Dinstar DXP60 User manual

Quick Start Guide
For DXP60 Expansion Module
欢迎您选购鼎信通达旗下产品！
安装设备之前请仔细阅读本安装指导。鼎信通达为客户提供全方位的技术支持，需要更多在线
技术支持，请拨打技术支持热线电话：[phone]。
网址：www.dinstar.cn
THANKS FOR CHOOSING DINSTAR’S PRODUCT!
Please read this guide carefully before using this product. If you need any technical
support, please contact us.
Tel: [phone]
Email: [e-mail]
Web: www.dinstar.com

Packaging Contents
1
Hardware Component Instructions
2
It is used to activate SIP accounts and configure various functions. It supports up to 60
EXT keys.
Indicates the EXT key status.
EXT Key
LED Indicator
The following items are included in your package. If you find anything missing, please
contact our supporting and customer service center.
Note: To support two or three expansion modules, an external power adapter (5V/1A) is required.
The package box does not include the power adapter by default, users need to purchase an
external power adapter.
The main hardware components of the DXP60 expansion module are the LCD
screen and the keys.
Expansion Module Connecting Sheet
and Screws Ethernet Cable EXT cable
Color L CD Screen
Page Key
EX T Key
LE D Indicator
Displays the connection status of the expansion module, the key feature and located
page.
Presses these keys to navigate to corresponding page to view more keys.
Color
LCD Screen
Page Key
Stand

Connect IP Phone with Expansion Module
Remove the Handset, Ethernet Cable, and Power Adapter (optional) from the IP phone before
installing the expansion module. Remove the IP phone from the phone stand and place it on a
flat tabletop.
Put the IP phone and the expansion module on a flat tabletop, and then connect the IP phone
and the expansion module connecting with sheet and screws supplied.
(1)
Connect the EXT port on the IP phone (or expansion module) to the EXT port on the
expansion module by using the supplied EXT cable.
Connect the PC port on the IP phone to the Internet port on the expansion module by using the
supplied ethernet cable.
(2)
(3)
Connecting one expansion module on a single IP phone is shown as below:
Note: Please choose the official power adapter to avoid device damage!
Install the Expansion Module
3
DXP60 expansion module supports Dinstar C63 series, C64 series and C66 series IP phones.
Please choose the correct IP phone model before installing and configuring the expansion
module.
The IP phone supports up to 3 modules daisy-chain. When connecting two or more expansion
modules, the power adapter is required, otherwise the expansion modules will be in trouble with
startup and usage.

Connecting two or more expansion modules on a single IP phone is shown as
below:
Note: The electricity of module has been automatically provided from the IP phone to the
expansion module(s) upon connection. If you want to use more than one expansion modules on a
single phone, you need to connect an additional power adapter (5V/1A) to any one of the
expansion modules.

AA
B
B
Startup
4
After the IP phone is powered on and connected to network, the IP phone and
expansion module will start up automatically. And then the IP phone will be
automatically bound to the Extension Module via the EXT cable and the Ethernet
cable. You can configure the phone via the phone’s user interface or the web user
interface.
Attach the stand

Configure via the Web interface on your PC
Access the Web interface of the IP Phone
(1)
Press the key when the phone is idle to obtain the IP address of the phone.
·
Open a web browser on your PC, enter the IP address into the address bar (e.g.,
http://192.168.11.110'), and then press Enter.
·
Enter the username (default: admin) and password (default: admin) in to the login page
and then click Login.
·
Click “Phone→Expansion Module→EXT Key”, select expansion module index and
page, configure the type of EXT key, and enter the corresponding value.
(2)
Note: The number of features that can be configured for the EXT key is 32. Please refer to the
user manual or contact technical support for more details.
OK
IP COMMUNICATION SOLUTIONS
Shenzhen Dinstar Co., Ltd.
Web: www.dinstar.com
Configure via the user interface on the IP Phone
Press and on the IP phone to select the type of key, and press or to enter the
corresponding value.
(2)
Press the Save soft key to keep the change.
(3)
Configure EXT Key
Configure Expansion Module
5
The LCD screen and the keypad on the IP phone allows you to execute
configurations of the expansion module.
Select any EXT key on the expansion module, then press and hold it for more than one
second, and the EXT key configuration page will be displayed on the screen of the IP
phone.
(1)
Note: The DXP60 expansion module supports 20 programmable keys for each page, and up to 3
pages. You can change pages by using the left and right page keys.