Digitus DA-10287 User manual

SUPER BASS
PORTABLE BLUETOOTH
SPEAKER
Manual
DA-10287

Thank you for purchasing DIGITUS DA-10287 Super Bass Portable
Bluetooth Speaker! This instruction manual will get you started and
help you make the most out of your Bluetooth Speaker.
Note: When you turn your speaker on for the first time, you will need to
reset it. Because the speaker has an auto re-connect function, it will try to
automatically connect to the last device it was synched to. Please press the
play/pause button for 4 seconds to restart the speaker, and then connect to
your device.
What’s Included:
•Portable Bluetooth Speaker
•3.5mm connection cable
•Mini USB charging cable
General Specifications
•Bluetooth v2.1 includes profiles: A2DP
•Ultra-compact, high performance Bluetooth speaker delivers best-in-class
wireless stereo sound.
•Built-in mic with advanced noise cancellation enables clear wireless hands-free
calling and conferencing.
•Rechargeable Lithium Ion batteries power up to 3 hours of play time at full volume
on a single charge.
•Connects to iPod or any device with a 3.5 mm headphone port using a mini-jack
cable
•Range up to 33FT (10M)

Features and Benefits
•Bluetooth 2.1 with audio and digital signal processing for clean, best-in-class
wireless stereo sound
•One 40 mm full range drivers deliver superb music fidelity
•Convenient charging with included mini USB charging cable
•Rechargeable Lithium Ion battery for up to 7 hours of play time
•Connects to iPod or any device with a 3.5 mm headphone port using a mini-jack
cable
•Auto-search and auto-reconnect with compatible device
Compatibility
Wireless: Devices with Bluetooth 2.0 or above (See General Specifications
for profiles), such as iPad, iPhone (2nd Gen and newer with iPhone software
3.1), iPod touch (2nd Gen and newer with iPhone software 3.1) and Bluetooth
equipped Macs and most Bluetooth equipped smartphones or computers.
Wired: Devices with a standard 3.5 mm headphone output port such as iPod via 3.5 mm
mini-jack cable
WARNING
1. Do not become distracted by this product while driving.
2. Do not leave the product exposed to a heat source or high temperatures.
3. Do not remove or attempt to remove the non-user-replaceable battery.
When disposing of the product, take it to a waste electronics service.
4. Please remember that a loose object in a moving vehicle could become
a deadly projectile in the event of a collision.

micro

1. Power ON/OFF
This can be found at the side of the speaker.
2. Recharging Battery
This cable is provided in the package to allow charging of the Lithium-ion battery which
resides in the speaker. With this cable, you can charge the speaker from any USB port
found on laptops, PCs or USB adapter that connects to the electrical wall socket (USB
adapter is not supplied in package).
3. Line in
3.5 mm Audio Input Socket, allows connection to all PCs, laptops, walkman, Discman,
MP3 players, iPods’/iPhones/iPads, Smartphones and phones with similar audio socket.
please use the 3.5mm to 3.5mm cable supplied in package for connection
4. Operation of Key Buttons
+For increasing the volume of the speaker.
-For reducing the volume of the speaker.
>II This button is to Pause / Play the music, answer the telephone and re-start the
Bluetooth
5. Battery Performance/ Indicator
•When charging, light indicator will turn red
•When fully charged, light indicator will turn green
•When there is no more battery, speaker will be switched off automatically
•Light indicator will be in constant blue whenever music is played from external
source

6. Bluetooth/Line in performance /Indicator
•When open the speaker, the light indicator will turn blue
•When speaker in pairing mode, the light indicator will turn flash blue
•Re-start the speaker, it will re-connect last device, you will hear ”beep…” in two
times, one time is researching the device, second time is pairing the device
automatically.
•When plug 3.5mm jack cable, the light indicator will turn green
Set-up and Pairing via Bluetooth For Music Playback
The following instructions apply for a mobile phone but the procedure is the same
for a music player, except that you may not need to give the Bluetooth passcode.
1. Push the power key to “on”, you will hear ”beep..….” Sound.
2. Ensure that the speaker and the phone is on, press the play/pause buttons in 4
seconds to re-start the Bluetooth to connect to your device in first time using.
3. The Bluetooth speaker will reconnect in 30 seconds when restart after power off, it’s
forbidden to operate this time.
4. Activate the Bluetooth function on the phone, and set it to search for the phone, and
set it to search for Bluetooth devices.
5. Select the Bluetooth speakers”DA-10287” from the list of found device.
6. Enter the Bluetooth passcode 0000 to pair and connect the speaker to the phone. In
some phones you may need to make the connection separately after pairing.
If the pairing is successful and the speaker is in a Bluetooth connection with the music
device, the blue indicator light flashes about every 2 seconds, and you will
hear ”beep..…”sound

Reconnection in Event of Bluetooth Disconnection
If by any reason your device and the Speaker are disconnected, such as out of connection
distance or powering off, the Speaker will “auto-connect” with compatible devices that
auto-search and re-connect with their last connecting device, the reconnection time is 30
seconds, please don’t operate the speaker at that time.
If want to disconnect the Bluetooth speaker after succeed in paring, can long press
pause/play button.
Controlling Playback When Connected Via Bluetooth:
Volume: Using the volume controls on the side of the Speaker, press the (+) button to
increase volume and the (-) button to decrease volume.
Pause music: press the pause/play button to pause playback when the Bluetooth
connection. Press again to resume music.
Connecting to a Device Via 3.5 mm “LINE IN” Input
You can use DA-10287 Bluetooth Speaker for music playback with any device which has a
3.5 mm headphone port. Simply plug one end of the cable into your device, as you would
a pair of headphones. Plug the other end of the cable into the 3.5 mm port marked “LINE
IN” on the front of AONI-611BT Bluetooth Speaker, then Play music.
When Connected Via 3.5 mm “LINE IN” Input:
Note: Pause cannot be controlled with the pause/play control on DA-10287 Bluetooth
Speaker when connected via the 3.5 mm “LINE IN” input, the GRENN LED light will be
normally on. Use the pause control on your device as you normally would.
Recharging Battery
Plug the Mini USB end of the included USB cable into the mini USB port. Plug the other
end into a USB port on your computer or other devices made for USB charging. The LED
light will begin to RED . It will be GREEN at full charged. Charging time is 4 hours from an
empty battery, it’s better to charge 12 hours at the first three times.