Dimensions Furniture 1702 User manual

D
#1702 Bench
Assembly Instructions
imen
s
ion
s
Furniture
Thank you for purchasing our fine product!
This package contains all tools necessary for assembly.
Give us a chance to make it right.
Do not return this item to the store. Contact our friendly customer
service department with any problems or comments. Replacements
for missing or damaged parts are normally shipped the same day!
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET. After business hours, leave a message.
Wewill return your call the next business day.
#1702 Bench
WARNING: Failure to follow these directions and warnings can result in seriousinjury
and/or product damage.
! Assistanceis required toassemble this bench.
! Never stand on the bench or use it as a ladder.
! Do not tip the bench when seated.
! Periodically re-tighten all boltsand legs.
! Do not exceed 250 lbs. (113.4kg) weightlimit on the bench.
! If any parts become missing, damaged or worn, discontinue useuntil they are replaced with identicalparts.
! Always seek assistance before moving furniture.
Page 1

D
#1702 Bench
Assembly Instructions
imen
s
ion
s
Furniture
PARTS LIST
Part
Drawing
Part Name
Qty.
Part
Drawing
Part Name
Qty.
A Bench Seat 1
E Right Leg 2
B Left Arm 1
F
Bolts With
Washers
12
C Right Arm 1
G
Allen
Wrench
1
D Left Leg 2
Step 1 -Remove all parts from their packaging and confirm that the quantities matchthose listed
above. If any parts are damaged or missing, please call our Customer Service Department at 1-866-
528-8364.
Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday -Friday,8am-5pm, ET. Page 2

D
#1702 Bench
Assembly Instructions
imen
s
ion
s
Furniture
Step 2 - Place Bench Seat (PARTA) on its back on a flat surface and partially peel back the dust
cover. Align the holes in the Left and Right Arms (PARTB and C) with the corresponding
holes in the Bench Seat. Insert clockwise four Bolts With Washers (PARTF) through
the upper most holes accessed from the underside of the Bench Seat. Partially tighten Bolts
using the Allen Wrench(PART G).
F
F
Step 3 - Insert two Right Legs (PARTE) and two Left Legs (PART D) into the openings on the bottom
of the Left and Right Arms and align bolt holes. Insert clockwise the Bolts With Washers
(PARTF) through the Bench Seat and into the threaded inserts in the Legs. Tighten the
Bolts With Washers using the Allen Wrench(PART G). Before reattching the dust cover fully
tighten all Bolts taking care to not over tighten them.
F F F
F
F F
F
F
Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday -Friday,8am-5pm, ET. Page 3

D
#1702 Bench
Assembly Instructions
imen
s
ion
s
Furniture
Step 4 - With help, set the Bench upright. Bench assembly is now complete!
Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday -Friday,8am-5pm, ET. Page 4