Digitus DN-16027 User manual

DIGITUS Plug&View
OptiVision / OptiArc / OptiMax
Quick Installation Guide
DN-16027 / DN-16036 / DN-16037 / DN-16040
DN-16036
DN-16037 / DN-16040
DN-16027

Introduction:
DIGITUS offers P2P Cloud service to avoid those complicated network
setting for camera installation. All you need is just “Plug & View” with the
following 3 simple steps completed within 1 minute.
Installation Procedures:
1. Power on the camera and connect
the Ethernet cable from the camera
to the router. (Figure 1). Please wait
20 seconds for the camera to start
up.
2. Download “DIGITUS Plug&View” APP from
APP store or Google Play and execute this
APP from your mobile devices and login
the account and password (Figure 2).
Alternatively, you can also access the
cameras via browsers from your
Computer/Notebook by accessing:
http://login.mydigitus.net/
Note: If you don’t have Google account, please create account and
password first.
3. Add cameras under your account by scanning the QR code on the
last page of this QIG using “DIGITUS Plug&View” APP from your
mobile devices.
Alternatively, if using browser, you can key in the MAC address and
Activation code manually as well.
After adding the camera, now you can have live-view anytime anywhere.
Figure 1
Figure 2

Installation Procedures (Wireless)
Wireless (WiFi) connection between IP cameras and Wireless router /
Access point is also available with the following procedures.
4. After completing Step 1 ~ 3 for wired connection with Ethernet cable,
login into http://login.mydigitus.net/, and click the setting icon to
enter camera user interface.
At the Web User Interface of the cameras, please key in “admin” for
the account and “admin” for the password to log in.

5. Go to “Parameter” => “Network”. Please select “WiFi” button and
the SSID list of the available Wireless router or Access points will
pop-up on the screen.
6. Please select the SSID that you want to connect to and key in the
password if it is encrypted. Please press “OK” to apply the changes.
After WiFi is connected, close this camera user interface window and
unplug the Ethernet cable from the IP camera. Now you can access the
camera wirelessly via Plug&View APP or through
http://login.mydigitus.net by browser.