Digitus Smart View DC VS-814 User manual

VIDEO
SPLITTER
1 In 2 Out
(DC VS
-812)
1 In 4 Out
(DC VS
-814)
1 In 8 Out
(DC VS-818)
U
SER MANUAL
DC VS
-812 / DC VS-814 / DC VS-818
Read this manual thoroughly and follow the installation
and operation procedures carefull
y to prevent any
damage to the unit, and/or any of the devices connected
to it.
This package contains:
§
1 VS-812 or VS-814 or VS-818 Video Splitter
§
1 DC 9V Power Adapter
§
1 User Manual
If anything is damag
ed or missing, contact your dealer.
OVERVIEW
These video splitters are boosting devices that duplicate
the video signal from any analog monitor source to two
(DC VS-812); four ( DC VS-814); or eight (DC VS-818)
outputs. As such, they provide fast, flexible, solutions for
situations such as:
1) Broadcasting video information (news headlines, stock
prices, airline and train schedules, etc.), to the public.
2) Monitoring harsh work environments from safe location.
3) Classroom or company training facilities.
The DC VS-812, DC VS-814, and DC VS-818 go beyond
being merely duplicators, however, in that they also
enhance the video signals over long distance
broadcasting of up to 65m (213’).
In addition, units can be daisy chained to handle as many
monitors as the installation requires, making them
excellent solutions for public broadcast systems.
To achieve multiple high quality VGA, SVGA, or Multisync
video signals over long distances, these video splitters are
your best choice.
FEATURES
§Ultra High 250 MHz Bandwidth
§Enhances Video Signal for Distances up to 65 m (213’)
§Supports DDC, DDC2, DDC2B (Port 1 Only)
§Daisy Chainable
§All Metal Housing
§Small Form Factor
§Ideal for Public Broadcasting; Remote Monitoring;
Classroom and Training Facilities
Note:
1. If you connect a DDC type monitor to Video Out Port 1,
all other monitors must be able to support the highest
resolution that the DDC monitor can provide.
2. These products are designed for VGA, SVGA, and
Multisync monitors. They are not suitable for CGA, EGA,
or MONO type monitors that use digital video signals.
-1-
SPECIFICATIONS
Function Specification
Cable Distance
(Device to Monitor) 65 m (213’) max.
Signal Type VGA, SVGA, XGA, Multisync
Video Input
Connectors 1 x HDB-15 Male
Operating
Temperature 5 –40o C
Storage Temperature -20 –60o C
Humidity 0 –80% RH, Non-condensing
Housing Metal
Function DC VS-812 DC VS-814 DC VS-818
DC 9V Power
Consumption (Max.)
180mA 220mA 350mA
Video Output
Connectors
(HDB-15 Female) 248
Max. Resolution 1920 x 1440 60 Hz
Bandwidth (-3db) 250 MHz
Weight 420 g 455 g 680 g
Dimensions
(L x W x H) mm 130x75x42 200x75x42
VIDEO OUT PIN ASSIGNMENTS
No. Assignment No. Assignment
1Red video 9NC
2Green video 10 Ground
3Blue video 11 ID0
4ID2 12 ID1
5Ground 13 Horizontal Sync
6Analog Ground 14 Vertical Sync
7Analog Ground 15 ID3
8Analog Ground
-2-

FRONT VIEW
1. Power LED lights to indicate the unit is receiving power.
REAR VIEW
1. Power Jack
The cable from the Power Adapter plugs in here.
2. Video In Port
§If this is a First Stage unit, the cable from the PC’s
video port plugs in here.
§If this is a Daisy Chained unit, the cable from the
Video Out port of the higher stage unit plugs in
here.
3. Video Out Port
The cables to the monitors can plug in to any
available port.
1. If you connect a DDC type monitor to Video Out
Port all other monitors must be able to support the
highest resolution that the DDC monitor can
provide.
2. The Front and Rear Views in the diagrams are for
a VS-818. A VS-812 and VS-814 will have two
and four Video Out Port, respectively, instead of
the eight Video Out Port shown in the diagram.
-3-
INSTALLATION
1. SINGLE STAGE INSTALLATION
In a Single Stage installation no additional Video Splitters
are daisy chained down from the first unit. To set up a
single stage installation do the following:
1.Use a high density HDB-15 male/female video extender cable
to connect the PC’s video port to theVideo In port of the
Video Splitter.
2.Use high density HDB-15 male/female video extender cables
to connect theVideo Out ports of the Video Splitter to the
monitors.
3.Plug the power adapter into an AC source; plug the power
adapter cable into the Video Splitter’s Power Jack.
4. Power up the Video Splitter; power up the monitors; power up
the PC.
2. DAISY CHAINING
To provide video display for more monitors, additional
Video Splitters can be daisy chained. Use a high density
HDB-15 male/female video extender cable, to connect
any available Video Out port on the higher level Video
Splitter to the Video In port of the lower level Video
Splitter.
You can chain as many Video Splitters as there are ports
available, and all three models can be mixed on the same
chain. Theoretically, there is no limit to the number of
splitters that can be chained, but the quality will
deteriorate as you chain further and further away from the
video signal.
-4-
FCC Statement
This equipment can generate, use and radiate radio
frequency energy and, if not installed and used in
accordance with the instructions in this guide, may cause
interference to radio communications. This equipment has
been tested and found to comply with the limits for a
Class A computing device pursuant to Subpart J of Part
15 of the FCC rules, which are designed to provide
reasonable protection against radio interference when
operated in a commercial environment. Operation of this
equipment in a residential area is likely to cause
interference, in which case the user, at his own expense,
will be required to take whatever measures are necessary
to correct the interference.
CE Declaration of conformity
This equipment complies with the requirements relating to
electromagnetic compatibility, EN 55022 class A for ITE
and EN 50082-1. This meets the essential protection
requirements of the European Council Directive 89/336/
EEC on the approximation of the laws of the Member
States relating to electromagnetic compatibility.
Trademarks
All company, brand, and product names are trademarks
or registered trademarks of their respective companies.
-5-