Donco V-133-3 User manual

V-133-3 MISSION CAPTAINS
TRUNDLE BUNK BED
ASSEMBLY INSTRUCTIONS
SIZE OF MATTRESS AND FOUNDATION (SUPPORT)
This bed is designed to use a twin mattress ( 37 ½”- 38 ½”x 74 - 75”) and bunkie board (37 ½"x 74”).The
total thickness must not exceed 9” inchess. Do not use mattress without the proper bunkie board of safe
foundation.
Note:There must be at least 5” inches from top surface
of
mattress to top edge or guardrails.
Thank you for purchasing this quality product.
Be sure to check all packing material carefully
for small parts which may have come loose
inside the carton during shipment. Separate,
identify and count all parts and hardware.
Compare with the parts list to be sure all parts
are present.
“DO NOT TIGHTEN SCREWS
UNTIL COMPLETELY ASSEMBLED”
REPLACEMENT PARTS.
Replacement parts, including additional guard rails, may be obtained from place of purchase or original
distribution.
SAFETY WARNINGS!
1- Follow the information on the warning label appearing on the upper bunk end structure and on the carton. Do
not remove warning label from bed.
2-Always use the recommended size mattress or mattress support, or both, to help prevent the likelihood
of entrapment or falls.
3- Surface of mattress must be at least 5 inchess below the upper edge of guardrails.
4- Do not allow children under 6 years of age to use the upper bunk.
5- Prohibit more than one person on upper bunk.
6- Periodically check and ensure that the guardrail, ladder and other components are in their proper posi-
tion, free from damage, and that all connectors are tight.
7- Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8-Always use the ladder for enterning and leaving the upper bunk.
9- Do not use substitute parts. Contact manufacturer or dealer for replacement parts.
10- Use of a night light may provide added safety precaution for a child using the upper bunk.
11- If the bunk bed will be placed next to a wall, the guardrails that runs the full length of the bed should
be placed against the wall to prevent entrapment between the bed and the wall.
12-Always use guard rails on both long sides of the upper bunk.
13-The use of water or sleep flotation mattresses is prohibited.
14-Keep these instructions for future reference.
15-Strangulation Hazard - Never attach or hang items to any part of the bunk bed that are not designed for
use with the bed: for example, but not limited to, hooks, belts, and jump ropes, etc.
IMPORTANT: PLEASE READ INSTRUCTIONS BEFORE STARTING THE ASSEMBLY
nt
Isctions
ructions ru
TO OBTAIN PARTS, PLEASE CONTACT: DONCO TRADING COMPANY - FORT WORTH, TEXAS
All manuals and user guides at all-guides.com
all-guides.com

V-133-3 MISSION CAPTAINS
TRUNDLE BUNK BED
ASSEMBLY INSTRUCTIONS
Thank you for purchasing this quality product. Be sure to check all packing
material carefully for small parts which may have come loose inside the
carton during shipment. Separate, identify and count all parts and hardware.
Compare with the parts list to be sure all parts are present.
“DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED”
IMPORTANT:
PLEASE READ INSTRUCTION BEFORE STARTING THE ASSEMBLY
* Use of power tool to assemble this
product will invalidate any claim and
damage this product making unsafe !!!
* Please assemble on a clean soft
surface to avoid damage.
!
+
2:00 h
Tools Required
(Not includ)
(Not includ)
All manuals and user guides at all-guides.com

E
Qty
L
Qty
C
Qty
A
G
J
Qty
DQty
Qty
BHalf Moon
1/4"
I
H
K
Qty
Hex Screwdriver
Qty
Qty F
Qty Qty
16 24
1/4”X80 7,0X50
16
4,0X30
01
124
04
10X100
36
3,5X16 10X40
06
8X25
34
4,0X50
32 02
Qty
04
Identifying the Hardware/part list- Identify the hardware using the illustrations below.
Part List: V-133-3 MISSION CAPTAINS TRUNDLE BUNK BED
Qty
M12
3,5X20
Qty
N12
10X10
Qty
O02
WOOD SPACER
Qty
P06
DRAWER STOP
3x
RQty
06
6x20
Q
All manuals and user guides at all-guides.com

01
E
E
E
E
E
E
E
E
E
E
10 04
H
H
H
H
H
H
E
E
E
E
E
E
06 04
H
H
H
H
H
H
TOP
01.1
BOTTOM
H
X6
H
S
STP
E
X4
H
H
ADAI
GURRS
L
X4
H
H
SIDERI
AS
L
X1
JJ
JJ
J
J
J
J
J
J
3x
E
E
Qty
H28
10X40
Qty
J22
8X25
Qty
E06
4,0X30
H
01.2
All manuals and user guides at all-guides.com

02
03
Qty
F
Qty
G
IQty
Hex Screwdriver
08
3,5X16
01 04
Qty
C12
7,0X50
I
I
A
A
A
A
A
A
A
AI
I
B
B
B
Half Moon
Qty
08
01
Qty
1/4x80 Screw
AQty
08
B1/4"
Hex Screwdriver
I
I
C
C
G
G
G
C
C
CC
C
I
I
I
I
II
I
I
G
F
F
BOTTOM BED
LADDER
All manuals and user guides at all-guides.com

E
E
E
E
E
E
E
E
E
E
E
E
04
E08
Qty
4,0X30 Screw
E
E
E
E
E
E
E
E
E
The first slats must be fixed
here at 3” from each headboard end.
R
R
05.1
RQty
06
6x20
TOP FRONT DRAWERS !
3X
TRUNDLE
E
ATTNTION!
TSLFETEE
HE 3 MA LER FRONT DRAWERS MUST BE IXED IN TH RUNDL FRAM !
05
E12
Qty
4,0X30 Screw
All manuals and user guides at all-guides.com
all-guides.com

E
E
E
K
K
K
E
E
E
E
E
K03
Qty
E12
Qty
4,0X30 Screw
Q
Qty
G3,5X16 16
Qty
J8X25 04
J
J
J
J
G
G
G
G
Q
05.2 05.3
05.4
C
I
E
E
E
L
L
E03
Qty
4,0X30 Screw
L02
Qty
4,0X50 Screw
HexScrewdriver 01
Qty
I
7,0x50Screw
C04
Qty
All manuals and user guides at all-guides.com

06 DRAWERS
E24
Qty
4,0X30 Screw
N
N
N
N
O
O
MM
M
M
Qty
N12
10X10
Qty
O02
WOOD SPACER
Qty
M12
3,5X20
06.1
4”
Qty
P
06
Qty
G
DRAWER STOP
06
3,5X16
06.2
G
4”
BC
AK
P
P
G
E
E
15
Qty
4,0X30 Screw
8X25 Wood Dowel 06
Qty
J
J
K
03
Qty
K
06.3
3x
3x
All manuals and user guides at all-guides.com

!
E08
Qty
4,0X30 Screw
07
09
E
E
E
E
E
E
E
E
E
08
All manuals and user guides at all-guides.com

The first slats must be fixed
E
E08
Qty
4,0X30 Screw
10
B
B
B
A
A
A
A
A
A
A
A
C
C
C
C
C
C
C
C
I
I
I
I
I
I
I
I
Qty
BHalf Moon
1/4" 08
Qty
C08
7,0X50
Qty
A08
1/4”X80
IQty
HexScrew driver 01
TOP BED
E
E
E
E
E
E
E
E
11
here at 3” from each headboard end.
All manuals and user guides at all-guides.com

E
23
D
D
12
D
04
DQty
10x100 WoodDowel
E12
Qty
4,0X30 Screw
D
D
D
E
23
E
23
E
23
13
All manuals and user guides at all-guides.com
all-guides.com

14
3,5x16
G04
Qty
n
Ist ct o
is
n
u
r
In t
sio
t
cs
n
ru
G
All manuals and user guides at all-guides.com