Draper 503020 User manual

Gymnasium Equipment

2www.draperinc.com 765-987-7999
Table of Contents
EZ Fold Basketball Backstops ...............................2-9
EZ Fold Basketball Backboards and Goals ....... 10-11
Backboard Height Adjusters ....................................11
EZ Fold Backstop Accessories ................................ 12
Portable Basketball Systems/Height Adjusters ....... 13
Wall Pads/Wall Pad Cutout ....................................14
Graphic Wall Pads/Patriot Motorized flag .............15
Draper Gym Dividers ........................................ 16-20
Mat Lifters ............................................................. 21
Volleyball Systems/Accessories ..........................22-26
Physical Education Equipment .............................. 27
Outdoor Equipment ............................................... 28
Football Goals and Accessories .............................. 29
Soccer Goals and Accessories ................................. 30
Draper will be there from the
Planning Stage through Game
Time…
Draper is committed to being your expert consultant for all gymna-
sium equipment.
• Draper offers the most complete and highest quality line of gym-
nasium equipment available, including basketball backstops, divider
curtains, wall pads, volleyball systems, mat lifters and more. Draper
offers all your gymnasium equipment needs from a single source—no
need to deal with multiple manufacturers or suppliers.
• Draper’s industry-leading product quality starts with the skill and
commitment of our design and manufacturing staff and continues
all the way through the life of your facility. Draper’s quality is evi-
denced by the industry-leading advances that others have followed.
Draper is so confident in our product quality that we offer the best
warranties in the gymnasium equipment business.
• Draper and our network of dealers provide complete service from
project infancy through installation and beyond.
• Let Draper or your local Draper dealer assist you with equipment
selection, writing specifications and facility
layout utilizing our Draper EZ-SPEC. With EZ-SPEC, we can
instantly provide complete specifications, drawings, layout details,
weights and point loads in an easy to use electronic format you can
drop right into your project file. This powerful tool gives you infor-
mation and details you need in planning your project.
Draper EZ Fold®
Basketball Backstops
The First & Finest Basketball
Backstops...Since 1955
• first to design the single-stem, all-welded mainframe;
• first to use high-strength steel mechanical tubing instead of heavy pipe;
• The only one to offer a 25-year warranty. No other manufacturer
offers you this protection.
This tradition of innovation has continued for over 50 years, and today
EZ Fold is the highest quality backstop on the market.
For more information on EZ Fold, go to:
www.draperinc.com/go/WhyEZFold.htm.
Draper offers three directions to fold the backstop—forward, back or
to the side—giving you a ° choice of which way to take the backstop
up and out of play. Available space and design of the facility usually
dictates the choice between a front, rear, or side-braced backstop.
For ceiling heights of  or less, Draper EZ Fold Basketball
Backstops are made with an all-welded “T” Frame. “B” after a model
number denotes bolt-together T-Frame, which includes web braces for
exceptional strength.
• Rear-folding units will clear obstacles like ceiling-mounted score
boards and speakers.
• Forward-folding backstops install close to a fixed wall.
• Side-folding backstops fold to clear walls and other obstructions.
• Rear-braced units have more clear space above backboard.
• Front-braced units position a backboard closer to a wall.
• Bent stem backstops provide greater clearance above the backboard.
They also install with less space between the pivot point and the
jackknife, reducing the likelihood of interference with other ceiling
suspended equipment.
• Stationary backstops are also available.
Dimensions, drawings and specifications:
www.draperinc.com/go/BBallBackstops.htm.
Choosing Draper EZ Fold
Basketball Backstops
Dedman Student Recreation Center, Southern Methodist University, Dallas,
TX. Draper products include: TF-20 backstops, Fold-Up gym divider and
numerous wall pads. Architect: Renaissance Design Group, Des Moines, IA.
Photography: © Scott Williams Photography, Dallas, TX.

3
www.draperinc.com 765-987-7999
Draper is one of the few basketball backstop manufacturers that provide a powder coat finish as standard. Draper provides either black or white
finish at no extra charge. White backstops are much more attractive than black backstops when suspended from white or light colored roof support
structures.
Over 160 Colors Available
We Powder Coat—As Our Standard, No Extra Charge
�
�
Dimensions, drawings and specifications: www.draperinc.com/go/BBallBackstops.htm.
Yellow Orange Rust Royal Blue Navy Kelly Green
Red Fuchsia Purple Forest Green Grey Wine
Printed color may vary from actual finish. Color samples available upon request.
Durability—Powder coating provides one of the most durable and
long-lasting finishes available. Powder coated surfaces are more resistant
to chipping, scratching, fading and wearing than other finishes. The du-
rability of powder coat means backstops will arrive on-site with a much
better appearance and virtually eliminates the need for the installer to
touch-up or painting contractor to re-paint the backstops.
Aesthetic—Powder coat produces a better looking finish. With powder
coating, there are no runs, drips or sags. Powder coat’s thicker finish
also provides fewer appearance differences due to the base color of the
material being coated. It is also much easier to control slight shade
variations between manufacturing lots when compared to wet paint
systems.
Economic—Powder coating is a cost saving alternative to liquid paint.
Powder coated backstops completely remove the need to have finish
paint applied and the installation is normally shorter and less expensive
because the material is cleaner and the need for touch up is virtually
eliminated.
Environmental—Powder coating is environmentally responsible. Pow-
der coat does not contribute to air pollution or ozone depletion, because
it does not contain solvents with volatile organic compounds (VOCs).
Powder coat releases virtually no VOCs into the atmosphere. Most
powder coat overspray can be 100% recyclable or re-usable, eliminating
waste going to the landfill or being released into the environment.
Show Your Colors!
A wide variety of colors greatly enhances the aesthetics of gymnasium
equipment. Specify the school colors, pick a color to match the gym
décor or choose a white backstop so it virtually disappears when against
white bar joist. With nearly unlimited colors to choose from, Draper
can provide virtually any color scheme. Contact Draper for a full line of
over 160 available colors.
Advantages of Powder Coating
Royal blue powder coated TB-25 and TF-20 backstops at
Christian Academy of Indiana, New Albany, IN. Architect:
MECA Design Group, Greenwood, IN. Photography: Wayne
Williams, Indianapolis, IN.

4www.draperinc.com 765-987-7999
Draper EZ Fold® Basketball Backstops
Posilok Safety Belt—Draper’s
safety belts out perform the compe-
tition. They are self-checking,
automatically resetting and virtually
fail-safe. They feature stronger belts
and faster arrest times than safety
belts used by competitors.
UL Listed Winches—All
Draper winches are listed by Under-
writers Laboratories and feature a 1
HP motor, grooved drum, and cable
tensioning system. Draper winches
protected by a five year warranty to
ensure years of trouble free operation.
A
B
C
D
E
F
G
Precision Welding—All Draper
welders have been tested and certified
to meet the requirements of American
Welding Society (AWS) D1.1 Struc-
tural Welding Code ensuring quality
fabrication and structural integrity.
4www.draperinc.com 765-987-7999
For more information on EZ Fold, go to: www.draperinc.com/go/WhyEZFold.htm.
New Castle YMCA, New Castle, IN
Photography: Wayne Williams, Indianapolis, IN.
Stronger Overhead—Draper’s
strength starts from the top. We
supply all 4 O.D. 11 gauge overhead
superstructure with all spans greater
than 10 including bridge trussing.
Independent testing shows that a
10span of Draper’s 4overhead tube
deflects up to 33% less than 3 ½tube used by other manufacturers
and 76% less when our standard bridge trussing is added.
NEW! Strength in the Pivot—
Draper’s backstop frame pivots on a
1¼ diameter solid steel shaft welded
into the top of our T-Frame and
secured in our ½ thick steel adjust-
able hanger. Each adjustable hanger
allows for easy and precise leveling
of the backstop and attaches to the
superstructure with four ½, grade 5
bolts.
Draper T-Frame hangers have been
independently tested and found to
support in excess of 25,000 lbs.
Load Safety Factory 57 to 1.
Custom Built for Your
Gymnasium—Draper custom
designs each backstop so the lateral
sway braces intersect the main mast
at approximately 54 above the goal
(18 above the backboard) to ensure
maximum rigidity. Draper does not
use stock assemblies and simply make
them fit your gym.
Calculations indicate that Draper
T-Frames deflect 36% less than compet-
itors’ models with sway braces attached
72 above the goal.
NEW! Beam Clamp—
Draper’s beam clamp provides at
least 7 square inches of beam
flange contact area and are secured
with two all-thread bolts at each
attachment point.
Draper’s beam clamps have been tested
to hold in excess of 25,900 lbs. Load
Safety Factor 94 to 1.

5
www.draperinc.com 765-987-7999
Goal Brace—Draper’s goal brace
connects the goal directly to the T-Frame,
removing stress from the backboard and
transferring it to the support structure. Use
of a goal brace allows Draper to offer a
lifetime warranty on any backboard.
NEW! Upper Bank Hanger—
Draper’s upper bank hanger is designed to
keep the backboard plumb and level even
with the goal removed. Our bank hanger
extends the backboard to the same distance
as our height adjuster allowing for easy addi-
tion of this feature after the
initial installation.
H
I
5
G
C
A
D
E
F
B
I
H

6www.draperinc.com 765-987-7999
Ceiling-Suspended, Forward-Folding Backstops
TF-20S
• Front-braced, folds forward.
• Fully-welded construction to heights up to .
• Bolt-together construction above .
• Bent stem, reduces space between pivot point and
jackknife.
• Electric winch required for installations over .
Dimensions, drawings and specifications available:
www.draperinc.com/go/CeilingSusFwdFold.htm.
TF-20J in play position, Knightstown (IN) High
School. Architect: R.W. Clinton & Associates, Inc.,
Richmond, IN. Photography: Wayne Williams,
Indianapolis, IN.
TF-20S Forward-Folding Backstops at Oswego
(IL) East High School. Architect: Kluber, Skahan
& Associates, Batavia, IL. Photography: Wayne
Williams, Indianapolis, IN.
TF-20J
• Rear-braced, folds forward
• Fully-welded construction to heights up to .
• Bolt-together construction above .
• Electric winch required for installations over .
• Features Draper’s exclusive “hammer lock”.
The hammer lock is a stem-weight actuated
positive latch. Securely locks your backstop into
playing position. Stem weight eliminates need
for supplemental cable retractors or stretch cords.
Dimensions, drawings and specifications available:
www.draperinc.com/go/CeilingSusFwdFold.htm.
�
�
TF-20
• Front-braced, folds forward.
• Fully welded construction to
heights up to .
• Electric winch required for
installations over .
Dimensions, drawings and specifications:
www.draperinc.com/go/CeilingSusFwdFold.htm.
TF-20 Forward-Folding Backstops at
Brandywine Church, Greenfield, IN.
Architect: CSO Schenkel Schultz, Indianapolis, IN.
Photography: Wayne Williams, Indianapolis, IN.

7
www.draperinc.com 765-987-7999
Ceiling-Suspended, Rear-Folding Backstops
TB-25
• Rear-braced, folds to back.
• Fully-welded construction to heights up to .
• Bolt-together construction above .
• Electric winch required for installations over .
Dimensions, drawings and specifications available:
www.draperinc.com/go/CeilingSusRearFold.htm.
Three TB-25 Rear-Folding Backstops above a
Draper Rolleramic projection screen.
West Ottawa High School, Holland, MI.
Architect: Design+, Grand Rapids, MI.
Photography: Wayne Williams, Indianapolis, IN.
TB-25S
• Rear-braced, folds to back.
• Fully-welded construction to heights up to .
• Bolt-together construction above .
• Bent stem reduces space between pivot point,
jackknife.
• Electric winch required for installations over .
Dimensions, drawings and specifications available at:
www.draperinc.com/go/CeilingSusRearFold.htm.
TB-25S-B at Christian Academy of
Indiana, New Albany, IN. Architect:
MECA Design Group, Greenwood,
IN. Photography: Wayne Williams,
Indianapolis, IN.
TB-25R
• Rear-braced, folds to back.
• Fully-welded construction to heights up to .
• Bolt-together construction above .
• Top of T-Frame mounted to heavy-duty trolley assemblies
that roll on I-Beam tracks.
• Top of T-Frame rolls forward as backstop folds back.
• Electric winch required.
Dimensions, drawings and specifications available at:
www.draperinc.com/go/CeilingSusRearFold.htm.
�
�
TB-25R at Woodhaven (MI) High School. Architect: The Design Forum, Inc., Grand
Rapids, MI. Photography: Wayne Williams, Indianapolis, IN.

8www.draperinc.com 765-987-7999
Ceiling-Suspended, Side-Folding Backstops
Ceiling-Suspended, Stationary Backstops
TBS-26-B
• Bolt-together mainframe with single brace
located back or front as required.
• Side-braced, specify left or right side, folds
toward side brace.
Dimensions, drawings and specifications:
www.draperinc.com/go/CeilingSusSideFold.htm.
TS-22
• Horizontal back-braced to wall.
• Fully-welded construction to heights up to .
• Bolt-together construction above .
Dimensions, drawings and specifications available at:
www.draperinc.com/go/CeilingSusStationary.htm.
TS-21
• Rear- or front-braced, stationary.
• Fully-welded construction to heights up to .
• Bolt-together construction above .
Dimensions, drawings and specifications available:
www.draperinc.com/go/CeilingSusStationary.htm.
Ceiling-Suspended, Double-Drop Frame
6 models to meet any specification. Same quality
construction and features as our T-Series in traditional
H-Frame designs.
• DDTF–20: front-braced, folds forward.
• DDTF-20J: rear-braced, folds forward.
• DDTB-25: rear-braced, folds to back.
• DDTB-25C: compact, rear-braced, folds to back.
• DDTS-21: ceiling-braced, stationary.
• DDTS-22: wall-braced, stationary.
Dimensions, drawings and specifications:
www.draperinc.com/go/CeilingSusDoubleDrop.htm.
DDTS-21 ceiling-braced, stationary backstop at Owen County Family
YMCA, Spencer, IN. Architect: MSKTD & Associates, Inc., Indianapolis,
IN. Photography: Wayne Williams, Indiana-polis, IN.
�
�
EZ Fold TBS-26-B folds to the side and out of the way of other sports
activities. West Ottawa High School, Holland, MI. Architect:
Design+, Grand Rapids, MI. Photography: Wayne Williams,
Indianapolis, IN.
EZ Fold TS-21-B with front brace
(above) and rear brace (left).
Sulphur (LA) High School, 9th
grade campus. Randall D. Brous-
sard, Architect LLC. Photography:
© Barry Champagne,
Houston, TX.

9
www.draperinc.com 765-987-7999
Wall-Mounted Backstops
SW Stationary Backstop at Centennial Middle School, South
Lyon, MI. Architect: Integrated Design Solutions, LLC,
Troy, MI. Photography: Wayne Williams, Indianapolis, IN.
DUW Up-Folding
• Folds upward to nearly flat against wall.
• Steel tubing framing system.
• Two ¼ welded-link chains support unit
in playing position.
• Manual or electric winch operated.
Dimensions, drawings and specifications:
www.draperinc.com/go/WallMounted.htm.
DGW Side-Folding
• Folds to either side against wall.
• Steel tubing framing system.
• Telescopic diagonal brace provides locking
device in play or stored positions.
• Threaded pin releases diagonal locking brace.
• Available with electric actuator to fold back-
stop. (Add “-E” to part number).
Dimensions, drawings and specifications:
www.draperinc.com/go/WallMounted.htm.
SWD Stationary
• Stationary wall mount .
• Direct-mount goal brace.
Dimensions, drawings and specifications:
www.draperinc.com/go/WallMounted.htm.
SW Stationary
• Steel tubing framing system.
• For units over  from the wall or with a height
adjuster, a pair of ¼ chain supports are added
(shown at right).
Dimensions, drawings and specifications:
www.draperinc.com/go/WallMounted.htm.
DUW Up-Folding Backstop in folded position at Christian Acad-
emy of Indiana, New Albany, IN. Architect: MECA Design Group,
Greenwood, IN. Photography: Wayne Williams, Indianapolis, IN.
�
�
SWD Stationary Backstop at Sulphur (LA) High School,
9th grade campus. Randall D. Broussard, Architect LLC.
Photography: © Barry Champagne, Houston, TX.
DGW Side-Folding Backstop at Centennial Middle School,
South Lyon, MI. Architect: Integrated Design Solutions, LLC,
Troy, MI. Photography: Wayne Williams, Indianapolis, IN.

10 www.draperinc.com 765-987-7999
Basketball Backboards
Limited Lifetime
Warranty on
all backboards
incorporating
EZ Fold
Goal Brace.
A0136 Rectangular Glass   
A0137 Downsize Rectangular Glass   
• Fully tempered ½ glass with official
white target and border permanently
fired into glass.
• Frame constructed of extruded brushed
aluminum.
• Only for backstop structures with
Goal Brace direct goal attachments.
A0127 EZ Strut Bank™   
• Same features as A0136 with additional ver-
tical strut to relieve stress on glass for slam
dunks.
• Goal is bolted to a plate welded to bottom of strut for maxi-
mum strength.
• Only for backstop structures with four-corner backboard
mounting.
A0132 Rectangular Glass Conversion
  
• Replaces fan shaped backboards.
• Same features as A0136 with all required conversion frame-
work attached to backboard.
• Incorporates a horizontal member which bolts to goal for maxi-
mum strength.
A0134 Rectangular Fiberglass   
• White backboard fabricated with double
³⁄₁₆ shell over resin-treated honeycomb
core.
• Orange border and target applied with a
high gloss gel coat.
• Steel attachment T-nuts and goal attach-
ment holes are through solid plastic blocks
encased between the shells.
• Both backboards designed for indoor or
outdoor use.
503140 Rectangular Wood   
• Finest wood backboard available.
• 55 pcf density solid laminated wood core
with eggshell white polyurethane face to resist abrasion.
• Border, target markings part of laminate to prevent wear.
A0133 Fan Aluminum
• White finish with orange
border and target.
• Lifetime Warranty.
A0018 Fan Fiberglass
  
• Constructed of high qual-
ity resins and fiberglass for
years of maintenance-free
service.
• Target and borders are
applied with a high-gloss
gel coat.
Optional Edge Padding
Draper recommends all rectangular back-
boards be fitted with edge padding to meet
rule requirements.
Three styles to choose from:
503264 ½ Wide Safe-edge Padding
503253  Wide Safe-edge Padding
• Grey, open cell foam material applied
easily with high strength adhesive.
5032(XX)* Bolt-on Padding
• Available in  colors.
• Bolts onto lower edges of backboard. It
has a molded-in steel track and a five-
year warranty on indoor installations.
*(XX - indicates color)
A0133
AO136
Dimensions, drawings and specifications: www.draperinc.com/go/BBallBackboard.htm.
AO134
NOTE:  x  backboards are available
for renovations and replacements.

11
www.draperinc.com 765-987-7999
A0576 Breakaway Goal
• Official breakaway goal withstands
shock loads due to a player slam
dunking.
• Rim deflects down when a load of 230
lbs. is applied and returns to the play-
ing position once the load is removed.
• Shock absorbing, release/return mechanism fully con-
cealed in protective cover.
A0570 Stationary Goal
• Official competition goal fits most back-
boards.
• Rim is supported by ⁷⁄₁₆ diameter steel
rod welded to the rim and mounting
plate.
A0572 Heavy-Duty Stationary Goal
• Same features as A0570 but with ⅝ dia. support brace to
withstand up to  lbs.
Basketball Goals
503040 180° Breakaway Goal
• Consistent breakaway pressure during
aggressive slam dunks.
• Ring assembly floats on chromium
ball bearings for smooth any-di-
rection flexibility.
• Tube-tie net attachment system
allows easy net installation.
• Pressure release mechanism is
field adjustable.
A0581 Tube Tie Breakaway
• Adjustable tension breakaway goal
with tube-tie net attachment system—virtually fail safe.
• Rim deflects down when a load of 230 lbs. is applied, and re-
turns to the playing position once the load is removed.
• Adjustable shock absorbing, release/return mechanism is con-
cealed within a fully protective cover.
Dimensions, drawings and specifications: www.draperinc.com/go/BasketballGoal.htm.
All goals above meet NCAA and NFHS specifications.
Includes hardware and net to fit  and  bank.
Direct Mount – Height
Adjusters For Backboards
• For rectangular or fan-shaped backboards
and goals.
• Features a direct goal attachment.
• All Draper backboards have a limited
lifetime warranty when used with our
height adjuster.
• Includes a self-adhesive height scale that
is graduated in  increments and labeled
at  intervals.
Dimensions, drawings and specifications available at:
www.draperinc.com/go/EZFoldAccessories.htm.
Motorized Height Adjuster
• Electric linear actuator provides smooth reversible motion.
• Linear actuator includes cam style limit switches that allow  of travel.
• Linear actuator assembly is bolted in place and easily removed for conversion
to manual operation.
503093 Motorized, for rectangular bank. Operated with Key Switch or
Smart Gym Touch Pad.
503097 Motorized, for fan bank. Operated with Key Switch or
Smart Gym Touch Pad.
503095 Motorized, for rectangular bank with wireless remote control.
503098 Motorized, for fan bank with wireless remote control.
503096 Motorized, for rectangular bank with EZ Stick Power Wand.
503099 Motorized, for fan bank with EZ Stick Power Wand.
Height Adjusters
503003 Portable Height
Adjuster Operator
A compact, cordless, reversible
electric operator for use with the
Manual Height Adjuster. Makes
operation safe and easy.
Manual Height Adjuster
Operated with a removable awning-
style crank handle and actuated via a
¾– Acme threaded rod. Its actua-
tor rod assembly bolts in place and
can be removed for conversion to
electric operation.
503092 Manual, for rectangular
backboards.
503094 Manual, for fan backboards.
Direct goal attachment is designed
to mount to virtually any style of
backstop. Electric height adjuster
can be raised and low-
ered to allow  of
travel.

12 www.draperinc.com 765-987-7999
Accessories and Controls
Smart Gym Control System
503020 Wireless
Remote Control
9-Station Transmitter
An alternative to a key switch, our electronic touch pad enables control of all Draper electrically operated gym equip-
ment, in excess of  devices. Provide power to or operates lighting, scoreboards and bleachers and virtually any other
electrical device.
• Safety first—Only the keeper of the programmable four-digit security code can access the system.
• Save Money—By decreasing number of lengthy wire and conduit runs. Smart Gym touch panel and relay panels oper-
ate on  volt current. System program allows for shared circuits.
• Save Time—Run multiple devices simultaneously reducing set up time for gym classes or games.
• Simplicity at its Best—Changing touch screen, user-friendly.
503023 EZ Power—Optional Wireless Remote Control
Eliminate wall boxes and individual key switches. EZ Power Wireless Remote Control capable of
operating up to 27 individual one horsepower electric motor winches.
• Operating range is at least , and features one-button programming.
• Requires item 503020, a 9-station transmitter, or 503021, a 27-station transmitter.
503085 Motorized Winch
• Operated by a one-horsepower direct drive, motorized winch.
• Delivers 1000 lbs. of vertical lifting and 1500 lbs. of horizontal line pull.
• Holds backstop at any position when raising or lowering the backstop.
• Cable drum provides proper spooling and ensures excellent repeatability of stop positions.
• Drum is equipped with a pressure roller with torsion spring tensioning. Ensures cable tracks in the
grooves even under slack cable conditions.
• No oil lubrication is required.
• Automatic limit switches control the distance of travel in either direction.
• Entire winch assembly is UL listed. •Five-year warranty.
• A 3-position momentary key switch and cover plate is supplied with each motorized winch.
503029 Posilok™ Safety Belt
Safety belts are recommended on all folding backstops, especially those suspended over bleachers or playing areas.
• The Posilok Safety Belt is self-checking, automatically resets and is virtually fail-safe.
• Checks the speed of the rotating reel six times per revolution and will instantly lock if the speed exceeds the trip point
of 1½ per second.
• Maximum extension indicator and breakaway loop indicates if the Posilok Safety Belt has
been tripped.
• Cycle tested to 30 years of typical gymnasium usage with no significant wear or deterioration of the unit.
503086 Manual Winch
• For ceiling heights under 28.
• The unit is virtually maintenance free.
• The cable drum is helical grooved for ¼, 7 x 19 aircraft cable to provide proper spooling.
• Drum is equipped with a pressure roller with torsion spring tensioning to ensure cable
tracks in grooves even under slack conditions.
• Gears and cable drum are enclosed by integral cover.
• Operated with standard removable handle or A0490 Portable
Operator.
A0490 Portable Operator
• A compact, heavy-duty, reversible electric operator for use with manual winch 503086.
Smart Gym touch pad
503085 Electric Winch
and Key Switch
A0490 electric operator for Manual Winch and optional  power cord
Removable hand crank
for manual winch 503086
Manual
Winch.
503029 Posilok
Safety Belt
Dimensions, drawings and specifications available at:
www.draperinc.com/go/EZFoldAccessories.htm.

13
www.draperinc.com 765-987-7999
Competition Portable System
Feature competition styling, an official-sized glass backboard and breakaway goal. Low-maintenance ex-
tension spring technology design makes one-person setup and height adjustment easy and fast.
Model 503018 (at right) has  of safe play area, and model 503019 has . Each has a full size   ,
½ tempered glass backboard and breakaway goal. Model 503019 features a rear anchor kit and added
structural members, ballast and horizontal beam padding to allow high school or college competition play.
Pads available in a wide variety of colors.
• Backboard has a lifetime limited warranty.
• Goal height is adjustable from  to  in
 increments.
• Base and front are fully padded on all sides with
 thick padding.
• Rolls easily on  diameter,  wide running gear.
• Front stabilizers lock in place for maximum
play stability.
• Molded bolt-on edge padding color matches base.
• Front floor positioning pins included.
Dimensions, drawings and specifications available at: www.draperinc.com/go/PortableBBall.htm.
503018
Recreational Portable System
The same quality features and attention to details found in Draper’s larger portables goes into this small-
er spring-assisted portable designed to fit even the smallest facilities. Built for aggressive play at recreation
centers, practice courts, multipurpose sports centers, churches or anywhere a durable, easy to setup
basketball court is required. Model 503016 is easily maneuverable on its floor friendly 8 diameter, 2 wide
urethane casters and adjustable padded front leveling feet.
NEW
• Easy one person set up and height adjustment
from 8 to 10.
• Model 503016 has a 54 extension at the 10 goal
height and features a 42 x 54 glass backboard
and built in ballast to prevent tipping.
• Optional floor anchor kit available.
• Base front and side padded with 2 thick vinyl
wrapped polyurethane foam available in 12 colors.
503016
Model 503016 has  extension at
the 10’ goal height.
Model 503018 has  of safe
play area.

14 www.draperinc.com 765-987-7999
Wall Pad Cut-Out Trim Kit
Wall Pads
Draper manufactures high quality gym wall padding to pro-
vide heavy-duty protection for indoor impact areas. Draper’s
Wall Pads are ideal for basketball courts, gymnastics areas,
wrestling rooms, rehabilitation centers—any surface area
where padding is needed.
Standard pad construction:
• A  thick, 3.5 lb. density, polyurethane foam pad bonded
to a ⁷⁄₁₆ thick waferboard, which is fully wrapped in a
vinyl-coated polyester covering, enhanced by a
leather-like emboss pattern.
• Variety of colors.
Optional constructions:
• A  thick pad with a 6 lb. density;
• A ½ thick polyurethane pad with a 3.5 lb. or 6 lb. density;
• A ½ thick polyethylene foam pad;
• A ½ fire-rated plywood backer;
• Vonar® interlining, a flame retardant material.
Vonar® is a registered trademark of DuPont.
Draper will custom make pads any shape or size, including those
for columns, beams, doors and stage fronts. All pads are manufac-
tured in one-piece construction. Laced, round post pads without a
waferboard backing available.
All standard Wall Pads include a  lip on the top and bottom for
easy installation over finished or unfinished walls. Or specify one of
the following:
Mounting options available—
• “Z”–Clips at the top and bottom for wall
mounting pads. Edges of pad are flush
with the wood backer. Eliminates  lip.
• “Z”–Clip at top and  nailing strip at the
bottom.
• Channel System: channel attaches to wall clips; trims out top
and bottom lip; remove single pads as needed for repair.
Wall Padding Vinyl Selections
General: Solid vinyl-coated polyester fabric with embossed pattern.
Weight: Average 14 oz. per square yard.
Strength: 350 lbs. per sq. inch break strength and 65 lbs. tear resistance.
Resistance to Rot and Mildew: Excellent.
Ultraviolet Resistance: Excellent.
flammability: Rated as self extinguishing in accordance with California
State fire Code (f–230) and Class A rated in accordance with require-
ments of NFPA-101.
Class A Flame Retardant Wall Pads
Draper’s flame retardant wall pads have been independently tested
as a singular unit and have been found to meet requirements of 
IBC Section .., when tested in accordance with NFPA , and
given a “Class A” rating in accordance with ASTM-E and NFPA
 test procedures. Test Results: flame Spread Index = ; Smoke
Developed Index = . Draper uses state of the art flame resistant
polychloroprene latex, open cell foam cushioning material, rigid OSB
backing and vinyl-coated polyester covering enhanced by a leather-
like emboss pattern. Coverings come in a full range of colors.
Dimensions, drawings, specifications and color selections available:
www.draperinc.com/go/WallPad.htm.
Woodhaven (MI)
High School.
Architect: The
Design Forum,
Inc., Grand Rapids,
MI. Photography:
Wayne Williams,
Indianapolis, IN.
Draper Wall Pad Cut-Out Trim Kit provides a neat and clean
answer to accessing receptacles and switches. Simply make the neces-
sary field cut-out then insert and staple the molded rubber trim kit.
Manufactured from fire-resistant molded rubber and sized to accom-
modate any wall pad with the standard ⁷⁄₁₆ thickness. Wall Pad
Cut-Out Trim Kit is available in gray or black and can be used with
single or double gang electrical boxes as well as standard sized fire
alarms.
NEW
(Above) Oswego (IL) East
High School. Architect:
Kluber, Skahan + Associates
Inc., Batavia, IL.
504700 - Gray
504701 - Black

15
www.draperinc.com 765-987-7999
Graphics Wall Pads
Print your mascot, full-color photo, sponsor’s ad-
vertising, or any art you choose on your wall of
pads. Any size is possible.
• Large format digital image reproduction.
• Printed in 3-color process.
• Images are not silk-screened or made with vinyl
tape.
• Art is sharp and clear from any distance.
Images are printed on 18 oz. coated vinyl and lami-
nated with  mil clear coat for durability. Over
1000 images to choose from or submit your own
ideas. All designs are sent to the client for final ap-
proval prior to printing.
Contact Draper for details or go to:
www.draperinc.com/go/GraphicWallPad.htm.
Patriot Motorized Flag
This unique gym equipment product makes a dramatic presentation of the United
States flag in any gymnasium. “Old Glory” appears at the touch of a switch or wire-
less transmitter. Standard product includes a sewn, nylon flag. Options include
state flags or school banners, provided by customer.
The Patriot can display a flag either vertically or horizontally. flag measures  x
 with both mountings. The vertical or banner flag is housed in a  case, and the
horizontal flag is housed in a  case.
Patriot Motorized flag at Knightstown (IN) High School.
Architect: R.W. Clinton & Associates, Inc., Richmond, IN.
Photography: Wayne Williams, Indianapolis, IN.
Sulphur (LA) High School, 9th grade campus. Randall D.
Broussard, Architect LLC. Photography © Barry Champagne,
Houston, TX.
Harris Elementary School, Greenfield, IN. Photography: Wayne
Williams, Indianapolis, IN.
(Above) Close-up of flag mounting
and case (right).
Christian Academy of Indiana, New Albany, IN. Architect: MECA Design Group, Green-
wood, IN. Photography: Wayne Williams, Indianapolis, IN.

16 www.draperinc.com 765-987-7999
Gym Divider Vinyl and
Mesh Selections
• General: Solid fabric is a durable vinyl-coated poly-
ester. Mesh fabrics are vinyl-coated polyester mesh
woven from .025 yarn in a one-over-one weave pat-
tern. The yarn is composed of 80% pigmented vinyl
and 20%, 840 denier polyester.
• Weight: Solid fabrics average  oz. (optionally avail-
able: avg. 22 oz. per sq. yard). Mesh averages 9.0 oz.
per sq. yard.
• Resistance to Rot & Mildew: Excellent.
• Ultraviolet Resistance: Excellent.
• Flammability: Rated as self extinguishing by the California State fire
Code (solid: f–31.5 and f–140; mesh: f–230) and Class A Rated in ac-
cordance with requirements of NFPA-101.
• All seams are electronically welded with a  full contact weld.
• Available in a wide variety of vinyl and mesh colors.
Dimensions, drawings, specifications and color selections:
www.draperinc.com/go/GymDivider.htm.
Gym Dividers
Curtain Lok™ Divider Curtain Safety Device
Draper’s innovative independent safety device locks drive shaft
operated curtains. Based on the same technology as our Posilok
Safety Strap (see page ), the Curtain Lok
is directly speed sensitive and instantly locks
the curtain drive shaft whenever the speed
exceeds ½ per second.
Draper gym dividers are constructed of the highest
quality reinforced vinyl. Select a vinyl-coated polyester
mesh to facilitate air flow, a tough solid vinyl to provide
a visual barrier between play areas or a combination of
mesh on top and solid on the bottom. (See physical de-
scriptions below.)
• Instant reversing motor—when the key is turned the
opposite way the curtain is traveling, the motor shuts
off momentarily and then reverses direction.
• All hardware is heavy-gauge stampings or of
welded construction.
• The mechanism is not direction sensitive.
• The Curtain Lok is compatible with Drap-
er Fold-Up, Roll-Up, Radius-Fold and
Top-Roll Divider Curtains, as well as
similar style curtains from other manufacturers.
10"
Beam clamp
Eye bolt
Track & hanger
assembly
Chain and "S" hook
Curtain
6"
Structure
Walk–Draw Gym Divider
A Walk–Draw gym divider is the most cost-effective way to divide
floor space in a recreational facility. The idea is simple: suspend the
vinyl curtain from an overhead track. While walking, pull the curtain
into place, or pull it back into its compact storage area. Curtain always
moves at operator’s pace because ball bearing wheels ensure a smooth
gliding action. Draper designs tracks to accommodate the shape and
size of sports areas: box in a court with four curtains or radius the track
to encircle the area.
Select a solid vinyl, a vinyl-coated mesh or a combination of both.
Several solid vinyl colors are readily available.
• In the stacked position, the Walk–Draw requires only a  clearance
on either side of the track’s center line.
• Total hanging weight is, on
average ½ lb. per sq. ft.
• Stacking space is ⅛ per
foot of divider.
• Track supports do not
exceed  on center.
Dimensions, drawings and
specifications available at:
www.draperinc.com/go/
WalkDrawDivider.htm.
Sutcliffe Hall Gymnasium, Centre College, Danville, KY. Project included in Athletic Business’
June 2006 issue, 19th Annual Architectural Showcase. Architect: Hastings & Chivetta
Architects Inc., St. Louis, MO. Photography © Sam Fentress, St. Louis, MO. Products include:
(2) TF-20 and (6) TF-20B Backstops and (2) Ridge-Fold Dividers.
Hellstern Middle School, Springdale,
AR. Architect: Wittenberg, Delony &
Davidson Architects, Little Rock, AR.
Photography © Curtis Photographics,
Memphis, TN.

17
www.draperinc.com 765-987-7999
Structure
D-2 lug
Pulley angle
Pulleys
2/0 chain
15/8" dia. steel pipe
Curtain
Grommets @ 18" O.C.
1/8" dia. steel aircraft cable
(2100 lbs. break strength)
15/8" dia. steel pipe
1'3"
Eye bolt
Struc. supp. by G.C.
D-2 lug
Pulley angle
Pulleys
2/0 chain
15/8" dia. steel pipe
Curtain
Grommets @ 18" O.C.
1/8" dia. steel aircraft cable
15/8" dia. steel pipe
Finished floor
Advise
1'-3"
Curtain height varies from 21'-0" to 35'-1"
Eye bolt
1/8" dia. steel aircraft cable
Ridge–Fold Gym Divider Each hoist cable terminates
at an individual drum that is
part of the C–Facemotor and
winch system. The individual
drums are sized in variable
ratios, allowing the divider to
contour to the roof structure.
Draper designs the size and
look of your divider curtain
to match your facility.
A solid vinyl bottom portion of the divider will create a visual barrier
when privacy is a concern. Mesh on top will complete the balance of
the divider, giving you the division of space and at the same time,
facilitate air flow.
Ridge-Fold Gym
Dividers at Warwick
Academy, Warwick,
Bermuda. Architect:
MBP Limited,
Hamilton, Bermuda.
Photography © Art
Simons, Photographic
Associates, Pembroke,
Bermuda.
A Draper Ridge–Fold gym divider installs and folds up compactly along
the slope of the roof. The accordion fold-up action is achieved by lift cables
passing through grommets as the bottom tube is raised. If the roof of your
building peaks in the center or to one side, then a Ridge–Fold is the gym
divider for you. Tell us the height of the peak and eaves and desired curtain
width.
• Only Draper uses hinged pipe in the top and bottom pockets, allowing
curtain to follow contour of building.
• Simple to install. Hoist cables are pre-attached to the drums at the motor
end: guide them to the appropriate pulley, lace down through the grom-
mets and attach to concealed weights in the bottom pocket.
• Engineered for reliability. Outer edge hems are triple turned with
double welds.
Dimensions, drawings and specifications available at:
www.draperinc.com/go/RidgeDivider.htm.

18 www.draperinc.com 765-987-7999
Radius–Fold Gym Divider









































Draper’s Radius–Fold gym divider solves the problem of separating a perim-
eter running track from the playing courts inside a field house or multi-purpose
facility. Draper achieves a curve with a single piece of curtain by segmenting the
drive pipe with double universal joints, while others use single universal joints.
The accordion fold–up action is accomplished by lift cables passing through
grommets as the bottom tube is raised.
For maximum safety, specify Draper’s Curtain Lok
on Fold-Up or Radius-Fold gym divider. See page 16 for details.
• Folds/unfolds without horizontal cables, ropes or pulleys.
• Curtain seams are vertical.
• Outer edge hems are triple turned with double welds.
• Total hanging weight is, on average, ½ pound per sq. ft.
• Minimum of  of clearance is required between vertical edges of adjoining
curtains and fixed objects.
• The stacking dimension is approximately .
Choose Draper’s Fold–Up gym divider for a reliable way to divide one area
into two. Accordion fold–up action is accomplished by lift cables passing through
grommets as the bottom tube is raised. It folds and unfolds without any hori-
zontal cables, ropes or pulleys. It’s engineered with heavy-gauge stampings or
all-welded hardware.
Choose a Fold–Up gym divider made in either all solid vinyl, vinyl-coated poly-
ester mesh or a combination of mesh on top and solid on bottom.
• Vertical seams.
• Outer edge hems are triple turned with double welds.
• Total hanging weight is, on average, ½ lb. per sq. ft.
• Stacking dimension is approximately ½.
• A Fold–Up divider can be made in virtually any size, but cannot be cutout for
bleachers and doors.
• A minimum of  of clearance is required between vertical edges and fixed ob-
jects, but we suggest you allow more space for walking around ends of divider.
Dimensions, drawings and specifications:
www.draperinc.com/go/FoldUpDivider.htm.
Fold–Up Gym Divider
Z-Bracket Assembly
with Flange Clamps
Structure
Curtain
1/2"-13 Threaded Rod
with 4 Nuts & Lock Washers
Drive Pipe Centerline
15/8" O Steel Pipe
Bottom Batten
Finished Floor
61/2"
81/2"
Curtain Height
Finished Floor to Bottom of Support
Bottom Cradle Assembly
Chain x 24"
15/8" O Steel Pipe
Top Batten
1/8" O Steel
Aircraft Cable
Grommets @
18" O.C.
Z-Bracket Assembly
with Flange Clamps
Structure
Curtain
1/2"-13 Threaded Rod
with 4 Nuts & Lock Washers
61/2"
81/2"
Bottom Cradle Assembly
Chain x 24"
15/8" O Steel Pipe
1/8" O Steel
Aircraft Cable
15/8" O Steel Pipe
Bottom Batten
2'6"+
-
±2"
Dimensions, drawings and specifications available at:
www.draperinc.com/go/RadiusDivider.htm.
Double universal joint insures smooth
operation and allows for bends as
great as °.
Seeger Memorial High School, West Lebanon, IN. Installation
includes (10) Fold-Up Dividers and (4) Radius-Fold Dividers
(below). Architect: PYRAMID Architecture/Engineering & Con-
struction Administration, Inc., Indianapolis, IN. Photography:
Wayne Williams, Indianapolis, IN.

19
www.draperinc.com 765-987-7999




















For maximum safety, specify Draper’s Curtain Lok
on Top-Roll gym divider. See page 16 for details.
A Top-Roll gym divider is the ideal way to divide space in facilities with
low ceiling heights. The curtain rolls neatly on the drive pipe so the stack-
ing dimension is only .
Draper’s clean design does not require belts, cables or complicated tor-
sion arms to make our curtain operate. For curtains up to  wide, our
Top-Roll uses a single 1 hp motor located on one end of curtain, which
simplifies the wiring diagram and saves money on the electrical wiring.
• Compare: Competitors use tubular motors at each end of the divider
requiring electronic synchronizers and electrical service at each end!
All electrical connections are made at and stay at ceiling level.
• Compare: A competitor’s center roll divider has motors in the middle of the
curtain, requiring the electrical connections to travel as far down as half the
height, an undesirable situation if the gym has a balcony or bleachers perpen-
dicular to the ends of the curtain.
The motor is mounted externally allowing it to cool properly.
• Compare: Tubular motors, used by others, only allow one or two consecu-
tive cycles before thermal overloads trip, meaning the user has to wait several
minutes before running curtain again.
Solid vinyl available in 18 oz. or 22 oz. weights, with all horizontal welds.
Any combination of mesh and vinyl height available. Total hanging weight
is, on average, ¾ lb. per sq. ft.
Outer edge hems are double turned and double welded to prevent fraying.
• Compare: Other top-rolling and center-rolling dividers on the market have a raw cut edge
that frays over time.
Dimensions, drawings and specifications available at:
www.draperinc.com/go/TopRollDivider.htm.
Top–Roll Gym Divider
Draper’s Top-Roll gym divider has a 5-year warranty.
Harris Elementary, Greenfield, IN. Photography: Wayne Williams, Indianapolis, IN.
At left: electric winch provided
with Fold-Up,Roll-Up, and
Top-Roll gym dividers.

20 www.draperinc.com 765-987-7999
A Roll–Up gym divider is a convenient and simple way to di-
vide an area. The curtain hangs from overhead supporting steel
structures. Easy to operate: just turn a key, and the curtain un-
rolls as needed or rolls up for storage.
The white polyester webbing belts that guide the roll up
action are flexible and cut straight and true to insure proper wrap-
ping of the belt onto the drive pipe. These thin, yet very strong
belts take up less space as they wind onto the drive pipe, putting
less strain on the motor.
Roll–Up Gym Divider
• A ll hardware is heavy-gauge stamping or welded construction
• Vinyl-coated polyester material is available in 18 oz. and 22 oz.
• Total hanging weight is, on average, ½ lb. per sq. ft.
• Seams run horizontally the full width of the curtain.
• The stacking dimension is approximately .
• Needs minimum of  of clearance between vertical edges
and fixed objects.
Dimensions, drawings and specifications available at:
www.draperinc.com/go/Roll-Up Divider.htm.
Draper’s Roll-Up
gym divider has a
5-year warranty.
Top Cradle Assembly
Z-Bracket Assembly
with Flange Clamps
Structure
Curtain
1/2" Threaded Rod
with 4 Nuts &
Lock Washers
Drive Pipe Centerline
31/2" O Steel Pipe
Bottom Batten
Finished Floor
61/2"
81/2"
Curtain Height
Finished Floor to Bottom of Support
Bottom Cradle Assembly
Chain x 24"
15/8" O Steel Pipe
Top Batten
5" Wide Web Belt
Top Cradle Assembly
Z-Bracket Assembly
with Flange Clamps
Structure
Curtain
1/2"-12 Threaded Rod
Bottom Cradle Assembly
Chain x 24"
15/8" O Steel Pipe
Top Batten
5" Wide Web Belt
61/2"
81/2"
2' +
-
31/2" O Steel Pipe
±2"
Top Cradle Assembly
Z-Bracket Assembly
with Flange Clamps
Structure
Curtain
1/2" Threaded Rod
with 4 Nuts &
Lock Washers
Drive Pipe Centerline
31/2" O Steel Pipe
Bottom Batten
Finished Floor
61/2"
81/2"
Curtain Height
Finished Floor to Bottom of Support
Bottom Cradle Assembly
Chain x 24"
15/8" O Steel Pipe
Top Batten
5" Wide Web Belt
Top Cradle Assembly
Z-Bracket Assembly
with Flange Clamps
Structure
Curtain
1/2"-12 Threaded Rod
Bottom Cradle Assembly
Chain x 24"
15/8" O Steel Pipe
Top Batten
5" Wide Web Belt
61/2"
81/2"
Approximately 2'+
-
31/2" O Steel Pipe
For maximum safety, specify Draper’s Curtain Lok
on Roll-Up gym divider. See page 16 for details.
University of Alabama, Student Recreation Center, Tuscaloosa, AL. Collegiate Citation
Winner of Physical-Education Facilities/Recreation Centers, Education Interiors Show-
case, American School & University magazine, August 2006. Architect: TMP Associates,
Inc., Bloomfield Hills, MI. Photography © Curtis Photographics, Memphis, TN.