Digitus DS-46304 User manual

4K HDMI Splitter, 1x2
Quick Installation Guide
DS-46304

INTRODUCTION:
This high performance HDMI splitter provides one HDMI into two HDMI
outputs and supports 4K2K, Full 3D, 12-bit Deep Color as well as High
Definition Lossless Audio. With its 3Gbps bandwidth and the additional
features of the latest HDMI standards you can be sure of great HDMI
distribution.
APPLICATIONS:
Simultaneously display one HDMI source on two TVs/projectors
Showroom display
University lecture hall display
Retail sales display
Commercial presentation switcher/scaler
FEATURES:
Integrated HDCP decryption/encryption engines which are compliant with
HDCP Rev 1.3 specification
Wide Frequency Range: 25MHz - 340MHz
Supports HDTV resolutions up to 4K2K
Supports 1080p@60Hz, Deep Color 12-bit
Supports LPCM 7.1CH, and DTS-HD Master Audio
Supports Full 3D
PACKAGE CONTENTS:
4K HDMI Splitter
5 V/1A DC Power Supply Adaptor
4 x Rubber Foot
Quick Installation Guide
SYSTEM REQUIREMENTS:
HDMI equipped source devices such as a DVD/Blu-ray play with
HDMI cables or DVI to HDMI cables
HDMI equipped displays (TVs or monitors) with HDMI cables

PANEL DESCRIPTIONS:
HDMI OUTPUT: Connect each of the output ports to the HDMI display for
simultaneous HDMI distribution
LINK LEDs: These LEDs will illuminate when the HDMI outputs are
connected to the display with signal display on screen
HDMI INPUT: Connect the input port to the HDMI or DVI output of your
source equipment such as DVD player or set-top box
INPUT LED: The input led will illuminate when connect to a HDMI source
POWER LED: The power LED will illuminate when the unit is powered
5 V/1A DC: Connect the 5 V/1A DC power supply into the splitter and
Plug the adaptor to AC wall outlet
CONNECTION DIAGRAM:

OPERATION:
1. Connect the HDMI cable from the HD source to the input port of this HDMI
Splitter.
2. Connect the HDMI cables from your displays (monitor or projector) to the
outputs of this Splitter.
3. Plug the 5VDC power supply into this HDMI Splitter.
4. Turn on the power then the HDTV signal will be distributed to each HDTV
display.
SPECIFICATIONS:
a. Note: When displaying a 3D signal with a higher bandwidth than 225MHz
or a 4K2K resolution source, a High Speed HDMI cable is required.
Note:
External power supply unit, Manufacturer: Dongguan MLF Tech. Co., Ltd.;
Model name: MLF-A00060501000FE0021;
Rating, Input: 100-240 V~, 50/60 Hz, 0,18 A Max; Output: 5,0 V , 1 A;
A. The apparatus shall not be exposed to dripping or splashing
and that no objects filled with liquids, such as vases, shall be
placed on the apparatus. B. The MAINS plug is used as the disconnect
device, the disconnect device shall remain readily operable.