Digitus DA-70841 User manual

USB 3.0 to HDMI Adapter
Manual
DA-70841 Rev. 2
Description
DIGITUS USB 3.0 to HDMI Adapter, resolution up to 1920x1080 @60Hz, extend and
mirror mode support
The DIGITUS USB 3.0 to HDMI Adapter extends your workspace with an additional
monitor, TV or projector via the USB interface. You can use two graphic adapter
simultaneously on the PC and add or remove a monitor without rebooting the system.
This adapter supports resolutions up to 1920x1080, video streaming up to 1080p. The
USB 3.0 to HDMI adapter impresses with its elegant black housing and without
additional installation of graphics cards. The power supply runs through an USB port,
so there’s no additional external power supply needed.
Feature
Compliant with USB3.0 Specification Revision 1.0
Compliant with Universal Serial Bus Device Class Definition for Audio/Video
Devices (USB A/V)
USB upstream port supporting SS/HS data rate (5Gbps/480Mbps)
Video output up to 1920x1080@60Hz in USB 3.0 application (Video output
800x600 in USB 2.0 application)
Supports USB Plug and Play (PNP)
WHCK/WHQL certified driver support for Windows 7, 8 and 10
Support Windows Aero Effects

Package content
1. USB3.0 Graphic adapter
2. Quick Installation Guide
System Requirement
Intel i3 2.5GHz or Higher
4GB DDR3 SDRAM
Operating System: Windows 7 and above
Installation
1. Connect DA-70841 USB port to computer
2. New USB flash driver will be found
3. Install the driver (.exe file) and reboot the computer.
4. Connect HDMI connector to monitor
PS: If there is new OS version released, please go to website
http://www.business.assmann.com/and download new driver.
Connection Diagram
OUT
IN
HDMI Cable
LCD
Monitor
1080P TV
NB
PC

Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the
shipping content. If the Declaration of Conformity is missing, you can request it by post under the
below mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany