Thank you for purchasing this quality product.
Be sure to check all packing materials carefully
for small parts which may have come loose in-
side the carton during shipment. Separate,
identify and count all parts and hardware.Com-
pare with the parts list to be sure all parts are
present.
´´DO NOT TIGHTEN SCREWS
UNTIL COMPLETELY ASSEMBLED´´
SAFETY WARNINGS!
1- Follow the information on the warning label appearing on the upper bunk end structure and on the carton. Do
not remove warning label from bed.
2- Always use the recommended size mattress or mattress support, or both, to help prevent the likelihood
of entrapment or falls.
3- Surface of mattress must be at least 5 inchess below the upper edge of guardrails.
4- Do not allow children under 6 years of age to use the upper bunk.
5- Prohibit more than one person on upper bunk.
6- Periodically check and ensure that the guardrail, ladder and other components are in their proper posi-
tion, free from damage, and that all connectors are tight.
7- Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8- Always use the ladder for entering and leaving the upper bunk.
9- Do not use substitute parts. Contact distributor or dealer for replacement parts.
10- Use of a night light may provide added safety precaution for a child using the upper bunk.
11- If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed should
be placed against the wall to prevent entrapment between the bed and the wall.
12-Always use guardrails on both long sides of the upper bunk.
13-The use of water or sleep flotation mattresses is prohibited.
14-Keep these instructions for future reference.
15-Strangulation Hazard - Never attach or hang items to any part of the bunk bed that are not designed for
use with the bed: for example, but not limited to, hooks, belts, and jump ropes, etc.
IMPORTANT: PLEASE READ INSTRUCTIONS BEFORE STARTING THE ASSEMBLY
In t
s ctio s
u n
r
st ctions
ru
ASSEMBLY INSTRUCTIONS
SIZE OF MATTRESS AND FOUNDATION (SUPPORT)
total thickness must not exceed inchess. Do not use mattress without the proper bunkie board of safe9 "
foundation.
Note: There must be at least inches from top surface of mattress to top edge or guardrails.5 "
TO OBTAIN PARTS, PLEASE CONTACT:
This bed is designed to use a twin mattress ( 37 ½´´- 38 ½´´ x 74 - 75´´) and bunkie board (37 ½´´x 74´´). The
REPLACEMENT PARTS.
Replacement parts, including additional guardrails, may be obtained from place of purchase or original
distributor.
TWIN TWIN BUNK BED # 210
DONCO TRADING COMPANY - FORT WORTH,TEXAS
