter 76000671 Bay Accelar, Nortel and other DB-9 DTE
DB-25F Console adapter 76000673 DTE devices with DB-25 male ports
DB-25M Modem adapter 76000670 DCE devices such as modems
DB-25M Console adapter 76000672 Oracle SPARC and other DTE devices with DB-25 female ports