Digitus DN-95131 User manual

GIGABIT ACTIVE
802.3af PoE MIDSPAN
Quick Installation Guide
DN-95131

2
Introduction
DN-95131 is an indoor rated active PoE midspan
Injector specially designed for complex backhaul
and networking applications. It provides 48Vdc,
0.32A power for remote PDs over 2 pairs output.
It supports both 10/100 Base-T and Gigabit
device. It works for 15.4W PoE PDs, such as
wireless APs, Wifi routers, Network cameras,
IP Phones, Microwave Radio and other power
Ethernet terminals. It fully complies to
IEEE802.3af PoE standard. Enclosed in an IP40 fire
retardant plastic case. It works with a wide input
voltage of 100-240 VAC, 50 or 60 Hz. It has
detection chip inside, which will detect and
classify PD before powering it. It will not provide
power until a standard-compliant PD is detected.

3
Main Features
•Provides 48Vdc, 0.32A power for remote PDs
over 2 pairs output
•Supports both 10/100 Base-T and
Gigabit device
•Works with a wide input voltage of
100-240 VAC, 50 or 60 Hz
•Easily merge of power and data cables into a
single cable
•Each output port has output current limited,
short-circuit protection, complete Powered
Device (PD) detection and classification
•The Injector can be used independent of
operating system
Package Contents
•DN-95131 PoE Injector
•Power Cord x 1
•Quick Installation Guide x1

4
Technical Data
•IEEE802.3 10Base-T Ethernet
•IEEE802.3u 100Base-Tx Fast Ethernet
•IEEE802.3ab 1000Base-T Gigabit Ethernet
•Full compliant with IEEE802.3af PoE standard
•Input :100-240Vac 0.5A 50/60Hz
•Output: 48Vdc 320mA
•Power Pins: 4/5(+), 7/8(-)
•Data Speed: 10/100/1000Mbps
•Operating Temperature: 0°C to 40°C
•Operating Humidity: 20% to 80%,
non-condensation
•Storage Temperature: -20°C to 70°C
•Storage Humidity: 10% to 90%,
non-condensation
•Operating Altitude: up to 2000 meters
•Case: Plastic
•Color: White
•IP Rated: IP40
•Size: 85mm x 30mm x 46mm
•Weight: 100g
•Power Indicator: Green
•PoE Load Indicator: Yellow

5
Product Description
1.
LAN: Data Input Port
4.
Power Indicator
2.
PoE Load Indicator
5.
AC Power Input
3.
PoE: Data & Power
Output Port

6
Connection Diagram
1.
Wireless AP
a.
Data and power cable
2.
IPC
b.
100-240Vac power cable
3.
100-240Vac Power
c.
Data cable
4.
Switch
5.
DN-95131

7
Hereby Assmann Electronic GmbH, declares that
the Declaration of Conformity is part of the
shipping content. If the Declaration of Conformity
is missing, you can request it by post under the
below mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany