Dometic CK36H401RI Harrier Inverter User manual

Air conditioning roof unit
Installation Manual. . . . . . . . . . . . . . . 3
EN
Dometic
Harrier Inverter

EN
Dometic Harrier Inverter Explanation of symbols
3
Please read this instruction manual carefully before installation and
start-up,and store itin a safe place. If you pass onthe device to another
person, hand over this instruction manual along with it.
Table of contents
1 Explanation of symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 Safety and installation instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3 Target group for this instruction manual . . . . . . . . . . . . . . . . . . . . . . 7
4 Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
6 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
7 Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
8 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
9 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
10 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
11 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
1 Explanation of symbols
D
!
!
A
DANGER!
Safety instruction: Failure to observe this instruction will cause
fatal or serious injury.
WARNING!
Safety instruction: Failure to observe this instruction can cause
fatal or serious injury.
CAUTION!
Safety instruction: Failure to observe this instruction can lead to
injury.
NOTICE!
Failure to observe this instruction can cause material damage and
impair the function of the product.

EN
Safety and installation instructions Dometic Harrier Inverter
4
I
➤Action: This symbol indicates that action is required on your part. The
required action is described step-by-step.
✓This symbol describes the result of an action.
Fig. 15, page 3: This refers to an element in an illustration. In this case,
item 5 in figure 1 on page 3.
2 Safety and installation instructions
Please observe the prescribed safety instructions and stipulations
from the vehicle manufacturer and service workshops.
The manufacturer accepts no liability for damage in the following cases:
Faulty assembly or connection
Damage to the product resulting from mechanical influences and excess
voltage
Alterations to the product without express permission from the manu-
facturer
Use for purposes other than those described in the operating manual
Note the following basic safety information when using electrical devices to
protect against:
Electric shock
Fire hazards
Injury
NOTE
Supplementary information for operating the product.

EN
Dometic Harrier Inverter Safety and installation instructions
5
2.1 Handling the device
!WARNING!
Installation and repair of the roof air conditioner may only be
carried out by qualified personnel who are familiar with the risks
involved and the relevant regulations. Inadequate repairs may
cause serious hazards. For repair service, please contact the
service centre in your country (addresses on the back page).
Electrical devices are not toys.
Keep electrical devices out of reach of children or infirm per-
sons. Do not allow them to use electrical devices without super-
vision.
Persons whose physical, sensory or mental capabilities or
whose lack of experience and knowledge prevent them from
using the device safely should not use it without supervision or
instruction by a responsible person.
Do not undo the upper cover of the roof air conditioner in the
event of a fire. Use approved extinguishing agents instead.
Do not use water to extinguish fires.
!CAUTION!
The roof air conditioner must be installed securely so that it can-
not fall down.
Only operate the roof air conditioner if you are certain that the
housing and the cables are not damaged.
Do not use the roof air conditioner near flammable fluids or in
closed rooms.
Make sure no combustible objects are stored or installed near
the air outlet. A distance of at least 50 cm must be kept.
Do not reach into air outlets or insert any foreign objects in the
device.

EN
Safety and installation instructions Dometic Harrier Inverter
6
ANOTICE!
Only use the device as intended.
The roof air conditioner is not suitable for use in agricultural or
construction vehicles.
Do not make any alterations or conversions to the device.
Never drive through automatic car washes when the roof air
conditioner is mounted.
If faults occur in the refrigerant circuit, the system must be
checked by a specialist company and repaired properly. The
refrigerant must never be released into the air.
INOTE
Please ask your vehicle manufacturer if a technical inspection is
required after fitting an air conditioner and whether the height
entered in the vehicle documents needs to be altered:
– Harrier Series: increased height 255 mm
2.2 Handling electrical cables
!WARNING!
The electrical power supply may only be connected by a
qualified electrician.
!CAUTION!
Fit a fuse of at least 10 A to the connection with the vehicle’s
power supply.
Attach and lay the cables so that they cannot be tripped over or
damaged.
ANOTICE!
Use cable ducts to lay cables through walls with sharp edges.
Do not lay loose or bent cables next to electrically conductive
materials (metal).
Do not pull on the cables.

EN
Dometic Harrier Inverter Target group for this instruction manual
7
3 Target group for this instruction
manual
The instructions in this manual are intended for qualified personnel at
workshops who are familiar with the guidelines and safety precautions to be
applied.
4 Scope of delivery
5 Accessories
Available as accessories (not included in the scope of delivery):
If you have questions in respect of the accessories, please contact your local
service partner.
No. in fig. 1Number Description
1 1 Roof air conditioner
2 1 Roof frame
3 1 Ceiling plate
4 1 ADB cover
5 1 Duct insert
62Airfilter
7 4 Screw hole cover
8 1 Transition duct
9 3 Cable connector
10 4 Long fastening bolt
11 4 Fastening screw
Description
Seal – thicker roof

EN
Intended use Dometic Harrier Inverter
8
6 Intended use
The Dometic Harrier inverter roof air conditioner can condition the interior of
campers and caravans with cool or warm dehumidified air.
The roof air conditioner is not suitable for installation in construction
machines, agricultural machines or similar equipment. It will not work
properly if exposed to strong vibrations.
Do not operate the roof air conditioner if the ambient temperature is above
52 °C.
I
7Labels
Labels are attached to the Dometic Harrier inverter roof air conditioner.
These labels provide the user and fitter with information on specifications of
the device.
A label is applied to the side of the electrical box inside the rooftop unit and
can be read through the side ventilation grille. This label provides details on
the rooftop unit.
Another label is located on the inside of the ADB cover giving details of the
ADB.
NOTE
You can find additional information on roof air conditioners in
the operating manual, such as the technical description or the
controls.

EN
Dometic Harrier Inverter Installation
9
8 Installation
!
8.1 Note on installation
Read this installation manual completely before installing the roof air
conditioner.
The following tips and instructions must be observed while installing the roof
air conditioner:
D
!
A
CAUTION! Beware of injury
The roof air conditioner may only be installed by qualified
personnel. The following information is intended for technicians
who are familiar with the guidelines and safety precautions to be
applied.
DANGER! Danger of electrocution
Disconnect all power supplies when working on the roof air
conditioner.
CAUTION! Beware of injury
Improper installation of the roof air conditioner can result in
irreparable damage to the device and put the safety of the user
at risk.
The manufacturer assumes no liability for malfunctions and for
the safety of the roof air conditioner, especially for injury and/or
damage to property, if the roof air conditioner is not fitted in
accordance with these installation instructions.
Always wear the recommended protective clothing
(e.g. protective goggles, gloves).
NOTICE! Beware of damage
Observe the structural engineering of the vehicle and seal of
all openings made when installing the roof air conditioner.
Check whether the roof of the vehicle is able to support the
weight of a person before climbing onto it. Ask the vehicle
manufacturer about the permissible roof loads.

EN
Installation Dometic Harrier Inverter
10
Note on transport
Always have someone help you carry the roof air conditioner.
Always lift the roof air conditioner to move it and never drag it over the roof
(fig. 2A).
Do not use the rear or side ventilation slots to lift it (fig. 2B).
Note on installation location
Before installing the roof air conditioner, check whether any vehicle com-
ponents could be damaged by the installation of the roof air conditioner
(such as lamps, cupboards, doors).
Before installation, find out (by consulting the manufacturer of the vehicle)
whether the construction is designed for the static weight and the loads of
the air conditioner when the vehicle is in motion. The manufacturer of the
roof air conditioner assumes no liability whatsoever.
The vehicle manufacturer may have already provided points where the
opening for the installation of the roof air conditioner can be made without
any risk of weakening the construction or cutting power cables. If not,
fitment of a roof H-frame may be required. These are available separately.
Select a flat and sufficiently level area at the centre of the vehicle roof
between two longitudinal sections for installation.
The roof inclination of the installation surface may not exceed 10°.
Make sure no combustible objects are stored or installed near the air out-
let. A distance of at least 50 cm should be kept.
Make sure that there are no objects within the vehicle which could
obstruct the attachment of the air outlet unit or the cooled air from flowing
through the swivelling air distribution nozzles.
For safety reasons, note the location of existing wiring harnesses, wires
and other components within the installation area, in particular those
which are not visible, when installing the roof air conditioner (when drilling
or screwing etc.).