Dr. pen M8 User manual

PLEASE READ THE MANUAL BEFORE USEUSER MANUALDr pen M8

Power InterfaceSpeed Display ScreenNeedle CartridgesScale Adjustment RingPower/Speed Button
Parts Name

ChargingStatus The power indicator turns green after charging completedThe power indicator stays red while chargingThe instrument used with both built-in battery or AC power1.Plug in DC adaptor to the jack2.Plug in DC adaptor to AC outlet3.To charge the battery:Plug the adapter into an outlet and connect it to the power interfaceWireless Model: Dr pen M8-WWired Model: Dr pen M8-CThe instrument used with with AC power only How to operate

1.Take out needle cartridge in the sterilized packaging3.Lock the needle cartridge by turning it to the clockwisecounterPreparation2.Fitting round slot 1 into 2 of machine, push needle cartridge horizontally up to the end.4.Turn the needle cartridge clockwise and then push out horizontally if you want to remove it.How to operate5.Start the Dr.pen M8Press the power button for 2-3 seconds to start or shut down the deviceAttentionIn order to protect the well,do not invert the instrument to prevent the liquid backflowinstrument

2.500.250.50.752.0
Speed DisplayHow to operate6 Speeds AdjustmentThe pen starts from low to high speed The speed changes once each time you press the buttonAdjust the depth of needle by turning the scale adjustment ringTurn it clockwise,needle depth will be shorterTurn it counterclockwise,needle depth will be longerAdjustment of needle lengthCounter ClockwiseClockwiseThe depth will be longerThe depth will be shorter

Needle cartridge introduction11 Needles16 Needles24 Needles42 Needles36 NeedlesRNANO NeedlesNeedles5DNANO NeedlesSNANO/3DNANO

Product name: Auto-stamp Motorized Meso Machine Model name: Dr pen M8Adapter: 5V-1000mAPackage Weight: 312gPackage Size: 169*123*56mmPacking ListItemQuantityNeedleCartridge ManualAdapterHand PiecePower Cable1 pc2 pcs1 pc1 pc1 pcSpecification

PrecautionAttention, consult accompanying documentsDate of manufactureClass I equipmentDirect currentAlternating currentSerial NoEU RepresentativeCE markManufacturerFloating applied part

WarrantyGeneral maintenanceKeep it with its power off.Wipe its surface out with a dry clothKeep it away from direct sunlight or high temperature and humidityDo not leave the measurement, repair or alter of the device to non-professional staffMake sure to inspect the device and adapter before useWhen you use the device which has not been used for a long time, make sure to check if it works properly with safetyThe warranty period of Dr pen M8 is 6 months. We offer repair to our products from the day they are purchased. If any of our products has damages or natural trouble. We offer repair or replacements

Dr pen M8USER MANUAL