Dimensions Furniture 150 Rocker User manual

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Do not return this item to the store. Contact our friendly customer
service department with any . Replacements
for missing or damaged parts are normally shipped the same day!
Monday - Friday, 8am-5pm, ET. After business hours, leave a message.
We will return your call the next business day.
problems or comments
Thank you for purchasing our fine product!
This package contains all tools necessary for assembly.
#150 Rocker
Page 1
#150 Rocker
Assembly Instructions
WARNING: Failure to follow these directions and warnings can result in serious injury
and/or product damage.
!
!
!
!
!
!
!
Assistance is required to assemble this chair.
Never stand on the chair or use it as a ladder.
Do not tip the chair when seated.
Periodically re-tighten all bolts and legs.
Do not exceed 250 lbs. (113.4 kg) weight limit on the chair.
If any parts become missing, damaged or worn, discontinue use until they are replaced with
identical parts.
Always seek assistance before moving furniture.

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 2
#150 Rocker
Assembly Instructions
Part
Drawing
Part Name Qty. Part
Drawing
Part Name Qty.
Step 1 - Remove all parts from their packaging and confirm that the quantities match those listed
above. If any parts are damaged or missing, please call our Customer Service Department at 1-866-
528-8364. Some parts may be packed in the underside of the Seat Frame.
PARTS LIST
AB
11
11
22
28
1
CD
EF
GH
J
BACK
FRAME
RIGHT
ARM
FRONT
LEG ROCKER
SHORT BOLT
W/ WASHERS
LONG BOLT
W/ WASHERS
ALLEN
WRENCH
LEFT
ARM
SEAT
FRAME
WOOD
PLUG
3
I

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 3
#150 Rocker
Assembly Instructions
Step 2 - Set the Back Frame (Part A) back-side
down on a soft, flat surface such as a carpeted
floor.
Step 3 - With help, align the bolt holes in the back
of the Seat Frame (Part B) with the bolt holes in
the Back Frame.
Step 4 - Hand thread a Long Bolt with Washers
(Part H) clockwise through each of the corner
holes in the Seat Frame and into the Back Frame.
Do not fully tighten the two Bolts.
Step 5 - Hand thread a Short Bolt with Washers
(Part I) through the center bolt hole in the Seat
Frame and into the Back Frame. Do not fully
tighten the Bolt.
H - Long Bolt
I - Short Bolt
A - Back Frame
H - Long Bolt
with Washers
C - Right Arm D - Left Arm
Step 6 - Align the bolt holes in the Right Arm (Part C), with the bolt hole in the right side of the Seat
Frame and the bolt hole in the right side of the Back Frame.
Step 7- Hand thread a Long Bolt with Washers through the under-side of the Seat Frame and into the
Right Arm. Do not fully tighten the Bolt.
Repeat Steps 6 and 7 to install the Left Arm (Part D).

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 4
#150 Rocker
Assembly Instructions
Step 8 - Align the bolt hole in the Right Arm (Part C), with the bolt hole in the right side of the back
frame.
Step 9 - Hand thread a Short Bolt with Washers (Part I) through the Back Frame and into the Right
Arm. Fully tighten the Short Bolt with the Allen Wrench (Part J). Do not over tighten the Bolt.
Repeat Steps 8 and 9 to install the Left Arm.
Step 10 - Insert a wood plug into the bolt hole in
the back of the Back Frame.
Step 11 - Fully tighten all bolts inserted in Steps 4, 5,
and 7 with the Allen Wrench. Do not over tighten the Bolts.
G - Wood Plug
I - Short Bolt
D - Left Arm
A - Back Frame
E - Front Leg
Step 12 - Hand thread a Front Leg (Part E)
clockwise into each corner-front bolt holes in the
bottom of the Seat Frame. Do not over tighten the
Legs.

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 5
#150 Rocker
Assembly Instructions
Step 13 - Align the bolt holes in a Rocker (Part F) with the bolt hole in the right-side Front Leg and
Back Frame. The front bolt hole in the Rocker aligns to the Front Leg.
Step 14 - Hand thread a Long Bolt with Washers (Part H) clockwise through the front bolt hole in the
Rocker and into the Front Leg. Hand thread a Long Bolt with Washers though the rear bolt hole in the
Rocker and into the Back Frame.
Step 15 - Fully tighten both Long Bolts with the Allen Wrench (Part J). Do not over tighten the Bolts.
Repeat Steps 13, 14 and 15 to install the other Rocker.
With help, set the Rocking Chair upright for use.
Assembly is complete.
H - Long Bolt with Washers
F - Rocker
F - Rocker
A - Back Frame
Front
Rear of Rocker