Dimensions Furniture 1005 User manual

D
#1005 CHAIR
Assembly Instructions
imen
s
ion
s
Furniture
Thank you for purchasing our fine product!
This package contains all tools necessary for assembly.
Give us a chance to make it right.
Do not return this item to the store. Contact our friendly customer
service department with any problems or comments. Replacements
for missing or damaged parts are normally shipped the same day!
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET. After business hours, leave a message.
Wewill return your call the next business day.
#1005 CHAIR
WARNING: Failure to follow these directions and warnings can result in serious injury
and/or product damage.
! Assistanceis required toassemble this chair.
! Never stand on the chair or use it as a ladder.
! Do not tip the chair when seated.
! Periodically re-tighten all boltsand legs.
! Do not exceed 250 lbs. (113.4kg) weight limit on the chair.
! If any parts become missing,damaged or worn, discontinue use until theyare replaced with identical parts.
! Always seek assistance befor moving furniture.
Page 1

D
#1005 CHAIR
Assembly Instructions
imen
s
ion
s
Furniture
PARTS LIST
Part
Drawing
Part Name
Qty.
Part
Drawing
Part Name
Qty.
A
CHAIR
BACK
1 E
SEAT
CUSHION
1
B
CHAIR
SEAT
1 F
SHORT BOLT
W/ WASHERS
6
C
FRONT
LEG
2 G
LONG BOLT
W/ WASHERS
8
D
BACK
LEG
2 H
ALLEN
WRENCH
1
Step 1 -Remove all parts from their packaging and confirm that the quantities matchthose listed
above. If any parts are damaged or missing, please call our Customer Service Department at 1-866-
528-8364.
Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday -Friday,8am-5pm, ET. Page 2

D
#1005 CHAIR
Assembly Instructions
imen
s
ion
s
Furniture
Step 2 - Lay the Chair Back (PartA) on a large flat surface, suchas a carpeted floor. After pulling back
the dust cover from the bottom of the Chair Seat (Part B),Align the bolt holes in the back of the
Chair Seat with the bolt holes in the bottom-front of the Chair Back.
Step 3 - Hand thread the six Short Bolts with Washers (PartF) clockwise through the Chair Seat and
into the Chair Back. Use the Allen Wrench(Part H) to fully tighten the six bolts. Do not over
tighten.
B
A
F
Step 4 - With the dust cover still pulled back, align the bolt holes in the Front Legs (Part C) with the bolt
holes in the front of the Chair Seat (Part B) and the bolt holes in the Back Legs (Part D) with the
bolt holes in the back of the Chair Seat.
Step 5 - Hand thread two Large Bolts with Washers (Part G) clockwise through each leg and into the
Chair Seat. Use the Allen Wrench(Part H) to fully tighten the eight bolts. Do not over tighten.
C
G
B
A
D
Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday -Friday,8am-5pm, ET. Page 3

D
#1005 CHAIR
Assembly Instructions
imen
s
ion
s
Furniture
Step 6 -Re-attach the portions of the dust cover that were pulled back during Chair assembly.
Step 7 - With help, set the Chair upright and place the Seat Cushion (Part E) onto the the Chair Seat
(Part B). Assembly is now complete and the Chair is ready for regular use.
Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday -Friday,8am-5pm, ET. Page 4