Digitus Plug&View OptiView DN-16028 User manual

DIGITUS Plug&View
OptiView
Quick Installation Guide
DN-16028

Introduction:
DIGITUS offers P2P Cloud service to avoid those complicated network
setting for camera installation. All you need is just “Plug & View” with the
following 3 simple steps completed within 1 minute.
Installation Procedures:
1. Power on the camera and connect
the Ethernet cable from the camera
to the router. (Figure 1) Please wait
20 seconds for the camera to start
up.
2. Download “DIGITUS Plug&View”
APP from APP store or Google Play
and execute this APP from your
mobile devices and login the account
and password (Figure 2).
Alternatively, you can also access
the cameras via browsers from your
Computer/Notebook by accessing:
http://www.mydigitus.net/
Note: If you don’t have Google account, please create account and
password first.
3. Add cameras under your account by scanning the QR code on the
last page of this QIG using “DIGITUS Plug&View” APP from your
mobile devices.
Alternatively, if using browser, you can key in the MAC address and
Activation code manually as well.
After adding the camera, now you can have live-view anytime anywhere.
Figure 1
Figure 2

Installation Procedures (Wireless)
Wireless (WiFi) connection between IP camera and Wireless router /
Access point is also available with the following procedures.
4. After completing Step 1 ~ 3 for wired connection with Ethernet cable,
login into http://www.mydigitus.net/, and click the setting icon to
get into camera user interface.
Then you will enter the Web User Interface of the cameras. Please
select livestream mode to enter. Please key in “admin” for the
account and “admin” for the password to log in.

5. Press “Tool bar” to enter the configuration page.
6. Go to “Wireless Lan Settings” and select the wireless router / access
point to connect to. Then enable “Using Wireless Lan” and key in the
password. Press “Submit” to take effect of the new WiFi setting and
close this camera user interface window.
Then unplug the Ethernet cable. Now you can access the camera
wirelessly via Plug&View APP or through http://mydigitus.net