Dirtydog 4x4 J2TR07R1BK User manual

Installation Instructions
J2TR07R1BK
TRENCH BARRIER FOR
JK 2 DOOR 2007 -UP
-Thank you for purchasing a Dirtydog 4x4 trench barrier. Please
read these instructions fully to familiarize yourself with the
installation. This should only take about 10 minutes to install the
first time
This barrier is designed to be used only when the rear seat is
removed. To install the barrier you must first remove the rear seat.
Place the bottom bar in front of the seat bracket. Be sure to slide
both sides of the strap uder the first loop of the floor bracket.
Continue to slide the bottom strap through the next loop and tighten
the strap down as shown. Do this step on both sides.
Slide the 4 straps
through the slits on the
front of the barrier as
shown

Install the two plastic hooks
as shown under the tub lip
so this grabs onto the tub.
Postion these directly above
the lower floor brackets.
Slide the top straps through
the slot in the plastic hook
and tighten. Do this on both
sides. Your barrier is now
installed.
Dirtydog 4x4
6-2045 Dundas St. E. Road
Mississauga, ON L4X 1M2
1-855-704-0708
Question? Call or email [email protected]
Your barrier comes with a
three year warranty against
manufacturing defects.