Digital Watchdog Blackjack BOLT DW-BJBOLT2T-LX User manual

WHAT’S IN THE BOX
Bolt™ server 1 Keyboard and mouse 1 set
Quick start guide 1Power cable 1 set
State of the art hyper-optimized video management platform designed for ease, speed and eciency.
Blackjack® Bolt™ — Up to 16 2.1MP/1080p cameras (true HD resolution)
DW-BJBOLT2T-LX DW-BJBOLT4T-LX DW-BJBOLT6T-LX DW-BJBOLT8T-LX DW-BJBOLT12T-LX DW-BJBOLT16T-LX
Quick Start Guide
Tel: [phone]
Technical Support Hours: 9:00AM – 8:00PM EST, Monday through Friday
digital-watchdog.com
Attention: This document is intended to serve as a quick reference for initial setup.
See the DW Spectrum® IPVMS full manual for more information on features and functionality.
NOTE: Download all your materials and tools in one place.
1. Go to: http://www.digital-watchdog.com/support-download/.
2. Search your product by entering the part number in the ‘Search by Product’ search bar. Results for applicable part
numbers will populate automatically based on the part number you enter.
3. Click ‘Search’. All supported materials, including manuals, Quick start guides (QSG), software and firmware will appear in
the results.
Default Login Information for DW Spectrum® IPVMS
Username: admin Password: admin12345
Default login information for the server’s OS
Username: dwuser Password: Dw5pectrum

BLACKJACK® BOLT HARDWARE
SPECIFICATIONS
F1
F6
F2
F5F4 F3
2
B1 AC power socket
B2 PS/2 keyboard and
PS/2 mouse ports
B3 DVI-D port
B4 HDMI port
B5 USB 2.0 ports
B6 Mic in (pink)
B7 Line out (green)
B8 Line in (blue)
B9 Ethernet port to the camera network
B10 Ethernet port to the local network
B11 USB 3.0 ports
B12 D-Sub port
F1 HDD LED
F2 Power button / Power LED
F3 USB 2.0 port
F4 Microphone jack
F5 Headphone jack
F6 Reset button
WARNING For an optimal system configuration, it is recommended that a UPS (Uninterrupted Power Supply) be used to power
the setup.
Dual monitors are not recommended due to CPU performance. To connect two monitors to the server, go to the
display setup to activate the second monitor.
Front
B9
B1 B2 B3 B4 B6B5
B12 B10B11
B7
B8
Back
MODEL Blackjack® Bolt™
Included IP licenses 4
Form factor Slim desktop
Operating system Linux® Ubuntu®
CPU Intel® quad core™ processor
Memory
NIC 2x gigabit Ethernet (RJ45)
System Max. video storage rate (Mbps) 80 Mbps
Storage Maximum hard drives 2 x HDD
Maximum storage 16TB
Video-out Outputs True HD output, DVI or D-Sub port
Resolution HD 1080p
Pre-loaded VMS software DW Spectrum®IPVMS
Unlimited remote clients Cross platform - Windows®, Linux®and Mac®
Mobile apps iOS®and Android®
Keyboard and mouse Included
Power 200W **
Operating temperature and humidity 41°F-104°F / 20-90% RH
Dimension (WxDxH) (inches) 3-7/8” x 14” x 10-3/8” (standing)
10-3/8” x 14” x 3-7/8” (desktop)
Warranty 5 year limited
** UPS Recommended
Specifications and components mentioned are subject to change without notice.
Default Login Information for DW Spectrum® IPVMS
Username: admin Password: admin12345
Default login information for the server’s OS
Username: dwuser Password: Dw5pectrum
8GB

SETTING UP THE SERVER
STEP 1: Connect external devices, power and network.
1. Connect a monitor, USB keyboard, USB mouse and network cable to one of the Ethernet ports (B9 on the diagram).
Configure the camera’s network first, then configure the server’s local network.
2. Connect the server to an appropriate power source. It is recommended to use a 750VA or higher UPS system.
3. Power up the server if the server does not turn on automatically by pressing the power button on the front of the
server. (F2 on the diagram).
* Connecting the power cable to the live power source may turn on the server automatically.
3
Quick Start Guide
Camera Network POE Switch
Blackjack BOLT
Monitor
Keyboard Mouse
UPS System
B9

4
STEP 2: Configure date and time
1. Open settings > Details
3. Click Date &Time
4. Turn OFF Automatic Date & Time and Automatic Time Zone
5. Click Date & Time and set correct date and time
6. Click Time Zone and set to correct Time zone. (type one of the largest cities in the time zone)
7. Close Settings.

5
Quick Start Guide
STEP 3: Configure network
Please have the following information ready before starting the network configuration.
* Camera network and local network cannot be on the same network.
Camera network Local network (LAN)
IP address
Subnet mask / Netmask
Default gateway / Gateway Not applicable
DNS servers Not applicable
NOTE The Blackjack® server’s network settings are set to DHCP as default.
NOTE If you are not sure what information to enter, contact your Network Administrator or Internet
Service Provider for the information.
1. Open Settings
2. Open Network
3. Click Setting of the Ethernet that is Connected

6
NOTE If you are not connecting to the Blackjack®from the same network, you may be required to perform
port forwarding on your router to access the server. Contact your Network Administrator or Installer for
additional information
9. Click Apply to save
10. Connect the network cable and verify the connection.
7. Click Settings of the Ethernet not connected.
6. Restart the connection by switching OFF then turn ON.
5. Click Apply to save
8. Change to Manual then enter Address, Netmask, Gateway then DNS.
4. Change to Manual then enter Address, Netmask , Gateway.
* Do not enter Gateway information if there is no Gateway in this network.

7
Quick Start Guide
SETTING UP DW SPECTRUM® MEDIA SERVER
3. Enter the password and click connect.
*Default password: admin12345 (case sensitive).
STEP 2: To rename the server
1. Right-click on the server name listed on the resources then click server settings.
STEP 1: Initial run from the Blackjack®server
1. Open the DW Spectrum®client by double click on the DW Spectrum®icon.
2. Click on the pre-configured server.
Login: admin
Password: admin12345

8
STEP 3: To check for updates
1. Click on the menu then click “System Administration”.
2. Go to the updates tab. If the system requires updating, click on the update system button.
*If you are on the latest version, it will say “You have the latest version installed” and the Update System button will be
disabled.
2. Go to the general tab and enter the new server name in the name field. Click OK.

9
Quick Start Guide
STEP 5: Configure recording
1. Right-click on a camera in the resource tree to setup recording. Click on camera settings from the context menu.
3. Click OK to when the license key is activated.
STEP 4: Enter and activate licenses
1. Go to the system administration window and click on the license tab.
2. Enter the license key and click “Activate License”. An Internet connection is required.
*Click on “Activate Trial License” if you have not purchased a valid license key.
3. Click OK when the update is completed.

10
*Click “All” to apply the recording settings to the entire schedule.
3. Click to turn on recording.
4. Configure the camera’s schedule settings for quality, FPS and recording type.
5. Click and drag the mouse over the recording schedule to apply the settings to multiple days and times.
2. Go to the recordings tab.