Dimensions Furniture 130 User manual

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Do not return this item to the store. Contact our friendly customer
service department with any . Replacements
for missing or damaged parts are normally shipped the same day!
Monday - Friday, 8am-5pm, ET. After business hours, leave a message.
We will return your call the next business day.
problems or comments
Thank you for purchasing our fine product!
This package contains all tools necessary for assembly.
#130 Chair
Page 1
#130 Chair
Assembly Instructions
WARNING: Failure to follow these directions and warnings can result in serious injury
and/or product damage.
!
!
!
!
!
!
!
Assistance is required to assemble this chair.
Never stand on the chair or use it as a ladder.
Do not tip the chair when seated.
Periodically re-tighten all bolts.
Do not exceed 250 lbs. (113.4 kg) weight limit on the chair.
If any parts become missing, damaged or worn, discontinue use until they are replaced with
identical parts.
Always seek assistance before moving furniture.

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 2
#130 Chair
Assembly Instructions
Part
Drawing
Part Name Qty. Part
Drawing
Part Name Qty.
Step 1 - Remove all parts from their packaging and confirm that the quantities match those listed
above. If any parts are damaged or missing, please call our Customer Service Department at 1-866-
528-8364. PARTS MAY BE STORED UNDER THE REMOVABLE DUST COVER OF THE CHAIR
SEAT.
PARTS LIST
AB
CD
E
F
11
12
CHAIR
BACK
CHAIR
SEAT
SEAT
CUSHION LEG
BOLT WITH
WASHERS
ALLEN
WRENCH 1
9
B - Chair Seat
Chair Back - A
Bolt W/
Washers - F
Step 2 - With help, lay the Chair Back (Part A) on a
soft, flat surface, such as a carpeted floor.
Step 3 - With help, align the bolt holes in the back
of the Chair Seat (Part B) with the bolt holes in the
front of the Chair Back. The Velcro® attached
Dust Cover (Part E) may need to be removed from
the bottom of the Chair Seat.
Step 4 - Hand thread one Bolt with Washers (Part
F) clockwise through each of the five bolt holes in
the back of the Chair Seat and into the Chair Back.
Step 5 - Fully tighten the bolts with the Allen
Wrench (Part G). Do not over tighten the bolts.
Do not fully tighten the Bolts.
G
1
DUST
COVER

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 3
#130 Chair
Assembly Instructions
Step 6 - Align the bolt holes in a Leg (Part D) with the bolt holes in a leg notch in the front of the Chair
Seat.
Step 7 - Hand thread two Bolts with Washers clockwise through a Leg and into a leg notch in the
front of the Chair Seat.
Fully tighten the bolts with the Allen Wrench.Step 8 -
Repeat Steps 6 through 8 to install the second Leg.
Do not over tighten the bolts.
D - Leg
Step 9 - Apply the Velcro® attached Dust Cover (Part E) to the bottom of the Chair Seat.
Step 10 - With help, set the chair upright onto its legs.
Dust Cover - E

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 4
#130 Chair
Assembly Instructions
Step 11 - Set the Seat Cushion (Part C) onto the Chair Seat.
C - Seat Cushion
Congratulations, assembly is complete!