Dorel Living DL1010BB-1 User manual

Model Number: UPC Code: Color:
DL1010BB-1 0-65857-17183-9 WHITE
DL1010BB-2 0-65857-17184-6 WHITE
Date of Purchase: _____ / _____ / _____ Lot Number:
(taken from carton)
TWIN BUNK BED
Congratulations on your latest furniture purchase! Dorel Living furniture has been developed with
quality, convenience and style in mind. We trust it will provide you with many years of exceptional
comfort and service.
Before beginning assembly, we encourage you to familiarize yourself with your new furniture piece by
taking a few minutes to go through this booklet. It contains important information on our warranty and
care tips to keep your furniture looking as good as new.
Customer satisfaction is important to us at Dorel Asia. Our agents are available Monday to Friday
8am to 5pm (EST) to answer any question you may have. For faster service, always have the model
number ready when calling our toll free number 1-800-295-1980 or emailing us at [email protected] .
For more great furniture ideas, check out our website at www.dorelliving.com
You can also keep up to date on all the latest trends by liking our Facebook page.
DO NOT RETURN PRODUCT TO THE STORE. If a part is missing or damaged, contact
our customer service department. We will replace the part FREE of charge.
NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.

*
*
*
*
*
*
MAXIMUM WEIGHT CAPACITY: 165 LBS (75KGS) PER LEVEL.
*
*
*
*
*
*
*
*
*
*
*
E-MAIL: [email protected]
WARNING
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service
representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product
model number, color and a detailed description of the part.
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
Canada, H1G 3L1
USE ONLY COIL SPRING MATTRESSES ON BOTH THE UPPER AND LOWER BUNKS.
FAILURE TO DO SO CAN RESULT IN INJURY.
USE ONLY MATTRESSES WHICH ARE 74"-75" LONG AND 37 1/2" - 38 1/2" WIDE ON
UPPER AND ON LOWER BUNKS. ENSURE THICKNESS OF MATTRESS DOES NOT
EXCEED 6". SURFACE OF MATTRESS MUST BE AT LEAST 5" (127MM) BELOW THE
UPPER EDGE OF GUARDRAILS.
STRANGULATION HAZARD - NEVER ATTACH OR HANG ITEMS TO ANY PART OF THE
BUNK BED THAT ARE NOT DESIGNED FOR USE WITH THE BED; FOR EXAMPLE, BUT
NOT LIMITED TO HOOKS, BELTS AND JUMP ROPES.
ALWAYS USE THE RECOMMENDED SIZE MATTRESS OR MATTRESS SUPPORT, OR
BOTH, TO HELP PREVENT THE LIKELIHOOD OF ENTRAPMENT OR FALLS.
FOLLOW THE INFORMATION ON THE WARNINGS APPEARING ON THE UPPER BUNK
END STRUCTURE AND ON THE CARTON. DO NOT REMOVE WARNING LABEL FROM
BED.
THE MATTRESS PLATFORM IS DESIGNED TO SUPPORT A MATTRESS WITHOUT THE
NEED FOR A POSTURE BOARD OR BOX SPRING.
DO NOT ALLOW CHILDREN UNDER 6 YEARS OF AGE TO USE THE UPPER BUNK.
ALWAYS USE GUARDRAILS ON BOTH LONG SIDES OF THE UPPER BUNK. IF THE BUNK
BED WILL BE PLACED NEXT TO THE WALL, THE GUARDRAIL THAT RUNS THE FULL
LENGTH OF THE BED SHOULD BE PLACED AGAINST THE WALL TO PREVENT
ENTRAPMENT BETWEEN THE BED AND WALL (APPLICABLE FOR BUNK BEDS WITH
FULL LENGTH GUARDRAILS ON ONE SIDE).
ALWAYS USE THE LADDER FOR ENTERING AND LEAVING THE UPPER BUNK.
KEEP THESE INSTRUCTIONS FOR FUTURE USE.
THE USE OF WATER OR SLEEP FLOTATION MATTRESSES IS PROHIBITED.
PROHIBIT MORE THAN ONE PERSON ON UPPER BUNK.
PERIODICALLY CHECK AND ENSURE THAT THE GUARDRAIL, LADDER AND OTHER
COMPONENTS ARE IN THEIR PROPER POSITION, FREE FROM DAMAGE, AND THAT ALL
CONNECTORS ARE TIGHT.
DO NOT ALLOW HORSEPLAY ON OR UNDER THE BED AND PROHIBIT JUMPING ON THE
BED.
DO NOT USE SUBSTITUTE PARTS. CONTACT CUSTOMER SERVICE FOR REPLACEMENT
PARTS.
USE OF A NIGHT LIGHT MAY PROVIDE ADDED SAFETY PRECAUTION FOR A CHILD
USING THE UPPER BUNK.

*
*
*
*
*
*
*
*
*
ESTIMATED ASSEMBLY TIME 60 MINUTES.
Check bolts/screws periodically and tighten them if necessary.
WARNING: Should this product become
damaged, and/or components are broken or
missing, DO NOT USE.
A RUBBER MALLET (NOT INCLUDED) IS RECOMMENDED TO FACILITATE ASSEMBLY.
BED IS DESIGNED FOR CHILDREN RANGING FROM 6 YEARS OF AGE TO YOUNG
TEENAGERS.
NOTES
LIMITED WARRANTY
CARE AND CLEANING
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used
occasionally to clean surface. Dry immediately. Do not use any abrasives that may damage
finish. Excessive exposure to sunlight and extreme changes in temperature and moisture can
damage wood furniture.
Dorel warrants its product to be free from defects in material and workmanship and agrees to
remedy any such defect. This warranty covers 1 year from the date of original purchase. This
warranty is valid only upon presentation of proof of purchase. This is solely limited to the repair
or replacement of defective furniture components and no assembly labor is included. This
warranty does not apply to any product which has been improperly assembled, subjected to
misuse or abuse or which has been altered or repaired in any way. This warranty gives you
specific legal rights and you may also have other rights which vary from State to State.
READ EACH STEP CAREFULLY BEFORE STARTING. IT IS VERY IMPORTANT THAT EACH
STEP OF INSTRUCTION IS PERFORMED IN THE CORRECT ORDER. IF THESE STEPS
ARE NOT FOLLOWED IN SEQUENCE, ASSEMBLY DIFFICULTIES WILL OCCUR AND CAN
RESULT IN INJURY.
MAKE SURE ALL PARTS ARE INCLUDED. WORK IN SPACIOUS AREA, PREFERABLY ON A
SMOOTH SOFT SURFACE.
ASSEMBLY WILL REQUIRE TWO PEOPLE.
PHILLIPS SCREWDRIVER (NOT INCLUDED) IS REQUIRED.
CAUTION: ADULT ASSEMBLY REQUIRED.
MOST BOARD PARTS ARE LABELED OR STAMPED ON THE RAW EDGE.
MAINTENANCE

1 2
3 4
5 6
7 8
910
ALLEN KEY
1 PC
CAP
4 PCS
∅4mm x 30mm
FLAT HEAD WOOD SCREW
6 PCS
BARREL NUT
16 PCS
∅11.8mm x 15mm
DL1010BB-1 / DL1010BB-2
TWIN BUNK BED
JOINT CONNECTOR (4mm HEX HEAD)
16 PCS
WOOD JOINT CONNECTOR (4mm HEX HEAD)
14 PCS
∅1/4" x 100mm
∅6.5mm x 48mm
HARDWARELIST
∅6.5mm x 100mm
∅4mm x 35mm
WOOD DOWEL
4 PCS
∅19mm x 95mm
WOOD JOINT CONNECTOR (4mm HEX HEAD)
22 PCS
WOOD DOWEL
30 PCS
∅10mm x 50mm
FLAT HEAD WOOD SCREW
24 PCS

A B C
D E F
TWIN BUNK BED
TOP POST
2 PCS
TOP POST
1 PC
TOP POST
1 PC
PARTS LIST
DL1010BB-1 / DL1010BB-2
BOTTOM POST
2 PCS
HEADBOARD
2 PCS
BOTTOM POST
2 PCS

G H I
J K L
M N O
P Q R
S
LONG GUARDRAIL
2 PCS
SHORT GUARDRAIL
2 PCS
LADDER STEP
4 PCS
GUARDRAIL LEG
2 PCS
LONG LADDER END
1 PC
SLAT
4 PCS
SLAT
12 PCS
SHORT LADDER END
1 PC
TWIN BUNK BED
PARTS LIST
FOOTBOARD
2 PCS
TOP SIDE RAIL (WITH 3 HOLES)
1 PC
BOTTOM SIDE RAIL (WITH 2 HOLES)
1 PC
DL1010BB-1 / DL1010BB-2
TOP SIDE RAIL (WITH 1
HOLE)
1 PC
BOTTOM SIDE RAIL (WITH NO
HOLES)
1 PC

TWIN BUNK BED
DL1010BB-1 / DL1010BB-2
Insert wood dowels (7) into both ends of headboard (F).
Attach top posts (A & B) to the headboard (F) with wood joint connector (3) using
Allen key (9).
STEP 1

STEP 2
TWIN BUNK BED
DL1010BB-1 / DL1010BB-2
Repeat the previous step to assemble the footboards (G) and other headboard (F).
Be sure to attach the bottom posts (D & E) to the footboard (G) and top posts (C & A)
to the headboard (F).
NOTE: Be sure to use headboard (F) with the label attached to it between top posts (A)
and (C). See illustration for label orientation.
Label

TWIN BUNK BED
DL1010BB-1 / DL1010BB-2
Attach footboards (G) to the bottom side rails (I and K) with joint connectors (1) and
barrel nuts (8) using Allen key (9).
Note: This is the lower bunk.
STEP 3
I
K
Holes
1
1
9
8
8
8
8
I
K
Holes
1
1
9
8
8
8
8
G
G

STEP 4
Insert barrel nuts (8) to the top side rails (H and J).
Insert wood dowels (7) into each end of the long guardrails (M).
Attach top side rails (H and J) to the top posts (A, B and C) as shown above with
joint connectors (1) and barrel nuts (8). Attach long guardrails (M) to the top posts
(A & B) with wood joint connectors (3) using Allen key (9).
Note: This is the upper bunk.
TWIN BUNK BED
DL1010BB-1 / DL1010BB-2
3
M
3
M
3
M