DirekTronik 20102099 User manual

30M HDMI Extender over 60GHz WIRELESS
Support 4K@30Hz YUV 4:4:4 8Bit
Best.nr: 20102099

Operating Instructions
Dear Customer
Thank you for purchasing this product. For optimum performance and safety, please read these
instructions carefully before connecting, operating or adjusting this product. Please keep this
manual for future reference.
Notice
The information in this document is subject to change without notice. Every effort has been made
in the preparation of this document to ensure accuracy of the contents, but all statements,
information, and recommendations in this document do not constitute the warranty of any kind,
express or implied.
1. Features
60Ghz wireless extender
Support the highest Resolution up to 4K@30Hz YUV 4:4:4 8bit
Support the longest transmission distance to 10M wireless under 4K30HZ, 30m under
1080P@60Hz with certain conditions, like open space/horizontal height of equipment, etc
Support HDCP1.4,compatible with HDCP2.2 Blu-Ray player, follow the output HDCP. But
there will be no image if the sink is decrypted.
Support 100-230V voltage input, DC5V power supply
Support Many to one(7 TX max to 1 RX), One to many(1 TX to 2 RX max)
Reset and pairing button for both TX and RX
No Latency
2

Operating Instructions
2. SPECIFICATIONS
Operating Temperature Range
0 to +40℃(+32 to +104℉)
Operating Humidity Range
10 to 90%RH (No Condensation)
Connectors on Transmitter
HDMI Receptacle x 1
Power USB x 1
Connectors on Receiver
HDMI Receptacle x 1
Power USB x 1
HDMI input/output port
HDMI Type A 19-pin
HDMI Version
HDMI1.4/HDCP1.4
Resolution outputs
4k@30hz/1080p//720p/480p
Frequency
60GHz
Frequency width
100MHz
RF power
10dBm MAX
Antenna
Matrix style Antenna
Audio format supported
PCM 2.0,Dolby True HD,DTS-HD master audio
Latency
< 3ms
Power supply
DC 5V 1A Power supply
Power consumption
3.5W(MAX)
Transmission Distance
10m under 4K@30Hz, 30m under 1080P@60Hz
Dimension (L×W×H)
TX: L80xW68xH16.5mm; RX: L80xW68xH16.5mm
Net Weight
TX: 55g; RX:55g
3. Package Contents
1xHDMI Transmitter
1xHDMI Receiver
2xUSB Cable
2x5V DC Adapter
2xAdjustable bracket
1xUser Manual
3

Operating Instructions
4. PANEL DESCRIPTIONS
Transmitter Panel
①HDMI input port ②DC 5V port
③Reset button ④Pairing button
⑤Signal indicator
Receiver Panel
①HDMI input port ②DC 5V port
③Reset button ④Pairing button
⑤Signal indicator
4

Operating Instructions
5. Connecting and operating
1. Connect 1 source such as a Blu-Ray Player, game console, STB, etc. to the HDMI input on the
transmitter
2. Connect 1 display such as an HDTV or HD Projector to the HDMI output on the receiver .
3. Power on the transmitter and receiver,pairing TX and RX first, then start working.
Connection Diagram
5

Operating Instructions
6. Installation instructions
1.Screw up the adjustable bracket to TX and RX back side hole.
2.Adjust the TX and RX position within 0°-90°by rotating the 90° rotation ball.
3.Loosen 360° rotation ball, then able to adjust TX and RX position within 0°-360°
4.TX and RX can be fixed on the wall with 3 mounting holes on the bottom of the adjustable
bracket
Remark: Adjust TX and RX to 45° position when in the complex environment with barrier, it will
increase the signal reception.
Adjust TX and RX to 90° position when in open space without barrier,transmission distance will be
longer and signal will be more stable
6

Operating Instructions
7. LED status indicator and button instruction
1. The device includes one LED status indicator: yellow data transmission indicator
The indicator always on when data transmission stable through WIFI;Otherwise, the indicator
will flickering.
2. Reset button: when power on, long press the reset button 5S to reset the device.
3. Pairing button:long press the pairing button on both TX and RX simultaneously(about 6S) until
the data transmission indicator(located in the middle of the panel) goes out.
under one to many or many to one application, able to switch between input and output by short
press pairing button.
NOTED:
Under one to many mode, when one channel output signal is weak,it will be automatically switched
to the one channel output with strong signal.
7

Operating Instruction
MAINTENANCE
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzine to clean this unit.
PRODUCT SERVICE
1) Damage requiring service:
The unit should be serviced by qualified service personnel if:
(a) The DC power supply cord or AC adaptor has been damaged;
(b) Objects or liquids have gotten into the unit;
(c) The unit has been exposed to rain;
(d) The unit does not operate normally or exhibits a marked change in performance;
(e) The unit has been dropped or the cabinet damaged.
2) Servicing Personnel: Do not attempt to service the unit beyond that described in
these operating instructions. Refer all other servicing to authorized servicing personnel.
3) Replacement parts: When parts need replacing ensure the servicer uses parts
specified by the manufacturer or parts that have the same characteristics as the
original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.
4) Safety check: After repairs or service, ask the servicer to perform safety checks
to confirm that the unit is in proper working condition.
WARRANTY
If your product does not work properly because of a defect in materials or workmanship, our
Company (referred to as "the warrantor" ) will, for the length of the period indicated as below,
(Parts(2)Year, Labor(90) Days) which starts with the date of original purchase ("Limited
Warranty period"), at its option either(a) repair your product with new or refurbished parts, or (b)
replace it with a new of a refurbished product. The decision to repair or replace will be made by the
warrantor.
During the "Labor" Limited Warranty period there will be no charge for labor.
During the "Parts" warranty period, there will be no charge for parts. You must mail-in your
product during the warranty period. This Limited Warranty is extended only to the original
purchaser and only covers product purchased as new. A purchase receipt or other proof of original
purchase date is required for Limited Warranty service.
8

Operating Instructions
MAIL-IN SERVICE
When shipping the unit carefully pack and send it prepaid, adequately insured and preferably in the
original carton. Include a letter detailing the complaint and provide a day time phone and/or email
address where you can be reached.
LIMITED WARRANTY LIMITS AND EXCLUSIONS
1) This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and
DOES NOT COVER normal wear and tear or cosmetic damage.
The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment, or
failures which are caused by products not supplied by warrantor, or failures which result from
accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up
adjustments, misadjustment of consumer controls, improper maintenance, power line surge,
lightning damage, modification, or service by anyone other than a Factory Service center or other
Authorized Servicer, or damage that is attributable to acts of God.
2) THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED
WARRANTY COVERAGE". THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR
ARISING OUT OF ANY BREACH OF THIS WARRNTY. (As examples, this excludes damages
for lost time, cost of having someone remove or re-install an installed unit if applicable, travel to
and from the service, loss of or damage to media or images, data or other recorded content. The
items listed are not exclusive, but are for illustration only.)
3) PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY,
ARE YOUR RESPONSIBILITY.
9