Dometic ACCD7 User manual

Dometic auxiliary remote truck air
conditioning systems are designed
to cool or heat the cab and sleeper
without running the truck’s diesel engine,
saving fuel and preserving the environment.
The systems run on 120VAC electricity, which
is supplied by a shorepower connection,
an auxiliary power unit (APU), or a battery-
based system. Models are available in 7,000
BTU/Hr, 10,000 BTU/Hr, and 14,000 BTU/
Hr capacities. Electric heat-strip options
include 1, 1.5, 2, 2.5, 3, and 4 KW, and can
be specified as either single or two-stage.
The system can also be integrated with a
diesel-fuel heater, using the same Dometic
Qt Control/Display (Espar only).
Designed for the harsh trucking
environment, the units are vibration and
corrosion resistant, and are backed
by more than 40 years of mobile air
conditioning experience. A digital
thermostat controls the system and is
ordered separately. The system consists of
separate inside (evaporator) and outside
(condenser) sections connected by flexible
refrigerant lines. Government-approved,
environmentally friendly R-417A refrigerant
(HFC) is used.
The condenser section has a highly
efficient, lightweight, compact, all-aluminum
condenser and a 24VDC cooling fan within
a powder-coated aluminum housing. To
save space and reduce noise, it is mounted
outside, typically under the cab or on the
back of the sleeper.
The inside
evaporator
unit consists of a compressor,
evaporator coil, electric heat
strip, and a blower in an aluminum
enclosure with a deep condensate
drain pan. A cooling-only unit (no heat
strip) is also available. This compact unit is
designed for installation under a bunk, or in
the bottom of a closet or cabinet. An efficient
rotary compressor was selected for its
quiet operation, and the enclosure further
minimizes noise in the sleeper. A built-in
electric heat strip provides heat during cold
weather. The strong squirrel-cage blower
moves the cooled or heated air to one or
more discharge grilles through flexible or
fixed ducts.
The condenser, evaporator, and lineset are
all charged at the factory with the proper
amount of refrigerant. Reuseable quick-
connect fittings are specified so that no
special refrigerant-handling equipment is
required. Wire harnesses are waterproof and
polarized for each plug-and-play installation.
A sleek and attractive cover for the 7,000
BTU Day Cab interior system is available
to provide protection to the unit while
muffling sound for a more comfortable
cab environment. The Dometic Qt Control/
Display can be mounted directly onto the
top of the cover, allowing easy access for
the driver.
Key Benefits
ACC OUTSIDE CONDENSER UNIT
■Rugged polished stainless-steel
enclosure.
■Designed for corrosion and
vibration resistance.
■24VDC cooling fan.
EHC INSIDE EVAPORATOR UNIT
■Compact unit.
■Quiet, powerful squirrel-cage blower.
■Rotary compressor inside sound shield.
■Built-in electric heat strip – optional
diesel-fired heater.
■Digital thermostat control
(sold separately).
■Deep drain pan for condensate removal.
■Polarized plug-and-play waterproof
electrical connections.
■Refrigerant connections are reuseable
quick-connect devices.
Auxiliary Remote Truck
Air Conditioning & Heating Systems
ID: 2317
10,000 BTU/hr
System shown
7,000 BTU
Model and Cover
(Cover #710035065)

Air Out
W
Refrigerant
Connectors
HReturn Air
Filter
L
Condensate Drain
3/8” NPT
Refrigerant
Connectors
L
W
H
Air In
Mounting Holes (Typ. 4)
1/4” (6mm) Dia.
Model ECEQ7* EHCEQ7* ECEQ10 EHCEQ10 EHCEQ10 EHCEQ10 ECEXQ14 EHCEQ14 EHCEQ14 EHCEQ14 EHCEQ14
Cooling
Capacity
(BTU/Hr)
7,000 7,000 10,000 10,000 10,000 10,000 14,000 14,000 14,000 14,000 14,000
Heating
Capacity***
cooling
only
1 kW cooling
only
7500 BTU
Espar
Ready
1.5 kW 2 kW cooling
only
1.5 kW 2.5 kW 2.5 kW
2-stage
4 kW
2-stage
Control smart
digital
smart
digital
smart
digital
smart
digital
smart
digital
smart
digital
smart
digital
smart
digital
smart
digital
smart
digital
smart
digital
Height (in) 11.75 11.75 11.63 11.63 11.63 11.63 11.69 11.69 11.69 11.69 11.69
Width (in) 10.25 10.25 11.12 11.12 11.12 11.12 13 13 13 13 13
Length (in) 19.25 19.25 20.19 20.19 20.19 20.19 22 22 22 22 22
Weight (lbs) 53 53 60 60 62 62 64 65 65 65 65
Cool amps** 7.3 7.3 11.8 11.8 11.8 11.8 14.5 14.5 14.5 14.5 14.5
Heat amps** n/a 8.2 n/a 1.0 13 17 n/a 13 21 11.4 + 10.4 23.2 + 12.1
Refrigerant R-417A n/a R-417A R-417A R-417A R-417A R-417A R-417A R-417A R-417A R-417A
DOMETIC ENVIRONMENTAL CORPORATION
P.O. Box 15299 I Richmond, VA 23227 USA I 804-746-1313 I Fax [phone]
www.dometictruck.com I [e-mail]
UNITED STATES & CANADA SERVICE ONLY:
Weekdays 8:00 am to 5:00 pm (Eastern Time) 804-746-1313
All other times 888-440-4494
ID: 2317 Rev. 20080424
Specification Details
Dealer:
Environmentally
Responsible
NOTES: The system is rated to provide full capacity at 95˚F (35˚C) outside
temperature. Actual performance is affected by factors such as ambient
temperature and humidity, insulation, direct sunlight, and reflected heat.
*Electrical box is separate for all models except for this model where the
electrical box is integral. **Power consumption at 120VAC. ***Other heat
capacities are optional.
Espar-Ready unit is set up to operate the Espar D2 Airtonic Heater. The
heater draws approximately 2.8 amps at 12VDC. 1 kW of electric heat
equals 3,414 BTU/hr.
BTU/Hr 7,000 10,000 14,000
Return Air
(sq in)
80 100 144
Discharge Air
(sq in)
50 60 80
Recommended
Duct Size (in)
5 5 7
Recommended
Duct & Minimum Grill Sizes
DOMETIC • US Patent 7,140,192 • US Patent 7,171,822
US Patent 5899081 • Other Patents Pending
Electrical box can be remotely mounted
up to 2.5 ft. away from inside unit.
Box dimensions are 10.3 ” H x 9”W x 5”D.
Approximate weight is 16 lbs.
Model ACCD7 ACCE10 ACCE14
Cooling
Capacity
(BTU/Hr)
7,000 10,000 14,000
Height (in) 6.125 6.125 6.625
Width (in) 11.3125 12.5 12.5
Length (in) 21.875 24.5 24.5
Weight (lbs) 10 12 13
Cool amps** n/a n/a n/a
Heat amps** n/a n/a n/a
Refrigerant R-417A R-417A R-417A
INTERNAL UNIT - EVAPORATOR/HEATER/COMPRESSOR
EXTERNAL UNIT - CONDENSER
Air Out
W
Refrigerant
Connectors
HReturn Air
Filter
L
Condensate Drain
3/8” NPT
Refrigerant
Connectors
L
W
H
Air In
Mounting Holes (Typ. 4)
1/4” (6mm) Dia.