Digital Watchdog Starlight V3363D User manual

5436 W Crenshaw St. Tampa, FL 33634
Tel: [phone]
Fax: [phone]
www.Digital-Watchdog.com
[email protected]
Technical Support Hours: Monday-Friday
8:30am to 8:00pm Eastern Time
Before installing and using the camera, please read this manual carefully.
Be sure to keep it handy for future reference.
ABOUT MANUAL
01312012
User Manual
V3363D, V3363D922
V3363DH
V3367WD, V3367WTIR
Vandal Dome Camera

32
■ Do not open or modify.
■ Do not open the case except during maintenance and installation,
for it may be dangerous and can cause damages.
■ Do not put objects into the unit.
■
Keep metal objects and ammable substances from entering the camera. It can cause re, short- circuits,
or other damages.
■ Be careful when handling the unit.
■To prevent damages, do not drop the camera or subject it to shock or vibration.
■Do not install near electric or magnetic elds.
■Protect from humidity and dust.
■Protect from high temperature.
■
Be careful when installing near the ceiling of a kitchen or a boiler room, as the temperature may rise to
high levels.
■Cleaning
■To remove dirt from the case, moisten a soft cloth with a soft detergent solution and wipe.
■Mounting Surface
■The material of the mounting surface must be strong enough to support the camera.
PRECAUTIONS
Before sending your camera for repair, check the following or contact our technical specialist.
No VIDEO
Check the coaxial cable and make sure it is connected securely.
Check the lens’iris adjustment at the menu setup of the camera.
Check the power supply and make sure the camera has the proper voltage and current.
Out-of-Focus VIDEO
Check the clear dome cover and the lens for dirt or ngerprints. Use a soft cloth and gently clean.
Check the lens manual focal and zoom adjustment. Field test monitor is recommended.
TROUBSHOOTING
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to Provide reasonable protection against harmful
interference .when the equipment is operated in a residential environment.This equipment generates, uses,
and radiates radio frequency energy; and if it is not installed and used in accordance with the instruction
manual, it may cause harmful interference to radio communications.
WARNING :Changes or modications are not expressly approved by the manufacturer.
FCC COMPLIANCE

54
FEATURES*- V3363D FEATURES*- V3363D922
■1/3" High Resolution CCD
■High Resolution 560 TV Lines
■3.3 ~ 12mm Varifocal Auto Iris Lens
■Electronic Day and Night
■Star-Light (Super Low LightTechnology)
■DRC (Dynamic Range Compressor)
Dark spots in images particularly become more visible without overexposing the bright
spots to create one perfect image.
■3D-DNR (3D Digital Noise Reduction)
Produces less noise and more color during low-light application.
■HME (Highlight Mask Exposure)
Masks overly exposed light to produce a true video image of any environment.
■BLC (Back Light Compensation)
■Programmable Privacy Zone (8) & Motion Detection
■Easy Icon Driven OSD Menu with Built-In Joystick
■Auto Sensing 12VDC or 24VAC with Line Lock
■No Fog or Condensation under AnyWeather Condition
■1/3" High Resolution CCD
■High Resolution 560 TV Lines
■9~22mm Varifocal Auto Iris Lens
■Electronic Day and Night
■Star-Light (Super Low LightTechnology)
■DRC (Dynamic Range Compressor)
Dark spots in images particularly become more visible without overexposing the bright
spots to create one perfect image.
■3D-DNR (3D Digital Noise Reduction)
Produces less noise and more color during low-light application.
■HME (Highlight Mask Exposure)
Masks overly exposed light to produce a true video image of any environment.
■BLC (Back Light Compensation)
■Programmable Privacy Zone (8) & Motion Detection
■Easy Icon Driven OSD Menu with Built-In Joystick
■Auto Sensing 12VDC or 24VAC with Line Lock
■No Fog or Condensation under AnyWeather Condition

76
FEATURES*- V3363DH FEATURES*- V3367WD
■1/3" High Resolution CCD
■High Resolution 560 TV Lines
■3.3~12mm Varifocal Auto Iris Lens
■Electronic Day and Night
■Star-Light (Super Low LightTechnology)
■DRC (Dynamic Range Compressor)
Dark spots in images particularly become more visible without overexposing the bright
spots to create one perfect image.
■3D-DNR (3D Digital Noise Reduction)
Produces less noise and more color during low-light application.
■HME (Highlight Mask Exposure)
Masks overly exposed light to produce a true video image of any environment.
■BLC (Back Light Compensation)
■Programmable Privacy Zone (8) & Motion Detection
■Easy Icon Driven OSD Menu with Built-In Joystick
■Auto Sensing 12VDC or 24VAC with Line Lock
■Built-in Heater , Withstand Temperatures as Low as -40°F
■No Fog or Condensation under AnyWeather Condition
■1/3”Sony Super HAD II CCD
■High Resolution 560 TV Lines
■3.3~12mm Varifocal Auto Iris Lens
■Electronic Day and Night
■Star-Light (Super Low LightTechnology)
■DRC (Dynamic Range Compressor)
Dark spots in images particularly become more visible without overexposing the bright
spots to create one perfect image.
■3D-DNR (3D Digital Noise Reduction)
Produces less noise and more color during low-light application.
■HME (Highlight Mask Exposure)
Masks overly exposed light to produce a true video image of any environment.
■SLC (Side Light Compensation)
■DIS (Digital Image Stabilizer)
■Programmable Privacy Zone (6) & Motion Detection
■Easy Icon Driven OSD Menu with Built-In Joystick
■Auto Sensing 12VDC or 24VAC with Line Lock
■No Fog or Condensation under AnyWeather Condition

98
DIMENSIONS IN MILLIMETERS*
1. ROTATE ZOOM LEVER TO DISPLAY DESIRED VIEW.
2. ROTATE FOCUS LEVER TO ADJUST THE FOCUS.
FEATURES*- V3367WTIR
■1/3”Sony Super HAD II CCD
■High Resolution 560 TV Lines
■3.3~12mm Varifocal Auto Iris Lens
■100ft Range IR with Intelligent Camera Sync
■True Day & Night / TDN5 (Electro Magnetic Mechanism)
■Star-Light (Super Low LightTechnology)
■Max-DR (Electronic Wide Dynamic Range)
Enables the camera to capture perfect images in both bright and dark environments
simultaneously.
■3D-DNR (3D Digital Noise Reduction)
Produces less noise and more color during low-light application.
■HME (Highlight Mask Exposure)
Masks overly exposed light to produce a true video image of any environment.
■SLC (Side Light Compensation)
■DIS (Digital Image Stabilizer)
■Programmable Privacy Zone (6) & Motion Detection
■Easy Icon Driven OSD Menu with Built-In Joystick
■Auto Sensing 12VDC or 24VAC with Line Lock
■No Fog or Condensation under AnyWeather Condition
61.8 91.0
R2.5
91.0
VIDEO(yellow)
BNC JACK
RED
BLACK
L=300mm
DC12V or AC24V
5mm TWIST SOLD DERING
85.0
85.0
47.8 32.8
ø140.1
102.0

1. Mounting Template
2. User Manual
3. Security L-Key
4. Single Sided Hex Key
5. Double Sided Hex Key
6. Secondary BNC Cable for Field
Monitor
7. Four (4) Screws and Four (4) Dry
Wall Anchors
8. 3 Axis Gimbal Guide
Camera Installation
Use the mounting template to mount the camera.
Using the security L-key to loosen the four screws that secure the vandal proof dome cover,
Remove the vandal proof dome cover to access the screw holes to mount the camera.
NOTE: Keep the lens and the vandal proof cover free from dust or ngerprint.
INSTALLATION*INSTALLATION*
A. Use the supplied L Wrench to remove the four xing
screws from the dome cover.
B. Align the camera unit with the surface of the ceiling.
Draw marks on the ceiling in the places where the
screw holes will be drilled. Drill the four holes.
C. Cut a small hole in the ceiling for the cables.
D. Pass the power cable and video cable from the camera
unit through the cable hole in the ceiling.
E. Align the four screw holes in the camera unit with the
screw holes on the ceiling, and then secure the camera
in place by tightening the four screws through the
washers.
F. Carry out the settings and adjustments for the camera.
G. Secure the dome cover by tightening the screws.
1
2
3 4 5 6
7
8
1110
D
F
G
E
C
B
A

CONNECTION*
CAUTION : CHECK FOR POLARITYWHEN USING A DC12V POWER SUPPLY.
12VDC/24VAC VIDEO OUT
300.0
CMAERA SETTINGS*
1. Set the zoom level as desired positiong by moving Zoom lever.
2. Set the Focus level as the image is focussed by moving Focus lever.
■ LENS ADJUSTMENT
a. Focus lever
b. Zoom Lever
1312

CAMERA SETTING FOR SIDE OSD CONTROL BOARD
*
CAUTION : CHECK FOR POLARITY WHEN USING A DC12V POWER SUPPLY.
2nd Video
JoyStick Key
Joystick Key
The functions of joystick are
camera zoom in/out and OSD
control.
2nd Video
VideoTest output connector.
MODULE OSD MENU*-V3363D, V3363D922, V3363DH
1514
EXPOSURE COLOR DAY&NIGHT
BRIGHTNESS
AE PREFERENCE
BLC / HME
AGC
STARLIGHT
NIGHT-UP
WB MODE
R-Y GAIN
B-Y GAIN
D&N MODE
C_SUP
A_SUP
FUNCTION MOTION PRIVACY
MIRROR
SHARPNESS
FREEZE
D-ZOOM
3D DNR
DRC
MOTION PRIVACY
SYNC SETUP EXIT
SYNC TITLE EDIT
PC CONTROL
(RS485 Control)
LANGUAGE
MONITOR
OSD COLOR
OMNI LENS
DEFECT
EXIT
SAVE & EXIT
FACTORY SET

EXPOSURE
BRIGHTNESS 0 ~ 100
SHUTTER 1/60 / FLK / 1/250 ~ 10000 / STARLIGHT x2 ~ x256
BLC/HME OFF / BLC / HME
AGC HIGH / MIDDLE / LOW / OFF
AGC(Auto Gain Control)
STARLIGHT AUTO(x2 ~ x256) / OFF
NIGHT-UP NORMAL / HIGH
EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET
COLOR
WB MODE AWC / AWT / PUSH LOCK / MANUAL / INDOOR / OUTDOOR
R-Y GAIN 0 ~ 100
B-Y GAIN 0 ~ 100
EXIT JUMP
DAY & NIGHT
Day & Night Mode
AUTO : READ TIME(0~63) / S-LEVEL / E-LEVEL
COLOR---->BW : B&W : Switching from COLOR to BW; If the number is higher, the camera
will only switch during a super low light condition
BW ---->COLOR : Switching from BW to COLOR; This number should be always lower than
COLOR to BW
Read Time : time interval to switch from COLOR to BW
COLOR
B&W Mode : BURST (OFF / ON) There is less noise when the BURST is OFF.
SMART IR (OFF / ON)
C-SUP Color Suppression :
Color will be reduced at low illumination, if the C-SUP Level is set higher. 0 ~ 63
A-SUP Aperture Suppression : The sharpness of the edges will be reduced at low illumination, if
A-SUP level is set higher. 0 ~ 15
EXIT JUMP
FUNCTION
MIRROR OFF/MIRROR/V-FLIP/ROTATE
SHARPNESS 0 ~ 31
FREEZE OFF / ON
NEG.IMAGE OFF / ON
D-ZOOM OFF / ON (x1.0 ~ x32 PTZ)
3D-DNR ON (0~100) / OFF
3D Digital Noise Reduction
DRC OFF / INDOOR / OUTDOOR
Dynamic Range Compressor
EXIT JUMP
MOTION (OMNI-Plus Camera Only)
MOTION
OFF
ON
AREA SELECT (AREA 1~4)
AREA SET (POSITION / SIZE)
SENSITIVITY (0~40)
MOTION TRACE (OFF / ON)
MOTION VIEW (OFF / ON)
RETURN
EXIT JUMP
PRIVACY
PRIVACY
OFF
ON
AREA SELECT (1~8)
AREA SET (POSITION / SIZE)
COLOR (0~15)
RETURN
EXIT JUMP
OSD MENU*-V3363D, V3363D922, V3363DH
1716

SYNC
SYNC INTERNAL / AUTO
EXIT JUMP
SETUP
TITLE EDIT OFF / ON
PC CONTROL
(RS485 Control)
CAM ID / ID DISPLAY (OFF/ON) / BAUDRATE (2400/4800/9600/19200/38400/57600)
The protocol is xed pelco-D.
LANGUAGE ENG / KOR / JPN / CHN1 / CHN2 / RUS / FRAN / SPAN / ITAL
MONITOR CRT / LCD / USER
Select LCD only if the camera is directly connected to the LCD monitor.
OSD COLOR 0 ~ 15
OMNI LENS
OFF (OMNI-Plus Camera Only)
ON
ALARM / READ TIME / ALARM ZOOM / STAND BY / RETURN
DEFECT WHITE DEFECT CANCEL MODE
EXIT JUMP
EXIT
EXIT
SAVE&EXIT
FACTORY SET
1918
MODULE OSD MENU*-V3367WD, V3367WTIR
EXPOSURE COLOR DAY&NIGHT
BRIGHTNESS
E.SHUTTER
BLC
MAX_DR
AGC
STARGLIGHT
WB MODE
R-Y GAIN
B-Y GAIN
D&N MODE
C_SUP
A_SUP
FUNCTION MOTION PRIVACY
MIRROR
SHARPNESS
GAMMA
FREEZE
NEGA.
3D DNR
D-ZOOM
SLC
HME
DIS
MOTION MASK 1
MASK 2
MASK 3
MASK 4
MASK 5
MASK 6
SYNC SETUP EXIT
SYNC MODE CAMERA ID
TITLE
DPC
MONITOR
LANGUAGE
BAUDRATE
OMNI LENS
EXIT
SAVE & EXIT
FACTORY RESET