dji AGRAS T30 User manual

2021.08v1.2
User Guide
使用說明
ユーザーガイド
사용자 가이드
Hướng dẫn sử dụng
Benutzerhandbuch
Guía de usuario
Guide d’utilisateur
Guia do Usuário
T30/T10 Intelligent Flight Battery

EN
2
Disclaimer
Congratulations on purchasing your new DJITM product. Read this entire document and all safe
and lawful practices DJI provided carefully before use. Failure to read and follow instructions
and warnings may result in serious injury to yourself or others, damage to your DJI product,
or damage to other objects in the vicinity. By using this product, you hereby signify that you
have read this document carefully and that you understand and agree to abide by all terms and
conditions of this document and all relevant documents of this product. You agree to only use
this product for purposes that are proper. You agree that you are solely responsible for your own
conduct while using this product, and for any consequences thereof. DJI accepts no liability
for damage, injury, or any legal responsibility incurred directly or indirectly from the use of this
product.
DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as “DJI”) and its aliated
companies. Names of products, brands, etc., appearing in this document are trademarks
or registered trademarks of their respective owner companies. This product and document
are copyrighted by DJI with all rights reserved. No part of this product or document shall be
reproduced in any form without the prior written consent or authorization of DJI.
This document and all other collateral documents are subject to change at the sole discretion of
DJI. For up to date product information, visit www.dji.com and click on the product page for this
product.
This document is available in various languages. In the event of divergence among different
versions, the English version shall prevail.
Read Before First Use
The following terms are used in this document and on the warning labels on the product to indicate
various levels of potential harm when operating this product:
CAUTION: Procedures which, if not properly followed, create a possibility of physical property
damage AND a small possibility of injury.
WARNING: Procedures which, if not properly followed, create the probability of property damage,
collateral damage, and serious injury OR a high probability of supercial injury.
This product must be operated with caution and expertise. Failure to operate this product in a safe
and responsible manner could result in injury or damage to the product or other property. This product
is not intended for use by those who are under 18 years old. DO NOT alter this product or use this
product with incompatible components. This document contains instructions for safety, operation,
and maintenance. It is essential to read and follow all of the instructions and warnings herein, prior to
assembly, setup, or use, in order to operate the product correctly and avoid damage or serious injury.

EN
3
Introduction
The T30 Intelligent Flight Battery applies to DJI AGRASTM T30 and has a capacity of 29000
mAh at a nominal voltage of 51.8 V, while the T10 Intelligent Flight Battery applies to DJI
Agras T10 and has a capacity of 9500 mAh with the same voltage. The metal shell and
rubber caps effectively protect the battery, and the high energy battery cells and the
advanced power management system provide long-lasting power to an aircraft.
The T10 Intelligent Flight Battery is used as an example below.
123
4
5 6
1. Power Button
Press to check the battery power level. Press and then press and hold to power on the
battery. Only power the battery on and off when it is connected to the aircraft. Otherwise,
the power ports on the battery and the aircraft will be damaged.
2. Status LEDs
Indicate the battery level. From left to right: LED 1, LED 2, LED 3 and LED 4.
3. Handle
Use the handle to carry the battery.
4. Clamp
Usetheclamptormlyattachthebatterytotheaircraft.Presstheclamptoremovethe
battery from the aircraft.
5. Power Port
Connects to an aircraft, battery station, or multifunctional inverter generator.
6. Rubber Caps
Protect the battery.

EN
4
Battery Functions
1. Battery Level Display: The status LEDs indicate the current battery level. Press the power
button to check.
2. Communication: Battery parameters including the voltage and power level are transmitted
to the aircraft to enable the aircraft to take appropriate action when battery parameters
change.
3. Charging Error Detection: Errors that occur during charging are indicated by the status
LEDs. When an error occurs, disconnect the battery and wait for the battery to fix the error
automatically. For more information, refer to the LED Patterns section.
4. Battery Error Records: The battery records errors such as excessive charging or
discharging, exceeding the temperature range when charging and discharging, and
storing a battery for an extended period with the power level outside of the recommended
range. The battery error records can be accessed by authorized DJI dealers when
troubleshooting or repairing.
5. Auto Balancing: In certain situations, the battery automatically balances the voltages of the
cells.
6. Auto Discharging: If fully charged for more than one day, the battery automatically
discharges to 97%. After 7 days, it automatically discharges to 60%.
7. Auto Current Adjustment: When using with the provided battery station, the battery
intelligently adjusts the charging current based on the temperature of the battery cell. The
battery also supports self-protection based on the environment temperature.
8. Temperature Control: The battery ensures the temperature difference between the battery
cells are the same and stay within the allowable temperature range.
• Refer to the safety requirements listed on the label of the battery before using for the
first time. Users accept full responsibility for any violations of the safety requirements
stated on the label.
• The product warranty is void if any battery errors occur due to misuse of the battery.
Using the Battery
Press and then press and hold the power button to power on the battery after it is connected
to the aircraft. When the aircraft lands and the motors stop, press and then press and hold the
power button to power o the battery, and then disconnect the battery from the aircraft.
• DO NOT use or leave the battery near heat sources such as a furnace or heater. DO
NOT leave the battery inside a vehicle on hot days.
• DO NOT allow the battery to come into contact with any liquid. DO NOT leave the
battery near a source of moisture and DO NOT use the battery in humid environments.
Otherwise, the battery may corrode, potentially resulting in the battery catching re or
exploding.

EN
5
• DO NOT use swollen, leaking, or damaged batteries. If your battery is abnormal, contact
an authorized DJI dealer for further assistance.
• Make sure the battery is powered o before connecting to or disconnecting from the
aircraft. DO NOT connect or disconnect the battery while it is powered on. Otherwise,
the power ports may be damaged.
• The battery should be used in the temperature range of -5° to 45° C (23° to 113° F). Use
of batteries in environments above 50° C (122° F) can lead to re or an explosion. Use of
the battery in temperatures below -5° C (23° F) can negatively aect the performance of
the battery. The battery can be used again when it returns to a normal temperature.
• DO NOT use the battery in strong electrostatic or electromagnetic environments or near
high-voltage transmission lines. Otherwise, the battery circuit board may malfunction,
which could cause a serious ight hazard.
• DO NOT disassemble or pierce a battery in any way or it may leak, catch re, or explode.
• The electrolytes in the battery are highly corrosive. If any electrolytes make contact with
your skin or eyes, immediately wash the affected area with water and see a doctor
immediately.
• DO NOT use a battery that has been dropped. Dispose of the battery as described in
the Battery Disposal section.
• If the battery falls into water while inserted in an aircraft during flight, take it out
immediately, and put it in a safe and open area. DO NOT use the battery again and
dispose of it properly as described in the Battery Disposal section.
• DO NOT put the battery in a microwave oven or a pressurized container.
• DO NOT place the battery on or near wires or other metal objects such as eyeglasses,
watches, jewelry, and hairpins. Otherwise, the battery ports may be short-circuited.
• DO NOT drop or strike batteries. DO NOT place heavy objects on the batteries or
station. Avoid dropping batteries.
• Always use a clean, dry cloth when cleaning the battery terminals.
• DO NOT y when the battery power level is below 15%.
• Make sure the battery is correctly connected. Otherwise, the battery may overheat or
even explode due to abnormal charging. Only use approved batteries from authorized
dealers. DJI assumes no responsibility for any damaged caused by using batteries that
are unapproved.
• Make sure to lift the battery by the handle. DO NOT lift it by holding the cables.
• Make sure the battery is placed on a at surface.
• DO NOT place anything on a battery. Otherwise, the battery may be damaged, which
may lead to re hazards.
• The battery is heavy. Be careful when moving the battery to avoid dropping it. If the
battery is dropped and damaged, immediately leave the battery in an open area away
from people. Wait 30 minutes and soak the battery in water for 24 hours. After making
sure the power has completely run out, dispose of the battery in accordance with local
laws.

EN
6
• Make sure the battery is fully charged before each ight.
• Immediately land the aircraft if a critical battery level warning appears and replace with a
fully charged battery.
• Before operating in a low-temperature environment, make sure the battery is at least
above 5° C (41° F). Ideally, above 20° C (68° F).
LED Patterns
The Battery Level Indicators will show the current battery level and status during charging and
discharging. The indicators are dened below:
LED is on LED is blinking
LED is o
Checking Battery Level
If the battery is in power saving mode, press the power button once to check the current battery
level.
LED1 LED2 LED3 LED4 Battery Level
88-100%
75-87%
63-74%
50-62%
38-49%
25-37%
13-24%
0-12%
LED Patterns During Charging
During charging, the LEDs blink in sequence to indicate the current battery level. Disconnect
the battery when charging is complete, and always use the ocially recommended charging
device to charge the battery.
LED1 LED2 LED3 LED4 Battery Level
0-49%
50-74%
75-99%
100%

EN
7
Battery Error LED Patterns
The table below shows battery protection mechanisms and corresponding LED patterns.
LED1 LED2 LED3 LED4 Blinking Pattern Battery Exception Item
LED2 blinks twice per
second Overcurrent detected
LED2 blinks three times
per second The battery system is abnormal
LED3 blinks twice per
second Overcharged detected
LED3 blinks three times
per second Charging device over-voltage
LED4 blinks twice per
second Charging temperature is too low
LED4 blinks three times
per second Charging temperature is too high
All 4 LEDs blink fast The battery is abnormal and
unavailable
In the event of charging temperature protection occurring the battery will resume charging once
the temperature has returned to within the allowable range. If one of the other battery protection
mechanisms activates, to resume charging once the issue has been resolved it is necessary to
rst press the Power button to turn the battery o, unplug the battery from the charging device,
and then plug it back in to resume charging.
• DJI does not take any responsibility for damage caused by third-party charging devices.
• DO NOT charge the battery near ammable materials or on ammable surfaces such as
carpet or wood. DO NOT leave the battery unattended during charging. There should
be a distance of at least 30 cm between the battery station and any charging batteries.
Otherwise, the battery station or charging batteries may be damaged by excessive
heating and may even lead to a re hazard.
• DO NOT charge the battery immediately after ight. The battery temperature may be too
high and may cause serious damage to the battery. Allow the battery to cool down to
close to room temperature before charging. Charge the battery at a temperature range
of 0° to 60° C (32° to 140° F). The ideal charging temperature range is 22° to 28° C (72°
to 82° F). Charging at the ideal temperature range can prolong battery life.
• In scenarios that meet the following two conditions simultaneously, the battery can be
charged immediately after ight:
a. The temperature of the ight environment was below 30° C.
b.The temperature of the charging environment is below 30° C and there is no direct
sunlight.
• DO NOT charge the battery near heat sources such as a furnace or heater.
• Regularly check the terminals and battery ports. DO NOT clean the battery using alcohol
or other inammable liquid. DO NOT use a damaged battery station.
• Keep the battery dry at all times.

EN
8
• The battery stops charging when charging is complete. It is recommended to disconnect
the battery once charging is complete.
• Make sure the battery is powered o before charging. Otherwise, the battery ports may
be damaged.
Battery Storage
Disconnect the battery from the aircraft and check if there is any buildup in the battery port.
• Power o and disconnect the battery from the aircraft during transportation.
• Keep batteries out of the reach of children and animals. Seek professional medical
support immediately if children swallow parts of the battery.
• If the battery level is critically low, charge the battery to a power level of 40% to 60%.
DO NOT store a battery with a low power level for an extended period. Otherwise, the
performance will be negatively aected.
• DO NOT leave the battery near heat sources such as a furnace or heater. DO NOT leave
the battery inside a vehicle on hot days.
• The battery must be stored in a dry environment.
• DO NOT place the battery near explosive or hazardous material or near metal objects
such as eyeglasses, watches, jewelry, and hairpins.
• DO NOT attempt to transport a battery that is damaged or has more than 30% power.
Discharge the battery to 30% or lower before transportation.
• Make sure the battery is placed on a at surface.
• If storing the battery for more than three months, it is recommended to store the battery
in a battery safety bag in an environment at a temperature range from -20° to 40° C (-4°
to 104° F).
• DO NOT store the battery for an extended period after fully discharging. Doing so may
over-discharge the battery and cause irreparable damage to the battery cell.
• If a battery with a low power level has been stored for an extended period, the battery
will be in deep hibernation mode. Charge to wake the battery.
• Disconnect the battery from the aircraft if you intend to store the battery for an extended period.
Battery Disposal
• Before disposing, make sure to soak the battery in water for 24 hours to completely
discharge the battery. Dispose of the battery in specic recycling boxes. DO NOT place
the battery in regular waste containers. Strictly follow your local regulations regarding the
disposal and recycling of batteries.
• If the battery cannot be discharged completely, DO NOT dispose of the battery in a battery
recycling box directly. Contact a professional battery recycle company for assistance.

EN
9
Battery Maintenance
• DO NOT splash the battery with water. An excessive amount of water will damage the battery.
• DO NOT store the battery when the temperature is outside the range of -20° to 45° C (-4°
to 113° F).
• If the battery is not used for an extended period, the battery life may be reduced.
• Fully charge and discharge the battery at least once every three months to ensure the
performance of the battery.
• If a battery has not been charged or discharged for ve months or more, the battery will
no longer be covered by the warranty.
Specications
Specifications T30 Intelligent Flight Battery
(BAX501-29000mAh-51.8V) T10 Intelligent Flight Battery
(BAX501-9500-51.8)
Nominal Voltage 51.8 V
Battery Type Lithium Battery 14S
Discharge Rate 11.5 C
Operating Temperature Range -5° C to 45° C (23° F to 113° F)
Charging Temperature Range 0° C to 60° C (32° F to 113° F)
Warranty Details 1,000 charge cycles or 12 months (whichever is sooner)
IP Rating IP54 + Board-level potting protection
Compatible Aircraft DJI Agras T30 DJI Agras T10
Compatible Charging Device
T30 Intelligent Battery
Station, D9000i Multifunction
Inverter Generator
T10 Intelligent Battery Station,
D4500i Multifunction Inverter
Generator
Capacity 29000 mAh 9500 mAh
Energy 1502 Wh 430 Wh
Max Charging Power 7200 W 3600 W
Battery Charging Time*
9-12 mins when the battery
station is connected with
two AC power cables;
18-25 mins when the battery
station is connected with
one AC power cable
7-10 mins
Weight Approx. 10.2 kg Approx. 3.8 kg
* Tested in a lab environment at a temperature of 25° C (77° F) using a T30/T10 Intelligent
Battery Station.

10
CHT
簡 介
T30/T10 智能飛行電池分別適用於 T30/T10 植保無人飛機,金屬外殼和矽膠保護套可有效保
護電池。電池採用全新的高能量密度電芯和先進的電池管理系統,為植保無人飛機提供充沛電力。
T30 智能飛行電池容量為 29000 mAh,T10 智能飛行電池容量為 9500 mAh,標準電壓均為
51.8 V。
以下內容以 T10 智能飛行電池為例進行說明。
123
4
5 6
注意: 如果操作時未按照說明進行,可能會導致財產損失和輕微傷害。
警告: 如果操作時未按照說明進行,可能會導致財產損失、重大事故和嚴重傷害。
本產品較為複雜,需要經過一段時間熟悉後才能安全使用,並且需要具備一些專業知識後才能
進行操作。如果沒有強烈的安全意識,不恰當的操作可能會導致產品損壞和財產損失,甚至對
自身或他人造成嚴重傷害。本產品嚴禁十八周歲以下人士使用。切勿使用非官方提供或建議的
零組件,必須嚴格遵守官方的指南安裝和使用產品。本說明檔案包含安全、操作和維護等說明。
在進行組裝、設定和使用之前,務必仔細閱讀本說明中的所有說明和警告。
閱讀提示
針對操作不當可能帶來的潛在危險,本產品使用以下詞彙予以分級並加以說明。
免責聲明
感謝您購買大疆 TM 創新(DJI TM)產品。使用本産品之前,請仔細閱讀並遵循本文及大疆創新
(DJI)提供的所有安全與法規操作指引,否則可能會為您和周圍的人員帶來傷害、損壞本産品
或其它周圍物品。一旦使用本産品,即視為您已經仔細閱讀本文件,理解、認可和接受本文件
及本産品所有相關文件的全部條款和內容。您承諾僅出於正當目的使用本產品。您承諾對使用
本產品及其可能帶來的後果負全部責任。大疆創新(DJI)對於直接或間接使用本產品而造成的
損壞、傷害及其任何法律責任概不負責。
DJI 是深圳市大疆創新科技有限公司及其附屬公司的商標。本文出現的産品名稱、品牌等,均
為其所屬公司的商標或註冊商標。本產品及手冊之版權為大疆創新所有。未經許可,不得以任
何形式複製翻印。
本文件及本產品所有相關文件的最終解釋權歸大疆創新(DJI)所有。如有更新,恕不另行通知。
請前往 www.dji.com 官方網站以取得最新的產品資訊。

11
CHT
1. 電源按鈕
短按可查看電池電量。短按加長按可打開電池。請務必在電池插入植保無人飛機後再開啟電
池電源,以及電源關閉後再將電池從植保無人飛機上取下,否則可能導致無人飛機和電池連
接埠損壞。
2. LED指示燈
電池電量指示燈。如圖示從左到右分別為 LED1、LED2、LED3 和 LED4。
3. 把手
可透過把手提起電池。
4. 植保無人飛機固定卡扣
此卡扣可將電池固定在植保無人飛機,務必確認電池已透過此卡扣牢固固定於植保無人飛機。
從植保無人機上取下該電池時,需按下此卡扣。
5. 電源連接埠
連接至植保無人飛機、智能充電管家或全能變頻充電站。
6. 矽膠保護套
可保護電池。
電池功能
T30/T10 智能飛行電池具有以下功能:
1. 電量顯示:電池內建指示燈,短按電池開關可查看目前電池電量。
2. 智能通訊:透過電池上的電源連接埠可即時獲得電池資訊,例如電壓、電量等資訊,確保植
保無人飛機能正常工作。
3. 異常使用記錄:管理系統具有異常記錄功能,可記錄高低溫充放電、充電電流過大、放電電
流過大、長時間高電量存放等訊息。
4. 充電異常提示:在充電過程中出現異常,可根據指示燈提示將電池靜置,待電池進行自我修復,
詳見異常指示表。
5. 自動均衡功能:當電池達到一定條件後,電池將自動開啟均衡功能,確保電池內電芯動態平衡。
6. 自動放電功能:電池具有自放電功能,當電池滿電超過 1 天,電池將會自動放電至 97% 左右;
超過 7 天,將會自動放電至 60% 左右進行存放。
7. 自動調節電流與分段保護功能:使用官方充電管家充電時,可根據目前電芯溫度智能調節充
電電流。此外,電池也會根據溫度進行自我保護。
8. 熱平衡管理功能:電池具有熱平衡管理功能,將電芯之間的溫度差控制在誤差範圍內且相等。
•使用電池前請詳細閱讀並嚴格遵守電池表面貼紙上的要求。若未按要求使用,後果將由
使用者自行承擔。
•對於非正常使用導致產生異常記錄的電池將不予保固。

12
CHT
使用電池
電池正確連接至植保無人飛機後,先短按再長按電源按鈕可開啟電池。飛行結束並停槳後,請
先短按再長按關閉電池電源,然後斷開電池與植保無人飛機的連接。
•禁止將電池放在靠近熱源的地方,例如陽光直射處、炎熱高溫的車內、火源或電暖器附近。
•嚴禁讓電池接觸任何液體,請勿將電池浸入水中或將其弄濕。切勿在雨中或潮濕的環境
中使用電池。電池內部接觸到水後可能會發生分解反應,導致電池自燃,甚至可能引發
爆炸。
•嚴禁使用膨脹、漏液、包裝破損的電池。如發生以上情況,請聯絡代理商做進一步處理。
•在安裝電池或者從植保無人飛機拔出電池之前,請保持電池的電源關閉。請勿在電池電
源打開的狀態下安裝或拆卸電池,否則可能損壞電源連接埠。
•電池應在環境溫度為 -5℃ 至 45℃ 之間使用。溫度過高 ( 高於 50℃ ) 可能會引起電池
著火,甚至爆炸。溫度過低 ( 低於 -5℃ ),電池性能將會嚴重下降,無法符合正常使用
要求。恢復常溫後即可正常使用。
•禁止在強大的靜電或電磁場環境中使用電池。否則可能導致電池保護板異常,從而導致
植保無人飛機發生嚴重故障。
•禁止以任何方式拆解或用尖銳物體刺破電池。這樣會引起電池起火,甚至爆炸。
•電池內部液體具有強烈腐蝕性,如有漏液狀況,請遠離電池。如果內部液體噴濺到人體
皮膚或眼睛,請立即用清水沖洗乾淨,並立即就醫。
•電池如從植保無人飛機摔落或受外力撞擊,不得再次使用。
•如果電池在植保無人飛機飛行過程中或其它情況下意外掉入水中,請立即拔出電池並將
其置放在安全的空曠區域,這時應遠離電池直到電池完全晾乾。不得再次使用晾乾的電
池,應該按照本文的棄置方法妥善處理。若電池起火,建議按以下順序使用滅火器材:
水或水霧、沙、滅火毯、乾粉、二氧化碳滅火器。
•請勿將電池放置於微波爐或壓力鍋中。
•禁止用導線或其他金屬物體致使電池正負極短路。
•請勿撞擊電池。請勿在電池或充電裝置上放置重物。
•如果電池連接埠髒污,請用乾布擦拭乾淨。否則會造成接觸不良,進而引起能量損耗或
無法充電。
•請避免在電池電量低於 15% 的情況下繼續飛行,否則會造成電池損壞或引發飛行事故。
•禁止反接電池正負極,否則電池異常充電可能會導致過熱、爆炸或起火。嚴禁使用非官
方推薦的電池。如需更換,請聯繫售後服務或是指定代理商。因使用非官方提供的電池
而引發的電池事故、飛行故障,由使用者承擔。
•拿取電池時,請務必握住電池把手。
•放置電池時需要確認地面平整,防止尖銳物品戳壞電池底部。
•電池屬於危險物品。禁止在電池上堆放其他物品,或將電池以及含有電池的包裝當坐墊
使用,否則可能導致電池損壞,甚至發生危險。
•電池較重,請小心放置,以防電池傾倒,導致電池側面損壞。若發生電池傾倒並損壞的
情況,請立即將電池放置於開闊區域,遠離可燃物及人群。待半小時後,將電池於水中
浸泡 24 小時以上。確保電池電量已完全耗盡後才可進行報廢處理。

13
CHT
•每次飛行之前,確保電池充滿電。
•若植保無人飛機進入低電量警告模式,應盡快降落並停止飛行,更換電池。
•在低溫環境下,建議在飛行前將電池預熱至 5℃ 以上,預熱至 20℃ 更佳。
LED 顯示狀態
電量指示燈可用於顯示電池充放電過程中的電量以及狀態,指示燈定義如下:
表示 LED 燈在指示過程中恆亮 表示 LED 燈在指示過程中有規律地閃亮
表示 LED 燈熄滅
查看電量
在電池休眠狀態下,短按電源按鈕即可查看目前電量。
電量指示燈
LED1 LED2 LED3 LED4 目前電量
88%~100%
75%~87%
63%~74%
50%~62%
38%~49%
25%~37%
13%~24%
0%~12%
充電狀態
電池在充電時,LED 燈將逐漸閃爍提示充電狀態。充電完畢後請斷開和充電裝置的連接。請務
必使用官方推薦的充電裝置為電池充電。
充電指示燈
LED1 LED2 LED3 LED4 目前電池電量
0%~49%
50%~74%
75%~99%
100%

14
CHT
異常指示表
電池 LED 燈可顯示由於充電異常而觸發的電池保護相關資訊。
異常指示燈
LED1 LED2 LED3 LED4 顯示規則 保護項目
LED2 每秒閃 2 次 充電電流過大
LED2 每秒閃 3 次 電池系統異常
LED3 每秒閃 2 次 過度充電導致電池電壓過高
LED3 每秒閃 3 次 充電裝置電壓過高
LED4 每秒閃 2 次 充電溫度過低
LED4 每秒閃 3 次 充電溫度過高
四個 LED 燈快速閃爍 電池異常,不可使用
排除故障 ( 充電電流過大、充電短路、過度充電導致電池電壓過高、充電裝置電壓過高、充電
溫度過高或過低)後,請按下電池開關取消 LED 燈保護提示,重新拔插充電裝置恢復充電。如
發生充電溫度異常,等待充電溫度恢復正常之後,電池將會自動恢復充電,因此無需重新拔下
再插上充電裝置。
•智能飛行電池必須使用 DJI 官方指定的專用充電裝置進行充電,對於使用非 DJI 官方
提供的充電裝置進行充電所造成的一切後果,DJI 概不負責。
•充電時,請將電池和充電裝置放置在水泥等周圍無易燃、可燃物的地面。電池充電時
請在場監看,以防止意外發生。為保證充電安全,充電時,電池與充電管家、電池與
電池之間的距離需大於 30 cm,以免因為發熱集中而導致充電管家或電池故障,甚至
造成火災等嚴重後果。
•植保無人飛機飛行結束後,電池會處於高溫狀態,建議等電池降至室溫後再進行充電,
否則可能出現禁止充電的情況。電池的可充電環境溫度為 0℃ 至 60℃,在理想的充電
環境溫度(22℃ 至 28℃)充電,可大幅延長電池的使用壽命。
•在同時滿足如下 2 個條件的場景中,電池可執行落地即充,即飛行結束後可直接為電
池充電:
a. 植保無人飛機作業環境溫度在 30℃ 以下。
b. 充電環境溫度在 30℃ 以下且無陽光直射。
•禁止在靠近熱源的地方為電池進行充電,比如陽光直射處或炎熱的車內、火源或電暖器。
•經常檢查電池連接埠、插頭等各個零組件。請勿使用酒精或者其他可燃性液體清潔充
電裝置。請勿使用已損壞的充電裝置。
•確保電池在乾燥狀態下進行充電。
•電池在充飽電時將自動停止充電。建議在電池充飽電之後,斷開與充電裝置的連線。
•充電前,請將電池電源保持在關閉狀態,否則可能損壞電源連接埠。

15
CHT
電池存放與運輸
每次使用完畢,斷開植保無人飛機與電池的連接後,請檢查電池電源連接埠是否有雜物,若有,
請及時清理。
•運輸時,請確保關閉電池電源,並斷開電池與無人飛機或其它裝置的連接。
•請將電池存放在兒童碰觸不到的地方。如果兒童不小心吞入零件,應立即送醫。
•如果使用結束後電池提示嚴重低電量,需充電到 40% 至 60% 存放。否則長時間存放
可能導致電池損壞。
•禁止將電池放在靠近熱源的地方,例如陽光直射處、炎熱的車內、火源或電暖器附近。
•存放電池的環境應保持乾燥。請勿將電池置於水中或可能漏水的地方。
•禁止將電池與金屬物體(如眼鏡、手錶、金屬項鍊、髮夾等)或易燃易爆品一起存放
或運輸。
•請勿運輸破損或電池電量高於 30% 的電池。運輸前請將電池放電至 30% 以下。
•放置電池時需要確認地面平整,防止尖銳物品戳壞電池底部。
•若長期(超過 3 個月)存放電池,則必須置於溫度為 -20 至 40℃ 的環境中,並建議
使用電池專用安全袋存放電池。
•請勿將電池完全放電後長時間存放,以免電池進入過度放電狀態,這樣容易造成電芯
損壞而無法恢復使用。
•若電池電量嚴重不足且閒置時間過長,則電池將進入深度睡眠模式,如需將電池從深
度睡眠中喚醒,需幫電池充電。
•若需要長期存放則需將電池與植保無人飛機的連接斷開。
棄 置
•務必將電池於水中浸泡 24 小時以上,確保電池已徹底放完電後,才將電池放置於指
定的電池回收箱中。電池是危險化學品,嚴禁棄置於一般垃圾箱。相關細節,請遵循
當地電池回收和棄置的法律規定。
•如電池因為電源開關無法作用而無法完成徹底放電,請勿將電池直接棄置於電池回收
箱,應聯絡專業電池回收公司做進一步處理。
保 養
•請勿用水清洗電池。
•請勿將電池存放在室溫超過 45℃ 或低於 -20℃ 的環境。
•若電池長時間閒置,會對其性能造成影響。
•請每 3 個月左右重新充放電一次,以保持電池活性。
•超過 5 個月未進行維護(充放電)的電池將不予以保固。

16
CHT
技術參數
參數 T30 智能飛行電池
(BAX501-29000mAh-51.8V)
T10 智能飛行電池
(BAX501-9500-51.8)
標準電壓 51.8 V
電池類型 鋰電池 14S
放電倍率 11.5 C
運作環境溫度 -5℃ 至 45℃
充電溫度範圍 0℃ 至 60℃
保固使用時間限制 1000 次循環或 12 個月(以先到為準)
防護等級 IP54+ 板級灌封防護
適用植保無人飛機 T30 植保無人飛機 T10 植保無人飛機
適用充電裝置 T30 智能充電管家、D9000i 全能變
頻充電站
T10 智 能 充 電 管 家、D4500i
全能變頻充電站
容量 29000 mAh 9500 mAh
能量 1502 Wh 430 Wh
最大充電功率 7200 W 3600 W
每顆電池充滿時間 *
充電管家連接兩條 AC 電源線時:
9-12 分鍾
充電管家連接一條 AC 電源線時:
18-25 分鍾
7-10 分鍾
重量 約 10.2 kg 約 3.8 kg
* 充電時間為使用官方充電管家於環境溫度 25℃ 下測得。

17
JP
免責事項
DJITM 製品をご購入いただきましてありがとうございます。ご使用前に、この文書全体に目を
通し、DJI が提供する安全で合法的な使用方法に関する説明を注意深くお読みください。指示
と警告に従わなかった場合、ご自身や他の人に重傷を負わせたり、またはお客様の DJI 製品お
よび周辺の他の物の破損につながる恐れがあります。本製品を使用することにより、本書を
よく読み、本文書および本製品のすべての関連文書に記載されている利用規約を理解し、順
守することに同意したとみなされます。本製品を適切な目的のためにのみ使用することに同
意するものとします。本製品の使用中の行動とこれに伴う結果には、ユーザーが全面的に責
任を負うことに同意するものとします。本製品の使用により直接または間接的に発生する損
害、傷害、およびその他法的責任に対して、DJI は一切責任を負いません。
DJI は、SZ DJI TECHNOLOGY CO., LTD.(以下「DJI」と省略)およびその関連会社の商標です。
本書に記載されている製品、ブランドなどの名称は、その所有者である各社の商標または登
録商標です。本製品および本書は、不許複製 • 禁無断転載を原則とする DJI の著作物のため、
DJI から書面による事前承認または許諾を得ることなく、本製品または文書のいかなる部分も、
いかなる方法によっても複製することは固く禁じられています。
本書およびその他すべての付属書は、DJI 独自の裁量で変更されることがあります。最新の製
品情報については、www.dji.com にアクセスして、本製品に対応する製品ページをクリック
してご覧ください。
この文書は複数の言語で提供されています。言語版によって相違がある場合には、英語版が
優先されます。
ご使用の前にお読みください
本書および製品の警告ラベルでは以下の用語を使用し、製品操作時に起こりうる危険のレベルを示し
ています。
注意:手順を正しく実行しないと、物的損害が発生する可能性があるとともに、軽微な負傷
をする可能性があります。
警告:手順を正しく実行しないと、物的損害、巻き添え事故、人的な重大事故が発生する可
能性があるほか、高い確率で軽傷を負うことが予想されます。
本製品は、専門知識を身につけたユーザーが慎重に操作する必要があります。本製品を安全かつ責任
を持って操作しないと、傷害や本製品またはその他の財産の損害を招くおそれがあります。本製品は、
18 才未満の方が使用することを想定していません。いかなる場合も、本製品を改造したり、互換性
のない部品と併用したりしないでください。本書には、安全、操作、メンテナンスの説明が記載され
ています。本製品を正しく操作し、損害や重傷を避けるためには、組み立て、設定、使用の前に、本
書に記載されている指示と警告をすべて読み、これに従うことが重要です。

18
JP
はじめに
T30 インテリジェント フライトバッテリーは DJI AGRAS™ T30 で使用し、公称電圧 51.8 V で、
容量が 29000 mAh です。一方 T10 インテリジェント フライトバッテリー DJI Agras T10 で使
用し、同じ電圧で、容量が 9500 mAh です。金属シェルとゴムキャップがバッテリーを効果
的に保護し、高容量バッテリーセルと高度な電源管理システムにより機体に長時間の電力供
給が可能となります。
以下の例では T10 インテリジェント フライトバッテリーを使用しています。
123
4
5 6
1. 電源ボタン
ボタンを押すと、バッテリー残量を確認できます。ボタンを 1 回押し、もう 1 回長押しす
ると、バッテリーの電源が入ります。バッテリーが機体に接続されているときにのみ、バ
ッテリーの電源をオン / オフしてください。それ以外の場合にこの動作を行うと、バッテ
リーの電源ポートや機体が損傷します。
2. ステータス LED
バッテリー残量を示します。左から右に:LED1、LED2、LED3、LED4。
3. ハンドル
ハンドルを使用して、バッテリーを運びます。
4. クランプ
クランプを使用して、バッテリーを機体にしっかりと取り付けます。クランプを押すと、
バッテリーを機体から取り外します。
5. 電源ポート
機体、バッテリーステーション、または多機能インバータージェネレーターを接続します。
6. ゴムキャップ
バッテリーを保護します。

19
JP
バッテリーの機能
1. バッテリー残量表示:ステータス LED は、現在のバッテリー残量を示します。確認するに
は、電源ボタンを押します。
2. 通信:電圧やバッテリー残量などのバッテリーのパラメーターが機体に送信され、バッテ
リーのパラメーターが変化したとき、機体が適切な動作をおこなえるようにします。
3. 充電エラー検知:充電中に発生するエラーは、ステータス LED で示されます。エラーが発
生したら、バッテリーを取り外し、自動的にエラーが修正されるのを待ってください。詳
しくは「LED パターン」の項を参照してください。
4. バッテリーエラー記録:バッテリーは、過充電または過放電、充放電時の温度範囲の超過、
バッテリー残量が推奨範囲外の状態での長期保管などのエラーを記録します。トラブルシ
ューティングや修理の際には、DJI の正規代理店がバッテリーエラーの記録にアクセスで
きます。
5. 自動バランス調整:特定の状況では、バッテリーセルの電圧が自動でバランス調整されま
す。
6. 自動放電:1 日以上バッテリーのフル充電状態が維持されると自動的にバッテリー残量が
97% まで放電されます。7 日後には、バッテリーは自動的に 60% まで放電されます。
7. 自動電流調整:付属のバッテリーステーションと一緒に使用すると、バッテリーは、バッ
テリーセルの温度に基づいて充電電流をスマートに調整します。バッテリーには環境温度
に基づいた自己保護機能もサポートされています。
8. 温度制御:バッテリーは、バッテリーセル間の温度差が同じであり、許容温度範囲内に留
まるよう徹底されています。
• 初めて使用する前に、バッテリーのラベルに記載されている安全要件を参照してく
ださい。ラベルに記載されている安全要件に反する行為をユーザーが行った場合、
いかなる場合も弊社は一切の責任を負いかねます。
• バッテリーの誤使用によりバッテリーエラーが発生した場合、製品保証は無効とな
ります。
バッテリーの使用
バッテリーが機体に接続されたら、電源ボタンを 1 回押し、もう 1 回長押しすると、バッテ
リーの電源が入ります。機体が着陸しモーターが停止したら、電源ボタンを 1 回押した後、
長押しすると、バッテリーの電源が切れます。その後バッテリーを機体から取り外してくだ
さい。
• 暖炉やヒーターなどの熱源の近くでバッテリーを使用したり放置したりしないでくだ
さい。暑い日にバッテリーを車内に放置しないでください。
• バッテリーは液体類に触れないようにしてください。バッテリーを湿気のある場所に
放置しないでください。また、湿度の高い環境でバッテリーを使用しないでください。
バッテリーが腐食し、発火または爆発する可能性があります。
Other manuals for AGRAS T30
6
This manual suits for next models
1
Table of contents
Languages:
Other dji Camera Accessories manuals