Dorel Asia DA7752 User manual

DA7752
WHITE
MOCHA
TODDLER BED
0-65857-17412-0
WHITE
0-65857-17602-5
MOCHA
FUTURE REFERENCE.
LOT NUMBER:
(TAKEN FROM CARTON)
DO
NOT
RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, Contact our
customer service department. We will
replace the part FREE of charge.
Tel # : [phone]
E-Mail: [email protected]
Fax #: [phone]
NOTE:
______ / ______ / ______
THIS INSTRUCTION BOOKLET
CONTAINS
IMPORTANT
SAFETY
READ AND KEEP FOR
DATE OF PURCHASE:
INFORMATION. PLEASE
DOREL ASIA
DA7752M
MODEL NO:
UPC CODE:

*
*
*
*
*
*
*
*
*
or pacifier cords.
If guardrails are used as the mattress containment means, guardrail(s) provided must be
used to avoid the formation of a gap between the mattress and the bed that could cause an
entrapment.
The TODDLER BED is not intended for children under 15 months of age or over 50 pounds
WARNING ENTRAPMENT/
STRANGULATION HAZARD:
Infants have died in toddler beds from entrapment and strangulation.
Failure to follow these warnings and assembly instructions could result in serious injury or
DO NOT suspend strings over a TODDLER BED for any reason.
Any mattress used must be at least 27-1/4 inches by 51-5/8 inches (69cm by 131cm) with a
minimum thickness of 4 inches (10cm) and not exceeding 6 inches (15cm).
death from entrapment or strangulation.
NEVER use bed with children under 15 months.
DO NOT place TODDLER BED near windows where cords from blinds or drapes may
strangle a child.
DO NOT place items with a string, cord, or ribbon around a child's neck, such as hood strings
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service
representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product
model number, color and a detailed description of the part.
(22.7kg).
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
Canada, H1G 3L1
E-MAIL: [email protected]om

* Ensure all parts and components are present before beginning assembly.
* Phillips head screwdriver is not included.
* Assembly will require 2 people.
* Estimated assembly time: 45 minutes.
* DO NOT use power tools.
*Caution: Adult assembly required.
* DO NOT lift bed from side rails when moving. Raise from headboard and footboard when
moving bed.
Dorel warrants its product to be free from defects in material and workmanship and agrees to
remedy any such defect. This warranty covers 1 year from the date of original purchase. This
warranty is valid only upon presentation of proof of purchase. This is solely limited to the repair
or replacement of defective furniture components and no assembly labor is included. This
warranty does not apply to any product which has been improperly assembled, subjected to
misuse or abuse or which has been altered or repaired in any way. This warranty gives you
specific legal rights and you may also have other rights which vary from State to State.
WARNING: Should this product
become damaged, and/or components
are broken or missing, DO NOT USE.
NOTES
CARE AND CLEANING
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used
occasionally to clean surface. Dry immediately. Do not use any abrasives that may damage
finish. Excessive exposure to sunlight and extreme changes in temperature and moisture can
damage wood furniture.
MAINTENANCE
Check bolts periodically and tighten if necessary.

1 2
3 4
5 6
7
BARREL NUT
10 PCS
ALLEN KEY
1 PC
∅
1/4" x 1-3/4"
∅
1/4" x 1/2" 4MM
STOPPER
6 PCS
∅
10mm x 40mm
∅
8mm x 30mm
WOOD DOWEL
8 PCS
WOOD DOWEL
20 PCS
TODDLER BED
DA7752/DA7752M
BOLT
2 PCS
BOLT
20 PCS
HARDWARE LIST
∅
1/4" x 2-3/4"

A B C
D E F
G H I
J K L
M
TODDLER BED
DA7752/DA7752M
PARTS LIST
HEADBOARD POST
2 PCS
TOP PANEL
1 PC
HEADBOARD SLAT
4 PCS
HEADBOARD SLAT
2 PCS
FOOTBOARD POST
2 PCS
NARROW SUPPORT SLAT
6 PCS
BOTTOM PANEL
1 PC
GUARDRAIL
2 PCS
CENTER SUPPORT SLAT
1 PC
WIDE SUPPORT SLAT
4 PCS
FOOTBOARD PANEL
1 PC
LEFT SIDE RAIL
1 PC
RIGHT SIDE RAIL
1 PC

TODDLER BED
DA7752/DA7752M
STEP 1
Insert wood dowel (5) into ends of top panel (B). Attach headboard posts (A) to the top
panel (B) using bolt (1) as shown. Use Allen Key (4) to tighten the bolt.
NOTE: Do not fully tighten the bolt. Leaving it loose will facilitate assembly in the following
steps.
A
1
5
5
5
15

TODDLER BED
DA7752/DA7752M
STEP 2
Insert headboard slats (C & D) into the holes of the top panel (B). Push the headboard slats
to secure them in place.
A
C

TODDLER BED
DA7752/DA7752M
STEP 3
Insert wood dowels (5) into ends of the bottom panel (D).
Insert stoppers (7) and headboard slats (C & D) into the holes of the bottom panel
(E) as shown below.
Secure the bottom panel (E) to the headboard post (A) using bolt (1) as shown. Use
Allen Key (4) to tighten the bolt.
NOTE: Do not fully tighten the bolts. Leaving the bolts loose will facilitate assembly
in the following steps.
15 7
7

TODDLER BED
DA7752/DA7752M
STEP 4
You have finished assembling the headboard.
Attach the other headboard post (A) to the top panel (B) and bottom panel (E) using
bolt (1) as shown. Use Allen Key (4) to tighten the bolts.
NOTE: Do not fully tighten bolts. This will facilitate assembly in the following steps.
1
A

TODDLER BED
DA7752/DA7752M
STEP 5
Insert wood dowels (5) to the footboard panel (G).
Attach the footboard panel (G) to the footboard posts (F) with bolts (1) and Allen key (4) as shown
below.
15
F
5
5
F

TODDLER BED
DA7752/DA7752M
STEP 6
Insert wood dowels (6) into both ends of narrow support slats (M) and wide support slats (L).
Insert barrel nut (3) into the hole center support slat (K). Ensure the barrel nut (3) is flush with
center support slat (K).
Attach the center support slat (K) to the right side rail (I) by inserting bolt (1) through the right side
rail (I) and into the barrel nut (3). Use Allen key (4) to tighten the bolt (1).
Insert the wide and narrow support slats (L & M) into the grooves of the right side rail (I). Ensure the
dowels in the slats go into the holes on the side rail.
NOTE: Barrel nut (3) can be rotated using a screwdriver (not included) to properly align with the bolt
coming through side rail (I).

TODDLER BED
DA7752/DA7752M
STEP 7
Insert barrel nut (3) into the other end of center support slat (K). Ensure the barrel nut (3) is flush
with center support slat (K).
Attach the left side rail (H) to slats (L, M & K). Secure center support slat (K) to left side rail (H) with
bolts (1) and Allen key (4).
NOTE: The barrel nut (3) can be rotated using a screwdriver (not included) to properly align with the
bolt coming through side rail (H).
Use Allen Key (4) to tighten the bolts (1) installed in Step 6 & 7.
13

TODDLER BED
DA7752/DA7752M
STEP 8
Insert barrel nuts (3) into both ends of the left and right side rail (H & I).
Attach the headboard and footboard to the left and right side rail (H & I) by inserting bolts (1)
through the headboard posts (A) and footboard posts (F).
Use Allen key (4) to tighten bolts.
NOTE: Do not fully tighten the bolts. This will facilitate assembly in the following steps.
13
A
I

STEP 9
TODDLER BED
DA7752/DA7752M
NOTE: Fully tighten all bolts installed in previous steps..
Attach guardrails (J) to headboard posts (A) with bolts (1).
Secure guardrails (J) to the left and right side rail (H & I) with bolts (2) as shown. Use Allen key
(4) to tighten bolts.
2
1

DO
NOT
RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, Contact our
customer service department. We will
replace the part FREE of charge.
Tel # : [phone]
E-Mail: [e-mail]
Fax #: [phone]
TODDLER BED
DA7752/DA7752M
That's it ! You've finished assembling your toddler bed.
CAUTION: This unit is intended for use only with the
products and/or maximum weights indicated. Use with other
products and/or products heavier than the maximum
weights indicated may result in instability or cause possible
injury.
!
NEVER use bed with
children under 15
months or weighing
more than 50 lbs (22.7kg)

MODEL #: DA7752/DA7752M
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity: (Please be sure to list model number or SKN number)
Customer Service Representative Mailing Address:
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1
Customer Service
Customer Service Phone Number 1-800-295-1980
Email: [e-mail]
Customer Service Fax Number 514-353-7819