Digital Watchdog V2262D Series User manual

V2262D Series
About manual
INSTRUCTION MANUAL
Before installing and using the camera, please read this
manual carefully.
Be sure to keep it handy for future reference.
5436 W Crenshaw Street
Tampa, FL 33634
www.digital-watchdog.com
Technical Support : 1-866-446-3595 / 813-888-9555
Before installing and using the camera, please read this
manual carefully.
Be sure to keep it handy for future reference.
5436 W Crenshaw Street
Tampa, FL 33634
www.digital-watchdog.com
Technical Support : 1-866-446-3595 / 813-888-9555

PRECAUTIONS
Before installing and using the camera, please read this manual
carefully.
Be sure to keep it handy for later reference.
UNPACKING
Care should be taken when the unpacking the shipped unit.
Check the parts list and confirm all items are included in.
Contact … .. If a problem is noted.
■Do not open or modify
Do not open the case except during maintenance and installation,
as it may be dangerous and cause damages.
■Do not put objects inside the unit
Make sure that no metal objects or flammable substances
get inside the camera. It could cause fire, short-circuits or damages.
■Be careful when handling the unit
To prevent damage, do not drop the camera or subject it to
strong shock or vibration.
■Install away from electric or magnetic fields
■Protect from humidity and dust
■Protect from high temperature
Be careful when installing close to the ceiling , in a kitchen or boiler
room, as the temperature may rise to high levels.
■Cleaning
Dirt can be removed from the case only by wiping it with a soft cloth
moistened with a soft deter
g
ent solution.
Before installing and using the camera, please read this manual
carefully.
Be sure to keep it handy for later reference.
UNPACKING
Care should be taken when the unpacking the shipped unit.
Check the parts list and confirm all items are included in.
Contact … .. If a problem is noted.
■Do not open or modify
Do not open the case except during maintenance and installation,
as it may be dangerous and cause damages.
■Do not put objects inside the unit
Make sure that no metal objects or flammable substances
get inside the camera. It could cause fire, short-circuits or damages.
■Be careful when handling the unit
To prevent damage, do not drop the camera or subject it to
strong shock or vibration.
■Install away from electric or magnetic fields
■Protect from humidity and dust
■Protect from high temperature
Be careful when installing close to the ceiling , in a kitchen or boiler
room, as the temperature may rise to high levels.
■Cleaning
Dirt can be removed from the case only by wiping it with a soft cloth
moistened with a soft detergent solution.
■Mounting Surface
The mounting surface material must be strong enough to support
the camera.

TROUBLESHOOTING
Before sending the camera out for repair, check the items below.
If the problem persists after checking these items, contact your service
center.
■If no image appears
Is the coaxial cable attached securely?
Are the power and voltage normal?
Has the iris of the lens inside the camera been
adjusted correctly (with the level volume) ?
Is there adequate illumination?
■If the image is unclear
Is the lens in focus?
Is the lens dirty?
Dirt or fingerprints on the lens can adversely affect the
images. Gently wipe any dirt or fingerprints off the lens
with a soft cloth or lens cleaning paper and cleaning
fluid (commercially available).
Before sending the camera out for repair, check the items below.
If the problem persists after checking these items, contact your service
center.
■If no image appears
Is the coaxial cable attached securely?
Are the power and voltage normal?
Has the iris of the lens inside the camera been
adjusted correctly (with the level volume) ?
Is there adequate illumination?
■If the image is unclear
Is the lens in focus?
Is the lens dirty?
Dirt or fingerprints on the lens can adversely affect the
images. Gently wipe any dirt or fingerprints off the lens
with a soft cloth or lens cleaning paper and cleaning
fluid (commercially available).
Is the monitor adjusted correctly?
WARNING:
TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.

DIMENSION (mm)

INSTALLATION
A
B
D
E
F
G
H
A
B
C
D
E
F
G
H

INSTALLATION (cont.)
A. Cut the hole in the ceiling for routing the cables.
B. Loosen the screws from the dome cover.
C. Detach the dome cover from bottom case.
D. Loosen the screws and separate the gimbal.
E. Align the camera unit with the surface of the ceiling, make 3 marks, and
then drill the holes.
F. Pass the power cable and video cable through the cable hole in the ceiling.
G. Match the holes of camera unit with the holes in the ceiling and then fix the
camera unit by tightening screws.
H. Set the gimbal in desired position and tighten the screw.
I. Carry out the settings and adjustment for the camera.
A. Cut the hole in the ceiling for routing the cables.
B. Loosen the screws from the dome cover.
C. Detach the dome cover from bottom case.
D. Loosen the screws and separate the gimbal.
E. Align the camera unit with the surface of the ceiling, make 3 marks, and
then drill the holes.
F. Pass the power cable and video cable through the cable hole in the ceiling.
G. Match the holes of camera unit with the holes in the ceiling and then fix the
camera unit by tightening screws.
H. Set the gimbal in desired position and tighten the screw.
I. Carry out the settings and adjustment for the camera.
J. Assemble dome cover with bottom case.
K. Tighten the screws back on the dome cover.

DC12V
CONNECTION
CAUTION :
Check for polarity when using a DC 12V power supply.

LENS ADJUSTMENT
B. Focus lever
A. Zoom Lever
A. Set the zoom level to the desired position by moving Zoom lever.
B. Set the Focus by moving Focus lever.
B. Focus lever
A. Zoom Lever

WARRANTY INFORMATION
Digital Watchdog (referred to as “the Warrantor”) warrants the Camera
Series against defects in materials or workmanship as follows:
LABOR: For the initial five (5) years from the date of original purchase, if the
camera is determined to be defective, the Warrantor will repair or replace the
unit, with
new or refurbished product at its option, at no charge.
PARTS: In addition, the Warrantor will supply replacement parts for the initial
five (5) years.
To obtain warranty or out of warranty service, please contact a Technical
Support Representative at 1-866-446-3595 Monday through Friday from 9:00
AM to 5:00 PM Eastern.
A purchase receipt or other proof of the date of the original purchase is
required before warranty service is rendered. This warranty only covers
failures due to defects in materials and workmanship which arise during
normal use This warranty does not cover damage which occurs in shipment
Digital Watchdog (referred to as “the Warrantor”) warrants the Camera
Series against defects in materials or workmanship as follows:
LABOR: For the initial five (5) years from the date of original purchase, if the
camera is determined to be defective, the Warrantor will repair or replace the
unit, with
new or refurbished product at its option, at no charge.
PARTS: In addition, the Warrantor will supply replacement parts for the initial
five (5) years.
To obtain warranty or out of warranty service, please contact a Technical
Support Representative at 1-866-446-3595 Monday through Friday from 9:00
AM to 5:00 PM Eastern.
A purchase receipt or other proof of the date of the original purchase is
required before warranty service is rendered. This warranty only covers
failures due to defects in materials and workmanship which arise during
normal use. This warranty does not cover damage which occurs in shipment
or failures which are caused by products not supplied by the Warrantor or
failures which result from accident, misuse, abuse, neglect, mishandling,
misapplication, alteration, modification, faulty installation, set-up adjustments,
improper antenna, inadequate signal pickup, maladjustment of consumer
controls, improper operation, power line surge, improper voltage supply,
lightning damage, rental use of the product or service by anyone other than
an authorized repair facility or damage that is attributable to acts of God.

LIMITS AND EXCLUSIONS
There are no express warranties except as listed above. The Warrantor will
not be liable for incidental or consequential damages (including, without
limitation, damage to recording media) resulting from the use of these
products, or arising out of any breach of the warranty. All express and implied
warranties, including the warranties of merchantability and fitness for
particular purpose, are limited to the applicable warranty period set forth
above.
Some states do not allow the exclusion or limitation of incidental or
consequential
damages, or limitations on how long an implied warranty lasts, so the above
exclusions or limitations may not apply to you. This warranty gives you
specific legal rights and you may also have other rights that vary from state to
state.
If the problem is not handled to your satisfaction, then write to the Address
above.
LIMITS AND EXCLUSIONS
There are no express warranties except as listed above. The Warrantor will
not be liable for incidental or consequential damages (including, without
limitation, damage to recording media) resulting from the use of these
products, or arising out of any breach of the warranty. All express and implied
warranties, including the warranties of merchantability and fitness for
particular purpose, are limited to the applicable warranty period set forth
above.
Some states do not allow the exclusion or limitation of incidental or
consequential
damages, or limitations on how long an implied warranty lasts, so the above
exclusions or limitations may not apply to you. This warranty gives you
specific legal rights and you may also have other rights that vary from state to
state.
If the problem is not handled to your satisfaction, then write to the Address
above.
Service calls which do not involve defective materials or workmanship as
determined by the Warrantor, in its sole discretion, are not covered. Costs of
such service calls are the responsibility of the purchaser.

Model V2262D
Camera TYPE Color Anti-Vandal Digital Dome Camera
Mount Surface
Image Device Super HAD CCD
Size 1/3"
Pixels-Total 537(H) x 505(V)
Pixels-Effective 510(H) x 492(V)
Scanning System 525 line, 2:1Interlace
Horizontal Frequency Internal Mode 15,734Hz
Vertical Frequency Internal Mode 59.94Hz
Min. Scene Illumination F1.5 0.2 Lux
Functions(Programmable) AM/ME AM/ME Mode
Flicker less ON / OFF
AWB ATW / AWB
BLC ON/OFF
AGC ON/OFF
Lens Focal Length 3.3 ~ 12mm
Resolution Horizontal 420 TV Lines
Video Output VBS 1.0Vp-p VBS 1.0Vp-p(75 Load)
S/N Ratio S/N Ratio 48dB
OSD OSD NO
Environmental Conditions Operating Temperature -10℃~ +55℃(14℉~ 131℉)
Humidity Less than 90%
Power Power Requirement 12VDC
Power Consumption DC12 [V]: 86[mA]
Physical Specification Dimensions(φx H) 112 x 78.3mm