Dimensions Furniture MoDRN 8682B User manual

ASSEMBLY INSTRUCTIONS
Model: #8682B
MōDRN Retro Glam Marion Sleigh Base Buet
1/14
Lot Number: _________________
Date of Purchase: ___ / ___ / ____
Manufactured by: Dimensions Furniture, Inc
341 Gradle Drive, Carmel, IN 46032
1-866-528-8364 / [e-mail]
WARNING The maximum load capacity as listed above may not be exceeded and is assumed to be
distributed evenly. Exceeding load capacity may result in collapse and possible injury.
!
7
5
lbs
2
5
l
b
s
Maximum load
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Thank you for your purchase. We want to make sure it is to your complete satisfaction. Hardware is seperated individually for easy
identication. Please, identify and count all parts and hardware to make sure they match with the illustrations herein and are all
present.
Customer Service - 1-866-528-8364 / [email protected]
Your satisfaction is our top priority. Our products are designed and manufactured to meet the highest quality. In the event that
you have assembly questions, or parts are missing or damaged, please do not return the product.
Our customer service department would appreciate the opportunity to provide any help necessary regarding assembly and to
provide any necessary parts.
If any parts are missing or defective please contact our customer service department.

!
Assemble on a at and even surface.
Assembly should take place in the secure environment that is clean and dry.
Assembly can be done by one person, but two persons are recommended.
Allen wrench available for assembly.
Please check that all parts and hardware are included before beginning assembly.
Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or
hardware.
Please use CAUTION AND CARE WHEN LIFTING the product.
Never stand on the item or use it as a ladder.
Periodically re-tighten all exposed hardware.
If any parts become missing, damaged, or worn, discontinue use until they are replaced with identical parts.










CAUTION ! Please read below statements before beginning assembly.
PRE-ASSEMBLY PREPARATION:
2/14
HARDWARE LIST
1
2
20pcs
16pcs
3
4
8pcs
8pcs
5
6
Round-Head Screw
Hinge
24pcs
4pcs
7
8
Flat-Head Screw
Round-Head Bolt
24pcs
8pcs
9
10
Left Handle
Right Handle
1pc
1pc
11
12
Shelf Pin
Allen Wrench
12pcs
1pc
Wood Dowel
Long Bolt with Washers
(1/4” x 1-1/4”)
Medium Bolt
(1/4”x1”)
Short Bolt with Washers
(1/4”x5/8”)

3/14
PRE-ASSEMBLY PREPARATION:
PARTS LIST
AB
C
Top Panel 1 pc Left Side Frame 1 pc
Right Side Frame 1 pc
D
Left Side Panel 1 pc
EF
G
Right Side Panel 1 pc Left Divider 1 pc
Right Divider 1 pc
H
Bottom Panel 1 pc
IJ
K
Center Leg 2 pcs Back Panel 1 pc
Left Door Panel 1 pc
L
Right Door Panel 1 pc
M
Shelf Panel 2 pc
N
Center Shelf Panel 1 pc

STEP-BY-STEP ASSEMBLY
Step 1 - Lay the Top Panel on a at surface. Insert eight Wood Dowels into each hole as shown below.
4/14
x8
Wood Dowel
1
A1
1
A

STEP-BY-STEP ASSEMBLY
5/14
Step 2 - Place the Left and Right Side Panels and Left and Right Dividers over the Wood Dowels of the Top Panel .
Attach the side panels and dividers using eight Long Bolt with Washers . Next, place eight Wood Dowels into the
edge of the side panels and dividers, as shown below.
D E F G 1 A
2
x8
Long Bolt
with Washers
x1
Allen Wrench
2
12
2
E
G
F
D
A
1
x8
Wood Dowel
1
1
2

STEP-BY-STEP ASSEMBLY
6/14
Step 3 - Place Bottom Panel over the Wood Dowels of the side frames and dividers. Attach the Bottom Panel using eight
Bolt with Lock Washer .
x1
Allen Wrench
2
12
H
2
H 1 H
3
x8
Long Bolt
with Washers
2

STEP-BY-STEP ASSEMBLY
7/14
Step 4 - Insert two Wood Dowels into the locations shown on each Left and Right Side Frames .
Attach the Left Side Frame and Right SIde Frame using eight Long Bolt with Lock Washer .
x8
Long Bolt with
Lock Washer
x1
Allen Wrench
3
x4
Wood Dowel
1
12
B
3
C
1
H
B C 3
B C
1
3

STEP-BY-STEP ASSEMBLY
8/14
Step 5 - Attach the two Center Legs to the Bottom Panel and side frames using eight Short Bolts with Washers , as shown.
x8
Short Bolt
with Washers
x1
Allen Wrench
4
12
I H
I
4
H
4

STEP-BY-STEP ASSEMBLY
9/14
Step 6 - With help, Lay assembly onto it’s front side. Attach the Back Panel into the grooves, using twenty-six Round-Head
Screws in the locations shown below.
x24
Round-Head
Screw
5
J
5
5
J
5

STEP-BY-STEP ASSEMBLY
10/14
Step 7 - Lay the Left and Right Doors Panels on a at clean surface. Attach each of the four Hinges in the locations shown,
using eight Flat-Head Screws .
x8
Flat-Head Screw
7
x4
Hinges
6
K
7
6L
6
7
KL

STEP-BY-STEP ASSEMBLY
11/14
Step 8 - Attach the Left and Right Door Panels with Hinges using sixteen Flat-Head Screws . Next, Attach the Left Handle
to the Left Door Panel and Right Handle to the Right Door Panel using eight Round-Head Bolt .
Left Handle
x1
Right Handle
9
10
Adjust this screw to balance the
spacing of the doors.
9
10
7
8
x8
Flat-Head Screw
x1
Round-Head Bolt
7
8
x16
K
L
K L 7 9
K10 L8

STEP-BY-STEP ASSEMBLY
12/14
Step 9 - Insert eight Shelf Pins at the desired height for each Shelf Panel . Place each Shelf Panel onto the Shelf Pins .
x8
Shelf Pins
11
11 M M 11
M
M
11

STEP-BY-STEP ASSEMBLY
13/14
Place four Shelf Pins at the desired level. Place Center Shelf Panel onto the shelf pins.
11 N
11
N
x4
Shelf Pins
11
Step 10 -

STEP-BY-STEP ASSEMBLY
14/14
Step 11-Assembly is now complete.
Dimensions Furniture, Inc
341 Gradle Drive, Carmel, IN 46032
1-866-528-8364 / suppor[email protected]om
LIMITED ONE YEAR WARRANTY
Warranty available to original purchaser only. Proof of purchase is required. This warranty is your sole remedy for product defect
and does not cover damage due to mishandling, misuse, or abuse. The manufacturer is not responsible for incidental or
consequential damages.
This warranty gives you specic legal rights and you may also have other rights which vary from state to state.
It may be necessary to raise or lower leg height
to eliminate wobble. Rotate the adjustable foot
glides right to lower. Rotate left to raise. RAISE LOWER

Printed in China

INSTRUCIONES DE ENSAMBLAJE
Model: #8682B
MōDRN Retro Glam Marion Sleigh Base Buet
1/14
Número de Lote: _________________
Fecha de Compra: ___ / ___ / ____
Manufactured by: Dimensions Furniture, Inc
341 Gradle Drive, Carmel, IN 46032
1-866-528-8364 / [e-mail]
ADVERTENCIA La capacidad de peso máximo como se menciona anteriormente no debe excederse
y se supone que se distribuye de manera uniforme. Exceder la capacidad de carga puede provocar
un colapso y una posible lesion.
!
7
5
lbs
2
5
l
b
s
Carga Máxima
ESTE MANUAL DE INSTRUCCIONES CONTIENE INFORMACION IMPORTANTE DE SEGURIDAD PORFAVOR LEALO Y GUARDELO PARA
UNA FUTURA REFERENCIA
Gracias por su compra. Queremos asegurarnos que sea de su plena satisfaccion. La herramienta es separada individualmente para
facilitar su indenticacion. Identique y cuente todas sus piezas , asegurandose que su herramienta coincida con las ilustraciones
mostradas.
Si falta una pieza o esta defectuosa porfavor contacte a nuestro departamento de servicio al cliente su satisfaccion es nuestra
principal prioridad.
Servicio al cliente - 1-866-528-8364 / [email protected]
Nuestros productos estan diseñados y fabricados, para cumplir con la mas alta calidad. En caso que tenga preguntas de
ensamblaje o partes faltantes o dañadas porfavor no Devolver el producto, nuestro departamento de servicio al cliente apreciara
la oportunidad de Proporcionar cualquier ayuda necesaria ,con respecto al ensamblaje y piezas necesarias.

!
El ensamble deve realizarse en un entorno seguro y seco.
El ensamble lo puede hacer una sola persona pero se recomienda dos personas.
La llave Allen esta disponible para el ensamble.
Verique que todas las piezas y el hardware estén incluidos antes de comenzar el ensamblaje.
Guarde toda la herramienta de ensamblaje hasta que se complete el montaje, para evitar
El extravio accidental de partes pequeñas.
Porfavor tener precaucion al levantar el producto.
Nunca subirse en el producto , tampoco utilizarlo como escalera.
Periodicamente apriete herramienta expuesta.
Si alguna pieza falta o esta dañada o gastada , deje de usarla hasta que sea reemplazada por
Por una pieza identica.










PRECAUCION ! Porfavor lea las instrucciones antes de comenzar el ensamblaje.
PREPARACION DE PRE-ENSAMBLAJE:
2/14
Tarugo de Madera
Perno Largo con Arandela
20 piezas
16 piezas
Perno largo con
arandela de seguridad
Perno corto con arandelas
8 piezas
8 piezas
Tornillo de cabeza redonda
Bisagra
24 piezas
4 piezas
Tornillo de cabeza plana
Perno de cabeza redonda
24 piezas
8 piezas
Manija izquierda
Manija derecha
1 pieza
1 pieza
Pin de estante
Llave Allen
12 piezas
1 pieza
2/14
1
2
3
4
5
6
7
8
9
10
11
12

3/14
PREPARACIÓN PRE-EMSAMBLAJE:
LISTA DE PARTES
AB
C
Panel Superior 1 pieza Marco Lateral Izquierdo 1 pieza
Marco Lateral Derecho 1 pieza
D
Panel Lateral Izquierdo 1 pieza
EF
G
Panel Lateral Derecho 1 pieza Divisor Izquierdo 1 pieza
Divisor Derecho 1 pieza
H
Panel Inferior 1 pieza
IJ
K
Pata Central 2 piezas Panel Posterior 1 pieza
Panel de la Puerta Izquierda 1 pieza
L
Panel de la Puerta Derecha 1 pieza
M
Panel del Estante 2 piezas
N
Panel del Estante Central 1 pieza

ENSAMBLE PASO POR PASO
Paso 1 -coloque el panel superior sobre una supercie plana. Inserte ocho Tarugos de Madera en cada oricio como se
muestra a continuación.
4/14
x8
Tarugo de Madera
1
A1
1
A

ENSAMBLE PASO POR PASO
5/14
Paso 2 - Coloque los paneles laterales izquierdo y derecho y los divisores izquierdo y derecho sobre los tarugos de
madera del panel superior . Coloque los paneles laterales y divisores usando ocho Pernos Largos con Arandelas .
Luego, coloque ocho tarugos de madera en el borde de los paneles laterales y divisores, como se muestra a
continuación.
x8
Pernos Largos
con Arandelas
x1
Allen Wrench
D E F G
1 A 2
1
2
E
G
F
D
A
1
x8
Tarugo de Madera
2
2
12
1