DOGA gy30n User manual

Instructions manual / Position Controller
1
GY Series
INSTRUCTIONS MANUAL

Instructions manual / GY Series
2
I
IM MP PO OR RT TA AN NT T
The tool delivered with this manual may been modified for specific needs.
In that case, please give us the tool code number written on our shipping note or the appoximate tool delivery date when
you will place an order for a new similar tool or for spare parts.
In that way, you will be sure to get the required and/or spare part.
W
WA AR RN NI IN NG G
This informations has to be kept in a location known all users.
Each operator has to read carrefully this manual before installing, using, and
mending the product.
Be sure that the operator has understood using recommendations and the meaning of signs put on the product.
Most accidents could be avoided respecting this Manual Instructions. As a matter of fact, they were created according to
European laws and norms regarding products.
In each case, please respect and follow safety national norms. Do not take off nor damage the stickers or advise put on
the product and above all the details imposed by the law.

Instructions manual / GY Series
3
INDEX
1. Features………………………………………………………………………………………………………….p.4
2. Screwdriver specification………………………………………………………………………………………p.5
3. Controller specification…………………………………………………………………………………………p.7
4. Operation………………………………………………………………………………………………………...p.8
4.1 Key buttons…………………………………………………………………………………………………….p.8
4.2 Parameter setting…………………………………………………………………………………………….. p.10
4.2.1 Model selecting (P1)………………………………………………………………………………………..p.10
4.2.2 Fastening speed (P2)……………………………………………………………………………………….p.10
4.2.3 Loosing speed (P3)…………………………………………………………………………………………p.10
4.2.4 Soft start (P4)………………………………………………………………………………………………..p.10
4.2.5 Soft start for Reverse (P5)………………………………………………………………………………… p.10
4.2.6 Multi-hit setting (P6)………………………………………………………………………………………...p.11
4.2.7 Mult-sequence (P7)…………………………………………………………………………………………p.11
4.2.8 Multi_1 : First angle in turn (P8)…………………………………………………………………………...p.11
4.2.9 Multi_2 : Second reverse angle for next step of operation (P9)………………………………………..p.11
4.2.10 Multi_3 : Holding time for next step of operation (P9)…………………………………………………p.11
4.2.11 Display setting (P11)………………………………………………………………………………………p.11
4.2.12 External I/O for remote control (P12)……………………………………………………………………p.11
4.2.13 Password setting (P13)…………………………………………………………………………………...p.11
4.2.14 Parameter initialization to factory setting (P14)………………………………………………………...p.12
4.2.15 Firmware version display (P15)…………………………………………………………………………. p.12
5. I/O Details………………………………………………………………………………………………………..p.12
5.1 Port details……………………………………………………………………………………………………..p.12
5.2 I/O interface port details………………………………………………………………………………………p.13
5.3 I/O interface Connection details……………………………………………………………………………..p.13

Instructions manual / GY Series
4

Instructions manual / GY Series
5

Instructions manual / GY Series
6

Instructions manual / GY Series
7

Instructions manual / GY Series
8

Instructions manual / GY Series
9

Instructions manual / GY Series
10