Digital Watchdog DWC-C232D User manual

ABOUT MANUAL
Before installing and using the camera, please read this manual carefully.
Be sure to keep it handy for future reference.
High Resolution Box Camera
DWC-C232D
DWC-C232T
08092012

2
PRECAUTIONS
Do not open or modify.
Do not open the case except during maintenence and installation,
for it may be dangerous and can cause damages.
Do not put objects into the unit.
Keep metal objects and flammable substances from entering the camera.
It can cause fire, short-circuits, or other damages.
Be careful when handling the unit.
To prevent damages, do not drop the camera or subject it to shock or vibration.
Do not install near electric or magnetic fields.
Protect from humidity and dust.
Protect from high temperature.
Be careful when installing near the ceiling of kitchen or a boiler room,
as the temperature may rise to high levels.
Cleaning:
To remove dirt from the case, moisten a soft cloth with a soft detergent solution and wipe.
Mounting Surface:
The material of the mounting surface must be strong enough to support the camera.
FCC COMPLIANCE
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference. when the equipment is operated in a residential environment. This
equipment generates, uses, and radiates radio frequency energy; and if it is not installed and used in
accordance with the instruction manual, it may cause harmful interference to radio communications.
WARNING: Changes or modifications are not expressly approved by the manufacturer.

3
TABLE OF CONTENTS
Introduction
Installation
Troubleshooting
Warranty Information
Specifications
Features
Parts and Descriptions
Dimensions
Inside the Box
Mount Installation Instructions
Adjustment of Focus
4
5
6
7
8-9
10
11
12-13
14-15

4
FEATURES*
1/3” Sony Super HAD CCD II
570 TV Lines (B&W), 540 TV Lines (Color)
Electronic Day and Night [DWC-C232D Only]
TDN (True Day and Night/ TDN5) [DWC-C232T Only]
Ultra Low Light Sensitivity
BLC (Backlight Compensation)
HME (Highlight Masking Exposure)
Programmable Privacy Zones (4) & Motion Detection
Easy Icon Driven OSD Menu with Built-In Joystick
Auto Sensing 12VDC or 24VAC with Line Lock
RS-485 Built-in
Compatible with C or CS Mount Lens (Not Included)

5
PARTS & DESCRIPTION*
Lens Connector
Box Camera
Mounting Bracket Connectors
A-Iris Socket
Back Focus
Alarm +/-
RS485 Connector
OSD Control Arrows and Enter Buttons
Power LED
BNC Video Output
AC / DC Power Input Terminal Block
1
2
3
8
9
10
11
4
5
6
71
2
3
4
5
8
9
10 11
67

119.7(4.71”)
14.5(0.57”)
47.6
(1.87”)
62.0(2.44”)
119.7(4.71”)
131.8(5.19”)
58.8(2.31”)
55.0(2.17”)
62.0(2.44”)
58.8(2.31”)
55.0(2.17”)
6
DIMENSIONS IN MILLIMETERS (IN)*

7
INSIDE THE BOX*
Included with C2 Box Camera
1
2
5
6
3
4
Color Box
User Manual
Mini-DIN Connector (For Video or DC Auto Iris Lens)
Adapter Ring for “C” Type Lenses
Two-Port Terminal Block (for AC or DC Power Connection)
Cable Extension for Alarm In / Out and RS-485
5
6
ABOUT MANUAL
Before installing and using the camera, please read this manual carefully.
Be sure to keep it handy for future reference.
High Resolution Box Camera
DWC-C232D
DWC-C232T
07062012

INSTALLATION*
Using an appropriate mounting bracket, mark and drill the
necessary holes to mount the bracket to a wall or ceiling.
Attach the mounting bracket to the surface using machine screws.
Attach the box camera to the mounting bracket.
Adjust the camera’s position. Consult the manual of the
mounting bracket for additional information.
1
2
3
4
8

INSTALLATION*
Connect an appropriate lens to the camera lens connector by twisting the lens clockwise.
The camera is compatible with any C or CS mount lens. For “C” lenses, please use the provided
Adapter Ring. See page 10 for details. *Lens is not included.
Connect the lens’ cable to the box’s A-Iris Socket.
Adjust the lens’ zoom and focus accordingly. Consult the manual of the lens for additional
information.
5
6
7
9

Please make sure the lens is C or CS Mount.
To use C Mount lens, please insert the included C ring to the lens; then insert the lens.
To use CS Mount lens, fix the lens directly into the front camera without the C ring.
To adjust the focus, slide the focus lever on the side of the front camera.
Please tighten the focus lever after the adjustment in order to prevent being out of focus.
Focus Adjustment
10
ADJUSTMENT OF BACK FOCUS*
1
2
3