Dorel Signature DA6402BG-K User manual

Model No:
UPC CODE:
NOTE:
THIS INSTRUCTION BOOKLET
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND
KEEP FOR FUTURE REFERENCE.
Lot number:
(TAKEN FROM CARTON)
________________
DA6402BG-K (Beige)
UPHOLSTERED KING
HEADBOARD
Date of purchase:
_______ / _______ / _______
INSTRUCTION MANUAL
0-65857-16346-9
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer
service department. We will replace the part FREE
of
charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]

*
*
*
*
*
*
*
*
Ensure all parts and components are present before beginning assembly.
Assembly and handling will require two people.
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service
representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product model
number, color and a detailed description of the part.
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
Canada H1G 3L1
E-MAIL: [email protected]
NOTES
LIMITED WARRANTY
WARNING: Should this product become
damaged, and/or components are broken or
missing, DO NOT USE.
Dorel Asia warrants its product to be free from defects in material and workmanship and agrees to
remedy any such defect. This warranty covers 1 year from the date of original purchase. This
warranty is valid only upon presentation of proof of purchase. This is solely limited to the repair or
replacement of defective furniture components and no assembly labor is included. This warranty
does not apply to any product which has been improperly assembled, subjected to misuse or abuse
or which has been altered or repaired in any way. Any wearing, tearing or fading of the fabric is not
covered under the warranty. This warranty gives you specific legal rights and you may also have
other rights which vary from State to State.
Assemble on a soft, smooth surface to prevent damage to the product finish.
Read all instructions completely before assembly.
DO NOT use power tools.
CAUTION: Adult assembly required.
Estimated assembly time: 15 minutes.
The bed frame is not included and must be purchased separately.
CARE AND CLEANING
Dust regularly with a soft, dry cloth to prevent soil build up. Keep away from heat to avoid glazing,
melting or scorching. Use a professional cleaning service to clean the fabric.
MAINTENANCE
Check bolts/screws periodically and tighten them if necessary.

HARDWARE LIST
1 2 3
4 5 6
7 8 9
10 11
FLAT WASHER SPRING WASHERHEX SOCKET HEAD BOLT
UPHOLSTERED KING HEADBOARD
DA6402BG-K
Ø5/16" X 50mm Ø22 X 1.8mm Ø12.5 X 1.2mm
HEX SOCKET HEAD BOLT
16 PCS 12 PCS
Ø16 X 1.8mm Ø10.5 X 1.2mm
FLAT WASHER SPRING WASHER
2 PCS 2 PCS
Ø5/16" X 63mm Ø8mm Ø4mm
WRENCH
NUT ALLEN KEY
4 PCS 1 PC
1 PC
8 PCS
HEX SOCKET HEAD BOLT
2 PCS
Ø1/4" X 90mm
1 PC
Ø5mm
4 PCS
ALLEN KEY

PARTS LIST
A B
C D
HEADBOARD LEFT LEG
UPHOLSTERED KING HEADBOARD
DA6402BG-K
RIGHT LEG STRETCHER
1 PC 1 PC
1 PC 1 PC
NOTE: LEGS (B & C) AND STRETCHER (D) ARE PACKED
INSIDE THE HEADBOARD (A). PULL BACK THE FABRIC
LINING BEHIND THE HEADBOARD TO COLLECT ALL PARTS.

STEP 1:
Place all parts on a clean, smooth surface.
Attach the stretcher (D) to the left leg (B) and right leg (C) with flat washers (5),
spring washers (6) and hex socket head bolts (4). Use Allen Key (9) to tighten the bolts.
Note: Do not over tighten the bolts.
UPHOLSTERED KING HEADBOARD
DA6402BG-K
-3-

STEP 2:
Pull back the fabric lining on the back of the headboard (A).
Attach the assembled legs to the headboard (A) using flat washers (2), spring
washers (3) and hex socket head bolts (1). Use Allen Key (10) to tighten the bolts.
Place the fabric lining back into place.
UPHOLSTERED KING HEADBOARD
DA6402BG-K

wrench (11) to tighten the nuts (8).
NOTE: THE BED FRAME IS NOT INCLUDED AND MUST BE
PURCHASED SEPARATELY. THE FOLLOWING
ILLUSTRATIONS ARE FOR REFERENCE ONLY.
UPHOLSTERED KING HEADBOARD
DA6402BG-K
Attach the bed frame (purchased separately) to bed posts using bolts (7), spring washers (3),
flat washers (2) and nuts (8). Use Allen Key (10) to tighten bolts and use the open end
8
7

That's it! You've finished assembling your headboard.
UPHOLSTERED KING HEADBOARD
DA6402BG-K
CAUTION: This unit is intended for use only with the
products and/or maximum weights indicated. Use with other
products and/or products heavier than the maximum weights
indicated may result in instability or cause possible injury.
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [e-mail]
Fax #: [phone]
Dust regularly with a soft, dry
cloth to prevent soil build up.
Keep away from heat to avoid
glazing, melting or scorching.
Use a professional cleaning
service to clean the fabric.

MODEL #: DA6402BG-K
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Customer Service Phone Number 1-800-295-1980
Customer Service Fax Number 514-353-7819
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity (Please be sure to list model number or SKN number):
Customer Service
Customer Service Representative Mailing Address:
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1
Email: [e-mail]