Dorel DASE3605 User manual

2011-6-17
E-Mail: [email protected]

If you are missing parts or have any questions about this product, contact our customer service representative first!
You can also order parts by writing to the address listed below. Please include the product model number,
color and a detailed description of the part.
E-MAIL: [e-mail]
Montreal, Quebec
CUSTOMER SERVICE
12345 Albert-Hudon Boulevard, Suite 100
Customer Service Department No. 413
CALL 1-800-295-1980
WARNING
Canada H1G 3L1
DO NOT leave children unattended on or beside the chair .
DO NOT sit on the edge of the seat, armrests or on the backrest as this could make the chair tip over.
* Ensure that all parts and components are located before beginning assembly.
* Estimated assembly time: 20 minutes
* Assembly may require two people.
* Cushions must not be machine washed. Dry clean only.
* Do not use power tools.
* CAUTION: Adult assembly required.
* Phillips head screwdriver is not included.
* If any parts are damaged or missing, please contact Our Customer Service for replacement parts.
NOTES
DO NOT use your chair as a step stool.
* Assemble on soft surfaces to prevent damage to the product finish.
* Read all instructions completely before assembly.
WARNING
Dust regularly with a soft, dry cloth to prevent soil build up. Wipe away spills immediately with a damp
cloth and avoid using harsh cleaning products. Wipe away spills immediately to prevent staining. Use a
cloth dampened with water or a professional product to clean the fabric. Always test an inconspicuous
area first. Allow upholstery to dry and brush lightly. Keep away from heat to avoid glazing, melting or
scorching.
CARE AND CLEANING
Check bolts/screws periodically and tighten them if necessary.
MAINTENANCE
Dorel Asia warrants its product to be free from defects in material and workmanship and agrees to
remedy any such defect. This warranty covers 1 year from the date of original purchase. This warranty is
valid only upon presentation of proof of purchase. This is solely limited to the repair or replacement of
defective furniture components and no assembly labor is included. This warranty does not apply to any
product which has been improperly assembled, subjected to misuse or abuse or which has been altered
or repaired in any way. The warranty does not cover the wearing, tearing or fading of the fabric. This
warranty gives you specific legal rights and you may also have other rights which vary from State to State.
DOREL ASIA WARRANTY
E-Mail: [email protected]

STEP 1
NOTE : Leave bolts loose to allow easier assembly of arms in following steps.
Attach the back frame (B) to the base (A) with hex socket head bolts (2) and
spring washers (3). Use Allen Key (5) to tighten bolts.

STEP 2
1: Attach the right arm assembly (FR) to back frame (B) with hex socket head bolt (1), spring
washer (3) and barrel nut (4). Insert the barrel nut (4) into the hole underneath the armrest
as per detail A. Insert the hex socket head bolt (1) through the hole in the back frame (B) as
per detail A. Use Allen Key (5) to tighten bolts.
2: Attach the right arm assembly (FR) to the base (A) with hex socket head bolts (2) and spring
washers (3). Use Allen key (5) to tighten bolts.
3: Repeat steps 1 and 2 to assemble left arm assembly (FL).
NOTE : Do not fully tighten bolts until all bolts have been installed. Once all bolts have been
installed, fully tighten bolts installed in previous steps.

STEP 3
Attach the arm cushions (E) to the armrests by buttoning the buttons
along with the interior seat and on the sides.

STEP 4
Place the seat cushion (C) onto the base (A).

STEP 5
Attach the back cushion (D) to the back frame (B).

That's it ! You've finished assembling your glider rocker & ottoman.
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer
service department. We will replace the part FREE of
charge.
E-Mail: [email protected]

MODEL #: DASE3605
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity: (Please be sure to list model number or SKN number)
Customer Service
Customer Service Representative Mailing Address:
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1
Customer Service Phone Number 1-800-295-1980 Email: [email protected]
Customer Service Fax Number 514-353-7819