DOUGHXPRESS TXM-15CP Lil Chick User manual

70359 RV C_090517
Receiving & Installation....................................................................................2
Operation .........................................................................................................2
Warranty...........................................................................................................4
TXM-15CP
Manual Meat Press
OWNER’S MANUAL
CONTENTS
BEFORE warranty repair you MUST get Prior Authorization
For Customer Service, Call 1-800-835-0606 ext. 205
or Visit www.doughXpress.com
TXM-15CP
“Lil Chick”
®
doughXpress

2
THINNER
THICKER
PLEASE READ THIS MANUAL IN ITS ENTIRETY BEFORE OPERATING YOUR PIZZA PRESS. A
DIGITAL COPY OF THIS MANUAL IS AVAILABLE ON DOUGHXPRESS.COM/PRODUCT-MANUALS
UNPACKING
Remember to save all packing materials - including any crating, boxes,
liners and boards. You may need these for shipping your machine or should
a repair be necessary in the future.
INSPECTION
Inspect your machine for hidden shipping damage. Contact the delivery
company immediately, should you nd damage.
PLATEN SURFACE
Slight surface imperfections are a normal part of the aluminum casting
process for the platens on your press. These are not considered a defect
and do not affect the functionality of the machine in any way.
NOTE: Upon receiving your new equipment, some debris or residue may
be present on the aluminum platen(s). Clean the platens per the
instructions provided prior to rst use.
INSTALLATION
Remove from box (Keep box just in case you need to return). Team lift
machine is very heavy.
OPERATION
1. With the press in the open position, adjust the press
to the desired thickness by turning the thickness
control knob located on the top of the machine.
Thickness is reduced by turning knob clockwise
and increased by turning it counterclockwise as
indicated. Using the thickness control knob, turn right
for thicker or left for thinner until you have the thickness you desire.
CAUTION: DONOTOPERATETHISPRESSWITHANYOTHERPERSON(S)/
HAND(S)NEARYOUORTHEPRESS.SERIOUSINJURYCOULD
RESULT.
2. Pull down the handle all the way, applying pressure, until it stops. Raise
the handle all the way up.
3. Rotate the lower platen out and remove your attened product.
RECEIVING & INSTALLATION

3
OPERATION
WARNING: Before cleaning, performing maintenance or repairs make sure
the machine is turned off and the machine is unplugged.
***This appliance is not waterproof. Never spray or pour water or
any other cleaning solution onto this appliance.***
CLEANING PTFE COATED PLATENS
4. Open the press for easier access.
5. Clean the platen(s) with a mild soap and warm water applied with a
soft cloth or sponge. Do not use steel wool, scrub sponges, kitchen
or oven cleaners or any other kind of abrasive material. This will
damage the platen.
6. Wipe clean with a dry cloth.
CLEANING OUTSIDE SURFACES OF THE MACHINE
Use a mild soap and warm water applied with a soft cloth or sponge.
Do not use steel wool, scrub sponges, kitchen or oven cleaners or other
abrasives that will damage the surface.
LUBRICATION
Your press requires lubrication every 15,000 cycles or every 6 months.
Lubricate weekly in a heavy use production environment. Use NSF/NLG12
rated food grade grease (such as Bel-Ray No-Tox #2 or equivalent). A
general purpose food grade machine oil spray is also acceptable such as
CRC03055 lubricant (available from retailers such as Amazon). Lubricate
all moving or hinged points.

4
BEFORE warranty repair you MUST get
Prior Authorization: Call 1-800-835-0606
Warranty will be voided otherwise.
WARRANTY & SERVICE
DOUGHXPRESS will automatically register the equipment on the date it was shipped, please
keep a copy of their sales invoice showing the serial number and date it was sold/shipped to
you with this warranty. We will use the distributor’s invoice date as the beginning warranty date.
STAPLE A COPY OF YOUR PROOF OF PURCHASE TO THIS WARRANTY and keep in a safe place
to provide verication of your warranty should a problem occur.
Please ll in the following information and attach a copy of your receipt for your records.
Date Purchased: ____________________________From:__________________________________
Model #: _____________________________________ Serial #: _____________________________
This warranty applies to equipment manufactured by the HIX Corporation (DOUGHXPRESS),
Pittsburg, Kansas, U.S.A. DOUGHXPRESS warrants to the original purchaser, the full line of
DOUGHXPRESS products against defects in workmanship and material, except for wear and tear
for a period of one year parts and labor limited warranty on most items, there are selected items
which may carry a two year warranty (refer to owners manual.) All dough press carts, compres-
sors, and accessories are warranted for 90 days from the date of purchase.
Repairs include parts and labor only, excluding is the following:
1. Overtime Labor Rates
2. Expedited Freight for Parts
3. DoughXpress assumes no responsibility for down time or loss of product.
All defective parts must be returned to DOUGHXPRESS for credit. Repairs must be pre-autho-
rized by DOUGHXPRESS prior to work commencing.
4. Travel time is not covered by DOUGHXPRESS, unless pre-authorized by
DOUGHXPRESS.
In the event of a defect, DOUGHXPRESS, at its option, will repair, replace or substitute the
defective item at no cost during this period subject to the limitations of insurance and shipping
costs stated below.
This warranty does not cover normal wear and tear, damages due to accident, misuse/abuse,
alterations or damage due to neglect, or lack of proper lubrication or maintenance. DOUGHX-
PRESS shall not be responsible for repairs or alterations made by any person without the prior
written authorization by DOUGHXPRESS. This warranty is the sole and exclusive warranty of
DOUGHXPRESS and no person, agent, distributor, or dealer of DOUGHXPRESS is authorized to
change, amend or modify the terms set forth herein, in whole or in part.
In the case of a problem with the equipment identied herein, DOUGHXPRESS should be
contacted during regular business hours to discuss the problem and verify an existing war-
ranty. DOUGHXPRESS personnel will assist the customer to correct any problems which can be
corrected through operation or maintenance instructions, simple mechanical adjustments, or
replacement of parts. In the event the problem cannot be corrected by phone, and upon the issu-
ance of a return authorization by DOUGHXPRESS, the equipment shall be returned to DOUGH-
XPRESS or an authorized service representative. All insurance, packaging and shipment/freight
costs are solely the responsibility of the customer, and DOUGHXPRESS shall not be responsible
for improper handling or damage in transit. DOUGHXPRESS customer service personnel may be
contacted for complete return authorization and reconditioning information.
This expressed warranty is given in lieu of any and all other warranties, whether expressed or
implied, including but not limited to those of merchantability and tness for a particular purpose,
and constitutes the only warranty made by DOUGHXPRESS.
In no event shall DOUGHXPRESS’ liability for breach of warranty extend beyond the obligation
to repair or replace the nonconforming goods. DOUGHXPRESS shall not be liable for any other
damages, either incidental or consequential, or the action as brought in contract, negligence or
otherwise.
This warranty gives you specic legal rights and you may also have other rights which vary from
state to state.
1201 E. 27th Terrace • Pittsburg, KS 66762 • U.S.A.
(620) 231-8568 • Fax: (620) 231-1598
WARRANTY
Table of contents
Other DOUGHXPRESS Power Tools manuals

DOUGHXPRESS
DOUGHXPRESS DM-18 User manual

DOUGHXPRESS
DOUGHXPRESS TXM-15 User manual

DOUGHXPRESS
DOUGHXPRESS DMS-2-18 User manual

DOUGHXPRESS
DOUGHXPRESS TXM-20 User manual

DOUGHXPRESS
DOUGHXPRESS TXM-15CP User manual

DOUGHXPRESS
DOUGHXPRESS TXM-15CP User manual

DOUGHXPRESS
DOUGHXPRESS DXA User manual

DOUGHXPRESS
DOUGHXPRESS DMS-18D User manual