Dover OPW PETROVEND PV300E User manual

Petro Vend PV300E Quick Start
Part Number: M1024-QS
Revision: 1
PV300E

PV300E Quick Start
Component Connections
M1024-QS_r1 PV300E Quick Start | Dover Fueling Solutions 2

Door Assembly Connections to the 5-Port Router
Power and Petro-Net Connections
M1024-QS_r1 PV300E Quick Start | Dover Fueling Solutions 3

Receipt Printer Installation
WARNING: To prevent dangerous conditions, make sure all power to the
terminal is disconnected when you do the procedures that follow.
The instructions that follow show how to field-install a Citizen receipt printer.
The data and power cables are pre-connected to their sources under the cover to the right of the printer
bracket. The cover does not need to be removed.
Align the screws in the bottom of the printer unit with the holes of the factory installed bracket. Make sure that
no cables get caught under the unit. When the screws are in the bracket holes, push the unit to the left until it
clicks.
M1024-QS_r1 PV300E Quick Start | Dover Fueling Solutions 4

Find the Data Cable end with the mark, P50. Connect it to the snap-in connector on the right rear of the
printer as shown above.
Connect the printer's Power Cable to the power connector on the left rear of the printer.
There is a latch on the bottom of the bracket. Push this latch up to lock the printer in position.
M1024-QS_r1 PV300E Quick Start | Dover Fueling Solutions 5

Revisions M1024-QS
Revision # ECO Effective Software Version Key Changes
0 1847 1/22/2021 N/A Initial Release
1 2048 6/22/2022
Replace Zebra printer instructions
with Citizen printer. Reformat lay-
out.
M1024-QS_r1 PV300E Quick Start | Dover Fueling Solutions 6