Digitus DS-43302 User manual

HDMI Splitter, 8-port
Manual
DS-43302
1.0 Introduction
This splitter is beautiful in appearance. It distributes the input of the HDMI
signal into eight identical outputs simultaneously. It supports HDCP and
complied HDMI 1.3b. Its video bandwidth can be up to 2.25Gpbs/225MHz.
This HDMI Splitter offers solutions for HDTV retail and show site, HDTV, STB,
DVD and Projector factory, noise, space and security concerns, data center
control, information distribution, conference room presentation, school and
corporate training environments

2.0 Features
Cascaded: Large distribution achieved by cascading the HDMI Amplifier
Splitter
Support highest video resolution 1080p
High performance up to 2.25Gbps
Support uncompressed audio such as LPCM
Support compressed audio such as DTS Digital, Dolby Digital (including
DTS-HD and Dolby True HD)
Support 3D
3.0 Specifications
Signal Input HDMI Signal
Input Video Signal 0.5-1.0 volts p-p
Input DDC Signal 5 volts p-p(TTL)
Maximum single link range 1920x1080,1080p
HDCP Support 1.2
DTV/HDTV 480i/576i/480p/576p/720p/1080i/1080
p
HDMI compliance HDMI 1.3b
Video Amplifier Bandwidth 2.25Gbps/225MHz
Vertical Frequency Range 50/60Hz
Interlaced Resolutions(50&60Hz) 480i,576i,1080i
Progressive Resolutions(50&60Hz) 480p,576p,720p,1080p
Operating Temperature 0℃to 70℃
Storage Humidity 5% to 90% RH (no condensation)
Power Supply DC 5V 3A
Power consumption(MAX) 10 W
Converter Unit Cert CE,FCC
Power Supply Cert CE,FCC
Note: Specification is subject to change without notice.

4.0 Package Contents
1) Main Unit
2) 5V DC Power Supply
3) User Manual
5.0 Panel Descriptions
6.0 Connection and Operation
1) Connect the HDMI input source and output devices into the HDMI
Amplifier Splitter.
2) Insert the DC side of 5v power supply into it and then connect the AC side
of the power supply into the wall outlet.
3) Turn on the power.
Attention: Insert / Extract cable gently.

6.1 Connection Diagram
Hereby ASSMANN Electronic GmbH, declares that this device is in compliance with the
requirements of Directive 2014/30/EU (EMC), Directive 2014/35/EU (LVD) and the Directive
2011/65/EU for RoHS compliance. The complete declaration of conformity can be requested
by post under the below mentioned manufacturer address.
Note:
If wrongly installed or improperly used in the living area, the device can cause interference in
radios and other electronic devices. Appropriate use is when the device, as far as feasible, is
operated with shielded connection cables (with network products in addition to category 5
shielded cables and higher). The device has been tested and falls within the limits of class A
computing equipment according to the requirements of EN 55022.
Warning:
This device conforms with test category A - it can cause radio interference in the living area; in
this case the operator may demand that appropriate measures are implemented and arise for
this reason. Declaration of conformity: The device fulfills the EMV requirements according to
EN 55022 for ITE and EN 55024 class A. Devices with external or integrated power supply
furthermore fulfill the requirements of EN 61000-3-2 and EN 61000-3-3. In this way, the
fundamental protection requirements of the EMV-2014/30/EU guideline are fulfilled.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany