Digital Watchdog Star-Light Plus DWC-MC553WTIR User manual

Quick Start Guide Quick Start Guide
1. The mounting surface must withstand five times the weight of
your camera.
2. Do not let the cables get caught in improper places or the electric
line cover can be damaged. This may cause a short or fire.
3. Use the mounting template to mark and drill the necessary holes in
the mounting surface.
4. The camera has a manual IR switch, located under the camera’s
lens. You can use this switch to manually turn the IR LEDs on or o
to match your installation needs.
STEP 1 – PREPARING TO MOUNT THE CAMERA
Pass the wires through the mount bracket and make all
necessary connections. Connect the BNC cable and power
cables to the camera.
STEP 2 – CABLING THE CAMERA TO
EXTERNAL DEVICES
Power
Requirements Power Consumption
DC12V DC12V (LED o): 1.98W, 165mA
DC12V (LED on): 2.62W, 218mA
Tel: [phone]
Technical Support Hours:
9:00AM – 8:00PM EST, Monday thru Friday
digital-watchdog.com
DWC-MC553WTIR
WHAT’S IN THE BOX
Color deco
rings 1 Set Template sheet 1 Set
Test video
cable 1 Set Quick Setup Guide 1 Set
Screw and
plastic
anchor-4pcs
1 Set Torque
wrench 1 Set
External
OSD and
signal
controller
1 Set
Screw &
Plasc Anchor-4pcs
External OSD &
Signal Controller
Manual Torx WrenchTemplate Sheet
Test Video Cable
Color Deco Rings
Screw &
Plasc Anchor-4pcs
External OSD &
Signal Controller
Manual Torx WrenchTemplate Sheet
Test Video Cable
Color Deco Rings
Screw &
Plasc Anchor-4pcs
External OSD &
Signal Controller
Manual Torx WrenchTemplate Sheet
Test Video Cable
Color Deco Rings
Screw &
Plasc Anchor-4pcs
External OSD &
Signal Controller
Manual Torx WrenchTemplate Sheet
Test Video Cable
Color Deco Rings
Screw &
Plasc Anchor-4pcs
External OSD &
Signal Controller
Manual Torx WrenchTemplate Sheet
Test Video Cable
Color Deco Rings
Screw &
Plasc Anchor-4pcs
External OSD &
Signal Controller
Manual Torx WrenchTemplate Sheet
Test Video Cable
Color Deco Rings
Screw &
Plasc Anchor-4pcs
External OSD &
Signal Controller
Manual Torx WrenchTemplate Sheet
Test Video Cable
Color Deco Rings
EXTERNAL CONTROLLER
IR Switch
ON/OFF
Attention: This document is intended to serve as a quick reference for
initial set-up. It is recommended that the user read the entire instruction
manual for complete and proper installation and usage.
NOTE: Download all your support materials and tools in one place
1. Go to: http://www.digital-watchdog.com/resources
2. Search your product by entering the part number in
the ‘Search by Product’ search bar. Results for
applicable part numbers will populate automatically
based on the part number you enter.
3. Click ‘Search’. All supported materials, including manuals
and quick start guide (QSGs) will appear in the results.

Quick Start Guide
1. The camera supports HD-Analog, HD-CVI and HD-TVI signals. To
switch between the signals:
a. Enter the camera’s OSD menu. You can access it locally from
using the camera’s joystick in the body of the camera, or from a
recorder supporting UTC communication. Go to SETUP >
OUTPUT > ANALOG MODE.
b. Set the camera’s analog signal output from the following
options:
• HD-A: supports 5MP/1944p @ 20fps and 12.5fps, 4MP/1440p
@ 30fps, 2.1MP/1080p @ 30fps and 720p @ 30fps.
• HD-T: supports 5MP/1944p @ 20fps, 4MP/1440p @ 30fps,
2.1MP/1080p @ 30fps and 720p @ 30fps.
• HD-C: supports 4MP/1440p @ 30fps, 2.1MP/1080p @ 30fps
and 720p @ 30fps.
• CVBS: supports up to 960H @ 30fps
c. Change CONFIRM to ON to save the changes.
d. Go to the EXIT menu and select SAVE&EXIT to save all changes.
The camera signal automatically.
1. Once all cables have been connected, use the screws included
with the camera to properly mount and secure the camera to the
mounting surface.
2. Adjust the camera’s pan, tilt and position to achieve the desired
view. The cameras’ max angles are:
Pan: 0° ~ 360°
Tilt: 0° ~ 70°
Rotation: 0° ~ 360°
3. Once the installation is complete, remove the protective film from
the camera’s dome cover. To remove it, loosen the screw on the
decorative ring and rotate the ring counter-clockwise to remove.
STEP 4 – INSTALLING THE CAMERASTEP 3 – CHANGING THE SIGNAL IN
THE CAMERA
Rev Date: 06/19
Copyright © Digital Watchdog. All rights reserved.
Specifications and pricing are subject to change without notice.
Rotation 360°
Panning 360°
Tilting 70°