Dimplex DCMFBHSH User manual

Alden
SmartHome Purifying Bladeless Fan
Model: DCMFBHSH
For domestic household use only.
INSTRUCTION MANUAL

2
CAUTION: FAILURE TO FOLLOW THESE INSTRUCTIONS MAY CAUSE
INJURY AND/OR DAMAGE AND MAY INVALIDATE YOUR WARRANTY
IMPORTANT
THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND
RETAINED FOR FUTURE REFERENCE.
Note also the information presented on the appliance
Please read the operating instructions carefully before using your fan for the
first time and keep them in a safe place.
WARNING - This appliance is for use only with the supplied power adapter.
WARNING - This appliance must not be used in a bathroom.
WARNING - Do not use this appliance in the immediate surroundings of a bath,
a shower or a swimming pool.
• If the mains lead is damaged it must only be replaced by the manufacturers
service agent or a similarly qualified person in order to avoid a hazard.
• This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure they do not play with the appliance.
• Prior to cleaning or other maintenance, the appliance must be disconnected
from the supply mains.
• Never immerse the appliance in water or other liquids.
• Do not place on soft, unstable or non-horizontal/angled surfaces.
• Never operate the appliance if a cable or connector has been damaged,
after appliance malfunction or if the appliance was dropped or is otherwise
damaged.
• Please ask a professional service agent to repair the product. Improper repair
may cause danger to users.
• Disconnect the appliance from mains power whenever it is not in use, before
relocating it, and before cleaning.
• Operate the appliance only at the voltage specified on the rating label.
• Only connect the unit to a properly installed and easily accessible socket so
that you can quickly disconnect the plug if necessary.
• Do not connect this product to the mains using an extension lead.
• This fan is only intended for INDOOR RESIDENTIAL applications. This fan
should not be used for commercial or industrial or leisure applications or in
small enclosed spaces.
• Never use the mains lead as a carrying strap or pulling lead.

3
• To avoid a fire or electrocution hazard, NEVER put the cord near heat
registers, radiator, stoves or heaters.
• DO NOT cover cord with carpeting, throw rugs, runners, or similar coverings.
• DO NOT route cord under furniture or appliances. Take care to position the
cord away from trac areas and where it will not be a tripping hazard.
• DO NOT use the unit near windows or where water collects. Rain and water
collection may lead to a risk of fire or electric shock.
• DO NOT COVER.
• Only operate this appliance with a minimum of 50cm clearance all around
i.e. away from walls, furniture and overhanging objects such as curtains or a
shelf.
• WARNING: To avoid danger of suocation please remove all packaging
materials particularly plastic and EPS and keep these away from vulnerable
people, children and babies.
• NEVER drop or insert any object or fingers into any openings.
• Do not use the appliance in locations where paint, petrol or other flammable
liquids are used or stored.
• Do not use bug sprays or other flammable cleansers/vapour sprays on or
around the unit.
• Always switch o the unit and take the plug out of the socket
• If you are not using the unit
• Before you clean or carry out maintenance on the unit
• If a fault occurs
• In the event of an electrical storm.
• Avoid electromagnetic interference. Keep the unit at least 1 metre away from
electrical appliances such as televisions & radios.
• Swallowing may lead to serious injury in as little as 2 hours or death,
due to chemical burns and potential perforation of the oesophagus.
• If you suspect your child has swallowed or inserted a button battery
immediately call the 24-hour Poisons Information Centre on 13 11 26 (in
Australia) or 0800 764 766 (in New Zealand) for fast, expert advice.
• Examine devices and make sure the battery compartment is correctly
secured, e.g. that the screw or other mechanical fastener is tightened.
Do not use if the compartment is not secure.
• Dispose of used button batteries immediately and safely. Flat batteries
can still be dangerous.
WARNING - KEEP BATTERIES OUT OF REACH OF CHILDREN

4
4

















 












5
Model no. DCMFBHSH
Rated voltage 24VDC
Rated voltage/frequency for adaptor 100-240V 50/60Hz
Rated power 35W
Speed settings 9
Modes Sleep & Strong
Timer 0-8hr
Wind flow (max) 3.5m/s
Motor DC
Controls Touch or remote
Oscillation 80 degrees
Noise level ≤55dB
Weight 2.84kg
Dimensions (w x d x h) 235 × 230 × 592mm
• For greater precision, please always refer to the rating label placed on the product.
Specification

6
Parts
Air outlet
Body
Air duct
Air duct
Air inlet
Air inlet
Power connection
Touch screen button/
LED display
Base
Top cover of
air purifier filter
Top cover of
air purifier filter

7
Fan Operation
A. Assembly
This bladeless fan comes fully assembled. Please remove any packing materials prior to
first use.
B. Battery Installation
1. Unscrew and remove the
battery cover at the back of
remote control
2. Insert the CR2025 battery
3. Replace the battery cover
C. Remote control panel
Buckle
Screw
Power button Swing
Strong wind mode Increase/decrease
airflow buttons
UV sterilization Sleep timer

8
D. LED Display
The fan can also be controlled by pressing the LED Display, however not all
settings can be accessed this way. Refer to the ‘Operation’ section for instructions.
The remote control should
be pointed at the remote
control signal receiver on
the display to maximize
the remote control signal.
Fan Operation
LED Display
E. Smartphone App Control
Every function of the fan can be controlled from your Smartphone. Search and
download “Tuya Smart” from your App Store to get started - you will need to
register an account when using for the first time.
1. Once you have downloaded and opened TUYA, you can add a device.
2. Select ‘Add Manually’ and choose the category Small Home Appliances>Fan
(Wi-Fi)
3. Follow the prompts to add your home WiFi network connection details
4. To pair/reset the fan, press and hold the LED display on the fan for 5 seconds
(you will hear 3 beeps). An “F” will appear and blink on the display of the fan.
Tick the box shown on your app screen to confirm the “F” indicator light is
blinking and tap `Next’.
5. The app will add the fan and then you can edit device name to a more
familiar term.
6. Once added successfully, you can access all functions from the TUYA display,
much like using a remote.
7. You can add multiple devices with the one TUYA app, and multiple users can
control the device at a time.

9
Operation
ATTENTION:
PLEASE READ THIS MANUAL CAREFULLY BEFORE CONNECTING DEVICE
TO THE POWER SUPPLY. CHECK THE VOLTAGE MATCHES THE UNIT RATING
BEFORE OPERATING.
(RATED ELECTRIC POWER FOR POWER ADAPTOR: 220-240V; 50 Hz).
WARNING -THIS APPLIANCE IS FOR USE ONLY WITH THE SUPPLIED POWER
ADAPTER.
Note: You will hear a beep sound for every press of the button on the fan or
remote control. This cannot be turned o.
REMOTE CONTROL OPERATION
1. Turn the fan On/O by pressing the Power button.
2. The strong wind mode can only be turned on via the remote control.
When this mode is activated a ‘H’ will appear on the LED display screen.
Press the speed increase ‘+’ or decrease ‘-’ button to exit this mode.
3. UV sterilisation can only be turned on via the remote
control. Press the button once to turn on. When this
function is activated a ‘U’ will appear on the LED display
screen. Press the button again to cancel UV sterilisation.
UV sterilization will automatically shut down after 1 hour.
4. Press the oscillation button to begin oscillation.
Press the oscillation button again to cancel oscillation.
5. Press the speed increase ‘+’ or decrease ‘-’ buttons to cycle through the
speed settings from 1-9. The selected speed setting will appear on the
LED display.
6. This purifying fan is equipped with a 1 to 8 hour auto o timer. Press the timer
button to set the timer in 1 hour increments. The set time will briefly appear
on the LED display. To cancel the timer, cycle through the hours set until ‘0’
shows on the display. Other settings can still be used when a timer is set.
SMARTPHONE APP OPERATION
The TUYA app allows you access to three main wind modes:
Sleep – Low wind mode
Fresh – Natural wind mode
Boost – Strong wind mode*
*This mode can also be activated via the remote control
All other functions are the same as outlined under Remote Control Operation.
Display “U”

10
Operation
LED DISPLAY OPERATION
Some functions can be operated by pressing the LED Display. To have full use of
all functions, please use the remote control.
1. Hold fan body with one hand and set the
wind outlet to the desired angle.
2. Turn the fan On by pressing the LED Display
screen for 1 second until you hear 1 beep.
The fan will start working in the previous
settings. To turn the fan o, press and hold
the LED display screen for 2 seconds until
2 beeps sound.
3. When the fan is already on, press the LED Display for 1 second to start
oscillation - 1 beep will sound. To stop oscillation, press the LED display for
1 second and the fan will beep once and stop oscillating.
4. To adjust the fan speed, briefly touch the LED Display to cycle through the
desired speed settings (1 to 9), a beep will sound for every speed change.
The speed setting will display on the screen.
FILTER
This purifying bladeless fan comes equipped with a HEPA-11 Filter which traps
99.97% of airborne allergens, pollutants, bacteria and gases. Please follow the
steps below to install/replace the air filter.
1. Turn the filter system top cover counter-clockwise to unlock the
filter chamber.
2. Connect or disconnect the filter from the top cover by gently
pulling the white cover from the filter
3. After assembling, put back into the filter chamber and secure
by turning the top cover clockwise.
15° 15°