DirekTronik 20101676 User manual

100M HDMI Extender over WIRELESS with
loop out, Support 1080P@60Hz YUV 4:4:4 8Bit
Best.nr: 20101676

Operating Instructions
Dear Customer
Thank you for purchasing this product. For optimum performance and safety, please read these
instructions carefully before connecting, operating or adjusting this product. Please keep this
manual for future reference.
Notice
The information in this document is subject to change without notice. Every effort has been made
in the preparation of this document to ensure accuracy of the contents, but all statements,
information, and recommendations in this document do not constitute the warranty of any kind,
express or implied.
1. Features
Support the highest Resolution up to 1080P@60Hz YUV 4:4:4 8bit(both of input and output)
Support the longest distance to 100M wireless transmitted under certain conditions, like open sp
ace/horizontal height of equipment, etc
Support HDCP 1.4, compatible with HDCP 2.2 Blu-Ray player, decryption output
Support 100-230V voltage input, DC12V power supply
With prompt to video output interface
Support IR control with long distance
Built in reset button
2

Operating Instructions
2. SPECIFICATIONS
Operating Temperature Range
0 to +40℃(+32 to +104℉)
Operating Humidity Range
10 to90%RH (No Condensation)
Connectors on Transmitter
HDMI Receptacle x 2 (1xHDMI input, 1xHDMI loop output)
Power DC Receptacle x 1
IR Receptacle x 1(for IR TX )
Connectors on Receiver
HDMI Receptacle x 1
IR Receptacle x 1(for RX cable)
Resolution outputs
1080p/1080i/720p/576p/480p
Audio format supported
Uncompressed audio PCM 2.0
Output Video Signal
HDMI
Dimension (L×W×H)
TX: L170xW114.8xH26mm; RX: L170xW114.8xH26mm
Power supply
DC 12V 1A Power supply
Power consumption
4W(MAX)
Transmission Distance
1080p up to 100m
Net Weight
TX: 200g; RX:180g
3. Package Contents
1xHDMI Transmitter
1xHDMI Receiver
1 x IR TX Emitter
1x IR RX Receiver
2x12V DC Adapter
1xUser Manual
3

Operating Instructions
4. PANEL DESCRIPTIONS
Transmitter Panel
①HDMI input port ②HDMI loop out port
③IR out Port ④DC 12V port
⑤Built-in reset button ⑥ON-OFF switch
Receiver Panel
①HDMI output port ②IR In port
③Built-in reset button ④DC 12V port
⑤ON-OFF switch
4

Operating Instructions
5. Connecting and operating
1. Connect 1 source such as a Blu-Ray Player, game console, STB, etc. to the HDMI input on the
transmitter
2. Connect 1 display such as an HDTV or HD Projector to the Loop HDMI output on the
transmitter.
3. Connect 1 display such as an HDTV or HD Projector to the HDMI output on the receiver .
4. Plug in the IR-RX cable and IR-TX cable to the IR jack port located on the Receiver and
transmitter banal.
5. Power on the transmitter and receiver, turn on and match TX and RX first, then start working.
Connection Diagram
5

Operating Instructions
6. LED status indicator instruction
1. The device includes two kinds of LED status indicator: green power indicator and blue data
transmisson indicator
Power LED: Green, indicator light always on during power on, indicator light out when power
off
Action LED: Blue, indicator light blinks at 4Hz per second during wifi data transmisson,
indicator light always on when no data transmisson
2. Reset buton: the reset button hidden inside the device, Press and hold 8s until you see the blue
status indicator turn off. Release the button, complete the factory reset.
NOTED:
1. When using the device first time, need match TX and RX, when power on, firstly connecting
loop out of TX and output of RX via HDMI cable, then short press the built-in reset button of RX
and TX in turn, waiting for the blue indicator blinks with nornal frequency, means match succeed,
at this time connecting input and output to display image normally,
2. If the device has been matched or used before, reset the device firstly, then match,
3. If the device can not display image after matching, suggest to restart.
7.Video output interface instruction
1. When the device power on and start to connect, the output interface of RX display below:
2. Interface of searching signal from input
6
Operating Instructions

Operating Instructions
3. Video outputt interface prompts when no signal from input
7

Operating Instructions
MAINTENANCE
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzine to clean this unit.
PRODUCT SERVICE
1) Damage requiring service:
The unit should be serviced by qualified service personnel if:
(a) The DC power supply cord or AC adaptor has been damaged;
(b) Objects or liquids have gotten into the unit;
(c) The unit has been exposed to rain;
(d) The unit does not operate normally or exhibits a marked change in performance;
(e) The unit has been dropped or the cabinet damaged.
2) Servicing Personnel: Do not attempt to service the unit beyond that described in
these operating instructions. Refer all other servicing to authorized servicing personnel.
3) Replacement parts: When parts need replacing ensure the servicer uses parts
specified by the manufacturer or parts that have the same characteristics as the
original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.
4) Safety check: After repairs or service, ask the servicer to perform safety checks
to confirm that the unit is in proper working condition.
WARRANTY
If your product does not work properly because of a defect in materials or workmanship, our
Company (referred to as "the warrantor" ) will, for the length of the period indicated as below,
(Parts(2)Year, Labor(90) Days) which starts with the date of original purchase ("Limited
Warranty period"), at its option either(a) repair your product with new or refurbished parts, or (b)
replace it with a new of a refurbished product. The decision to repair or replace will be made by the
warrantor.
During the "Labor" Limited Warranty period there will be no charge for labor.
During the "Parts" warranty period, there will be no charge for parts. You must mail-in your
product during the warranty period. This Limited Warranty is extended only to the original
purchaser and only covers product purchased as new. A purchase receipt or other proof of original
purchase date is required for Limited Warranty service.
8

Operating Instructions
MAIL-IN SERVICE
When shipping the unit carefully pack and send it prepaid, adequately insured and preferably in the
original carton. Include a letter detailing the complaint and provide a day time phone and/or email
address where you can be reached.
LIMITED WARRANTY LIMITS AND EXCLUSIONS
1) This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and
DOES NOT COVER normal wear and tear or cosmetic damage.
The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment, or
failures which are caused by products not supplied by warrantor, or failures which result from
accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up
adjustments, misadjustment of consumer controls, improper maintenance, power line surge,
lightning damage, modification, or service by anyone other than a Factory Service center or other
Authorized Servicer, or damage that is attributable to acts of God.
2) THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED
WARRANTY COVERAGE". THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR
ARISING OUT OF ANY BREACH OF THIS WARRNTY. (As examples, this excludes damages
for lost time, cost of having someone remove or re-install an installed unit if applicable, travel to
and from the service, loss of or damage to media or images, data or other recorded content. The
items listed are not exclusive, but are for illustration only.)
3) PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY,
ARE YOUR RESPONSIBILITY.
9