Dimensions Furniture 628 User manual

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Do not return this item to the store. Contact our friendly customer
service department with any . Replacements
for missing or damaged parts are normally shipped the same day!
Monday - Friday, 8am-5pm, ET. After business hours, leave a message.
We will return your call the next business day.
problems or comments
Thank you for purchasing our fine product!
This package contains all tools necessary for assembly.
#628 CHAIR
Page 1
#628 Chair
Assembly Instructions
WARNING: Failure to follow these directions and warnings can result in serious injury
and/or product damage.
!
!
!
!
!
!
!
Assistance is required to assemble this chair.
Never stand on the chair or use it as a ladder.
Do not tip the chair when seated.
Periodically re-tighten all bolts and legs.
Do not exceed 250 lbs. (113.4 kg) weight limit on the chair.
If any parts become missing, damaged or worn, discontinue use until they are replaced with
identical parts.
Always seek assistance before moving furniture.

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 2
#628 Chair
Assembly Instructions
Part
Drawing
Part Name Qty. Part
Drawing
Part Name Qty.
Step 1 - Remove all parts from their packaging and confirm that the quantities match those listed
above. If any parts are damaged or missing, please call our Customer Service Department at 1-866-
528-8364. Some parts may be packed in the underside of the Seat Frame.
PARTS LIST
AB
11
11
11
1
6
1
1
4
CD
EF
GH
I
K
J
BACK
FRAME
RIGHT
ARM
SEAT
CUSHION
PILLOW
BACK
CUSHION
LEG
SHORT BOLT
W/ WASHERS
LONG BOLT
W/ WASHERS
ALLEN
WRENCH
LEFT
ARM
SEAT
FRAME
DUST
COVER
L
7

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 3
#628 Chair
Assembly Instructions
Step 2 - Lay the Back Frame (Part A) on a flat surface, such as a carpeted floor. Align the bolt holes
in the back of the Seat Frame (Part B) with the bolt holes in the bottom-front of the Chair Back.
Step 3 - Hand thread two Long Bolts with Washers (Part J) clockwise through the three bolt holes on
the Seat Frame and into the Back Frame. Do not fully tighten the Bolt .
Do not fully tighten the Bolt.
two s
Step 4 - Hand thread a Short Bolt with Washers (Part K) clockwise through the lower bolt hole in the
Seat Frame and into the Seat Back.
Seat Frame - B J - Long Bolt
with Washers
Back Frame - A
K - Short Bolt
with Washers

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 4
#628 Chair
Assembly Instructions
C - Right Arm
D - Left Arm
B - Seat Frame
J - Long Bolt with Washers
K - Short Bolt with Washers
Step 5 - Align the bolt holes in the Right Arm (Part C) with the bolt holes in the right side on the Seat
and Back Frame. Hand thread two Long Bolts with Washers (Part J) clockwise through the two upper
bolt holes in the Seat Frame into the Right Arm.
Step 6 - a Short K Lower
Repeat Steps 5 and 6 to install the Left Arm (Part D).
Do not fully tighten the Bolts.
Hand thread Bolt with Washers (Part ) clockwise through the bolt hole in the
Seat Frame into the Right Arm. Do not fully tighten the Bolt.

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 5
#628 Chair
Assembly Instructions
Step 7 - With help, set the #628 chair frame onto its bottom and lift the rear Velcro® attached cover
on the back to expose the frame.
Step 8 - Hand thread two Short Bolts with Washers (Part K) clockwise through the Back Frame and
into one Arm. the two Short Bolts with the Allen Wrench (Part L). Do not over tighten the
bolts.
Repeat Step 7 to install two Short Bolts with Washers in the other Arm.
Step 9 - Close the rear cover and with help, lay the chair frame on its back.
Fully tighten
Velcro® attached
Step 10 - all three Bolts in the Seat inserted in
(inserted in Step 5 and 6) with the Allen Wrench. Do not over tighten the bolts.
Fully tighten back ( Step 3 and 4) and the three bolts in
each arm
Fully Tighten all 9 Bolts
in the Seat Frame
K - Short Bolt with
Washers

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 6
#628 Chair
Assembly Instructions
Step 11 - Attach the Velcro® attached Dust Cover (Part H) to the bottom of the chair.
Step 12 - Screw a Leg (Part I) clockwise into each of the four holes in the bottom of the chair. Fully
tighten the legs but do not over tighten.
Dust Cover - H
Leg-I
Leg-I

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 7
#628 Chair
Assembly Instructions
Step 13 - Place the Seat Cushion (Part E) onto the Seat Frame so that the zipper faces the Back
Frame.
Step 14 - Place the Back Cushion (Part F) upright on the Seat Cushion so that the zipper faces
towards the Seat Cushion.
Seat Cushion - E
Back Frame - A
F - Back Cushion

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 8
#628 Chair
Assembly Instructions
Congratulations, assembly is complete.
G - Pillow
Step 15 - Place the Pillow (Part G) upright on the Seat Cushion so that the zipper on the Pillow faces
towards the Seat Cushion.