Dorel DA7239 User manual

Model No:
DA7239
Lot number:
(TAKEN FROM CARTON)
_____________________________________
Date of purchase:
_______ / _______ / _______
THIS INSTRUCTION BOOKLET
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND
KEEP FOR FUTURE REFERENCE.
DOREL ASIA
5-PC Dining Set
UPC CODE:
0-65857-16970-6
NOTE:
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

*
*
*
*
*
*
*
Dust table regularly with a soft, dry cloth to prevent soil build up. A dampened cloth may be used
occasionally to clean the surface. Dry immediately and buff lightly, following the grain. Avoid using
harsh cleaners and abrasive products. Use coasters to prevent the formation of moisture rings and trivets to
protect from hot items. Cover extension leaves (if applicable) with a soft protective fabric before storing.
Do not slide objects across the surface - always lift them.
Fabric- Dust regularly with a soft, dry cloth to prevent soil build up. Keep away from heat to avoid
glazing, melting or scorching. Use a professional cleaning service to clean the fabric.
MAINTENANCE
LIMITED WARRANTY
Dorel Asia warrants its product to be free from defects in material and workmanship and agrees to remedy
any such defect. This warranty covers 1 year from the date of original purchase. This warranty is valid
only upon presentation of proof of purchase. This is solely limited to the repair or replacement of defective
furniture components and no assembly labor is included. This warranty does not apply to any product
which has been improperly assembled, subjected to misuse or abuse or which has been altered or repaired
in any way. Any wearing, tearing or fading of the fabric is not covered under the warranty. This warranty
gives you specific legal rights and you may also have other rights which vary from State to State.
WARNING: Should this product become damaged, and/or
components are broken or missing, DO NOT USE.
Check bolts/screws periodically and tighten them if necessary.
Phillips head screw driver is not included.
DO NOT use power tools.
CAUTION: Adult assembly required.
Assembly will require two people.
Estimated assembly time: 30 minutes.
CARE AND CLEANING
Montreal, Quebec
Canada H1G 3L1
E-MAIL: [email protected]
NOTES:
Ensure all parts and components are present before beginning assembly.
Assemble on a soft, smooth surface to prevent damage to product finish.
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product model number,
color and a detailed description of the part.
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100

4 PCS
16 PCS
16 PCS
16 PCS
BOLT
WOOD SCREW
1 PC
1 PC
9
10
ALLEN WRENCH
ALLEN KEY
7
8
BOLT
BOLT
36 PCS
44 PCS
5
6
Ø5/16" X 2-1/4"
Ø4 X 38MM
Ø5/16" X 19MM
5-PC Dining Set
DA7239
HARDWARE LIST
1
2
8 PCS
8 PCS
Ø5/16" X 23MM
Ø5/16" X 11MM
Ø5/16" X 1-1/2"
Ø5/16" X 3"
FLAT WASHER
SPRING WASHER
NUT
FLAT WASHER
3
4

4 PCS
8 PCS
4 PCS
4 PCS
E
F
SEAT CUSHION
CHAIR LEG
1 PC
4 PCS
C
D
BACK FRAME
SEAT FRAME
5-PC Dining Set
DA7239
PARTS LIST
A
B
TABLE TOP
TABLE LEG

STEP 1
5-PC Dining Set
DA7239
With the help of another person, place table top (A) upside down on a clean smooth surface.
Attach table legs (B) to table top (A) with nuts (1), spring washers (4) and flat washers (2).
Use Allen wrench (9) to tighten nuts (1).
Turn the table upright.
2419
B
B
B
B
A

STEP 2
5-PC Dining Set
DA7239
Attach seat frame (D) to back frame (C) with bolts (6), spring washers (4) and flat washers (3)
through the corners of seat frame (D).
Secure the center of seat frame (D) to back frame (C) with bolt (5), spring washer (4) and flat
washer (3).
Use Allen key (10) to install the bolts.
NOTE: Do not fully tighten the bolts. Leaving them loose will facilitate assembly in the following
steps.
5
6
C
D
34
6
10
34510

5-PC Dining Set
DA7239
STEP 3
Attach the legs (F) to seat frame (D) with bolts (7), spring washers (4) and flat washers (3).
Use Allen key (10) to tighten the bolts.
NOTE: Tighten all the bolts installed in previous steps.
7
F
F
C
D
3
4
7
10

STEP 4
5-PC Dining Set
DA7239
Attach seat cushion (E) with wood screws (8) as shown below. Use a Phillips head screw driver
(not included) to tighten all wood screws (8).
Turn the chair upright.
NOTE: Once all bolts have been installed, apply a downward force on the chair.
This will help all legs to sit flush on the floor.
Repeat steps 2 - 4 to assemble the remaining chairs.
8
8
C
E
D
F
F

That's it ! You've finished assembling your dining set.
5-PC Dining Set
CAUTION: This unit is intended for use only with the products
and/or maximum weights indicated. Use with other products and/or
products heavier than the maximum weights indicated may result in
instability or cause possible injury.
DA7239
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service department. We will
replace the part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]
Product
Maximum
Weight
100 lbs

MODEL #: DA7239
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity (Please be sure to list model number or SKN number):
Customer Service
Customer Service Phone Number 1-800-295-1980
Email: [email protected]
Customer Service Fax Number 514-353-7819
Customer Service Representative Mailing Address:
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1