Dimplex DCES09WIFI User manual

27
17
16

The shape and position of buttons and indicators may vary according to
the model, but their function is the same.
The outlooking and some function of remote control may vary according
to the model.
The unit confirms the correct reception of each press button with a beep.
To select the mode of operation
To LED displayswitch on/off the
To activate or deactivate of the movement of the
deflectors.
To activate the function SLEEP
In cooling mode,press this button ,the temperature
will increase 2 on the base of setting temperature
In heating mode, press this button, the temperature
will decrease 2 on the base of setting temperature
Press this button to activate / deactivate the Super
function which enables the unit to reach the preset
temperature in the shortest time.
In COOL mode, the unit will give the maximum
cooling temperature with 16 ,high fan speed.
In HEAT mode, the unit will give the maximum heating
temperature with 31 ,high fan speed.
Press it to decrease temperature / time setting.
Press it to increase temperature / time setting.
Press it to start or stop operation.
Press it to set auto-off timer.
To select the fan speed of auto/low/mid/high
No.
8
10
12
6
7
9
MODE
SWING
DISPLAY
SLEEP
ECO
TURBO
11
1
(TEMP DN)
(TEMP UP)
2
3
4
ON/OFF
FAN
5TIMER
Button Function
To activate the function of Mute.
MUTE
8
3
6
7
9
10
5
12
4
1
2
11
13To activate the I Feel function.
I FEEL
13

REMOTE CONTROLLER
Remote controller DISPLAY
Meaning of symbols on the liquid crystal display
1
2
3
4
5
6
7
8
9
10
11
12
13
14
COOLING indicator
DEHUMIDIFYING indicator
FAN ONLY OPERATION indicator
HEATING indicator
SIGNAL RECEPTION indicator
TIMER OFF indicator
TIMER ON indicator
AUTO FAN indicator
LOW FAN SPEED indicator
MIDDLE FAN SPEED indicator
HIGH FAN SPEED indicator
SLEEP indicator
15
TUBRO indicator
16
17 HEALTHY indicator
18 ECO indicator
Meaning
No. Symbols
CLOCK indicator
1
2
3
4
5
6
7
8
9
10
11
12
13
14
FEEL mode indicator
COOLING indicator
DEHUMIDIFYING indicator
FAN ONLY OPERATION indicator
HEATING indicator
SIGNAL RECEPTION indicator
TIMER OFF indicator
TIMER ON indicator
AUTO FAN indicator
LOW FAN SPEED indicator
MIDDLE FAN SPEED indicator
HIGH FAN SPEED indicator
SLEEP indicator
SWING Up-Down indicator
15
TUBRO indicator
16
17 HEALTHY indicator
18 ECO indicator
Meaning
No. Symbols
CLOCK indicator
SWING Left-Right indicator
19
20 I FEEL indicator

COOL
HEAT

FAN
SWING
SLEEP
TIMER ON
TIMER OFF

FAN
DRY

SLEEP
FEEL

MODES OF OPERATION
I FEEL MODE
Automatic mode.
I Feel
I Feel
15
Child-Lock
Press "Mode" and "Timer" together to
active/disactive.
To activate I Feel function, press the button
on the remote controller. Press again to deactivate this
function.
This function enable the remote control measure the
temperature at its current location and send this signal
7 times in 2 hours to the air conditioner to enable the
air conditioner to optimize the temperature around you
and ensure maximum comfort.
It will automatically deactivate 2 hours late after the
activation or temperature exceed the range 0~50 C
I Feel

16