DIVERSIFIED WOODCRAFTS Shain PT-TABLES User manual

[1]
PT-TABLES
ASSEMBLY INSTRUCTIONS
*Model views may not represent exact model purchased
All manuals and user guides at all-guides.com

[2]
TABLE OF CONTENTS
ASSEMBLY COMPONENTS_______________________________________3
LEG ASSEMBLY_________________________________________________4
STRETCHERS____________________________________________________4
All manuals and user guides at all-guides.com

[3]
ASSEMBLY COMPONENTS
ITEMS INCLUDED
PART #
PART#
1-TOP,TABLE
2-LEG,PANEL,PED
227569
4-LEG LEVELER
100079
HARDWARE BOX
STRETCHER,LEG
227927
228501
REV DESCRIPTION DATE
---
Original Created
6-10-09
NAM
All manuals and user guides at all-guides.com

[4]
Assembly Instructions
Items not included but needed for assembly:
1. ½” wrench
Instructions:
1. Lay the table on the floor with the bottom up. (Be sure to lay the table on a clean
surface so you don’t damage the tabletop.)
2. Take each of the table legs and insert the stretcher stud through the predrilled
holes. The stretcher with the drilled holes goes on the top. Attach with 8-
SCREW,7MMX70MM,CONN,ALLENHEAD
All manuals and user guides at all-guides.com

[5]
3. Center legs on top. Attach the legs to the top using 10- screws provided.
All manuals and user guides at all-guides.com

[6]
4. Screw leg levelers into t-nut in the bottom of the leg.
5. Turn the table over so the top is up. Set your table in place and adjust the leg
levelers to level the table.
Leg levelers
All manuals and user guides at all-guides.com