Digitus DS-43110 User manual

8-PORT HDMI
VIDEO SPLITTER
User Manual
DS-43110

２
Table of Contents
1.0 Introduction ....................................................................................2
2.0 Specifications.................................................................................2
3.0 Package Contents..........................................................................3
4.0 Panel Descriptions.........................................................................4
5.0 Connection and Operation............................................................4

３
HDMI 8Ports Splitter Amplifier by Cat5 x1
Dear Customer
Thank you for purchasing this product. For optimum performance and safety, please read these
instructions carefully before connecting, operating or adjusting this product. Please keep this manual
for future reference.
1.0 Introduction
This HDMI Splitter is an HDMI splitter with eight RJ45 outputs. It distributes the input of the HDMI
signal into the eight identical outputs simultaneously. Eight HDMI Extender Receivers by Cat5 x1
receive the distributed signal from the splitter and transmit to displays individually.
Each receiver works with the splitter as a full functional module. Only by the most inexpensive UTP
cable with cross stand inside the full functional module extend the HDTV display up to 50 meters for
1080p.
This HDMI Splitter offers solutions for HDTV retail and show site, HDTV, STB, DVD and Projector
factory, noise, space and security concerns, data center control, information distribution, conference
room presentation, school and corporate training environments.
1.1 Features
This HDMI Splitter has many features that enable it to perform in a superior manner.
Among those features you will find:
Easy to Use: Install in seconds, no need of setting.
One pair as a full functional module,
One piece of CAT-5e/6 cable can substitute HDMI cable to achieve long distance transmission.
Follow the standard of IEEE-568B.
Transmission distance can be up to 50 meters for 1080p using
UTP cable with cross stand inside.
Supports highest video resolution 1080p.
Supports 165MHz/1.65Gbps per channel (4.95Gbps all channel) bandwidth.
Supports 8bit per channel (24bit all channel) deep color.
Supports uncompressed audio such as LPCM

４
2.0 SPECIFICATIONS
Signal Inputs/Output
Input DDC Signal 5 volts p-p (TTL)
Maximum Single Link Range 1920X1080p
Output Video HDMI
Operating Frequency
Video Amplifier Bandwidth 1.65Gpbs/165MHz
Vertical Frequency Range 50/60Hz
Resolutions(HDTV)
Interlaced(50&60Hz) 480i,576i,1080i
Progressive(50&60Hz) 480p,576p,720p,1080p
Mechanical
Size of HDMI 8Ports Splitter Amplifier (L-W-H) 441×202×45mm
Weight of HDMI 8Ports Splitter Amplifier (Net) 2218g
Size of Receiver (L-W-H) 100×65×25.5MM
Weight of Receiver (Net) 385G
Warranty
Limited Warranty 1 Year Parts and Labor
Environmental
Operating Temperature 0°C to +70°C
Operating Humidity 10% to 85 % RH (no condensation)
Storage Temperature -10°C to +80°C
Storage Humidity 5% to 90 % RH (no condensation)
Power Requirement
Power Supply for HDMI 8Ports Splitter Amplifier 5V DC@4A，15W
Power Supply for Receiver 5V DC@2A，5W
Regulatory Approvals
Converter Unit FCC,CE,UL
Power Supply UL,CE,FCC
Accessories Adapter
AC Power Adapter US standard, UK standard and so on
User Manual English Version
Note: Specifications are subject to change without notice.
3.0 Package Contents
Before attempting to use this unit, please check the packaging and make sure the following items
are contained in the shipping carton:
Packaging of Main Unit
1) HDMI 8Ports Splitter Amplifier
2) User’s Manual.
Packaging of Accessories
3) Eight Receivers
4) Nine pieces of 5V DC Power Supply.
（one 5V@4A，eight 5V@2A）

4.0 Panel Descriptions
5.0 ConnectION and OperatION
1) Connect the single HDMI source (such as HD-DVD, PS3, STB ) to the main HDMI input
using a piece of HDMI cable.
2) Connect each piece of CAT-5e/6 cable to both of the output of the HDMI 8-Ports Splitter
Amplifier and input of the Receiver.
3) Connect outputs of Receivers to displays ( such as HD-LCD, HD-DLP)
4) Plug the 5V@ 4A power supply into the HDMI 8Ports Splitter Amplifier and the
5V@2A power suppliers to each Receiver individually.
Attention: Insert / Extract cable gently.

６
5.1 CONNECTION DIAGRAM