Draytek Vigor2865 Series User manual

Vigor2865 Series
VDSL 35b Security Firewall
Quick Start Guide
Version: V1.5
Routers-
Wired
Models
Web registration is preferred. You can register your Vigor router via https://myvigor.draytek.com.
Due to the continuous evolution of DrayTek technology, all routers will be regularly upgraded. Please
consult the DrayTek web site for more information on newest firmware, tools and documents.
https://www.draytek.co.uk
Safety and Warranty for Wireless Models of Vigor Routers
Safety
Instructions
 Read the installation guide thoroughly before you set up the router.
 The router is a complicated electronic unit that may be repaired only be authorized and qualified personnel. Do not try to
open or repair the router yourself.
 Do not place the router in a damp or humid place, e.g. a bathroom.
 Do not stack the routers.
 The router should be used in a sheltered area, within a temperature range of 5 to +40 Celsius.
 Do not expose the router to direct sunlight or other heat sources. The housing and electronic components may be
damaged by direct sunlight or heat sources.
 Do not deploy the cable for LAN connection outdoor to prevent electronic shock hazards.
 Do not power off the router when saving configurations or firmware upgrades. It may damage the data in a flash. Please
disconnect the Internet connection on the router before powering it off when a TR-069/ ACS server manages the router.
 Keep the package out of reach of children.
 When you want to dispose of the router, please follow local regulations on conservation of the environment.
Warranty
We warrant to the original end user (purchaser) that the router will be free from any defects in workmanship or materials for a
period of two (2) years from the date of purchase from a DrayTek authorized dealer in the UK/Ireland. Please keep your purchase
receipt in a safe place as it serves as proof of date of purchase. During the warranty period, and upon proof of purchase, should
the product have indications of failure due to faulty workmanship and/or materials, we will, at our discretion, repair or replace
the defective products or components, without charge for either parts or labour, to whatever extent we deem necessary
tore-store the product to proper operating condition. Any replacement will consist of a new or re-manufactured functionally
equivalent product of equal value, and will be offered solely at our discretion. This warranty will not apply if the product is
modified, misused, tampered with, damaged by external factors, used with unapproved accessories or subjected to abnormal
working conditions. Warranty applies to hardware only, not software or firmware. Defects which do not significantly affect the
usability of the product will not be covered by the warranty. We reserve the right to revise the manual and online documentation
and to make changes from time to time in the contents hereof without obligation to notify any person of such revision or
changes.
Importer UK - CMS Distribution Limited, 15 Worship Street, London, EC2A 2DT
Ireland - CMS Distribution Limited, Bohola Road, Kiltimagh, Co Mayo, Ireland
External Power Supply (Power Adapter) Information
1 2 3 4 5 6 7 8 9
A Manufacturer CWT CWT CWT CWT CWT APD APD APD APD
B Address No. 222, Sec. 2,
Nankan Rd.,
Lujhu Township,
Taoyuan County
338, Taiwan
No. 222, Sec. 2,
Nankan Rd.,
Lujhu Township,
Taoyuan County
338, Taiwan
No. 222, Sec. 2,
Nankan Rd.,
Lujhu Township,
Taoyuan County
338, Taiwan
No. 222, Sec. 2,
Nankan Rd.,
Lujhu Township,
Taoyuan County
338, Taiwan
No. 222, Sec. 2,
Nankan Rd.,
Lujhu Township,
Taoyuan County
338, Taiwan
No.5, Lane 83,
Lung-Sou St.,
Taoyuan City 330,
Taiwan
No.5, Lane 83,
Lung-Sou St.,
Taoyuan City 330,
Taiwan
No.5, Lane 83,
Lung-Sou St.,
Taoyuan City 330,
Taiwan
No.5, Lane 83,
Lung-Sou St.,
Taoyuan City 330,
Taiwan
2ABB012F UK 2ABB018F UK 2ABL024F UK 2ABL030F UK 2ABN036F UK WA-12M12FG WB-18D12FG WA-24Q12FG WA-36A12FGC Model identifier 2ABB012F EU 2ABB018F EU 2ABL024F EU 2ABL030F EU 2ABN036F EU WA-12M12FK WB-18D12FK WA-24Q12FK WA-36A12FK
D Input voltage 100~240V 100~240V 100~240V 100~240V 100~240V 100~240V 100~240V 100~240V 100~240V
Input AC frequency 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60HzE Output voltage DC 12.0V 12.0V 12.0V 12.0V 12.0V 12.0V 12.0V 12.0V 12.0V
F Output current 1.0A 1.5A 2.0A 2.5A 3.0A 1.0A 1.5A 2.0A 3.0A
G Output power 12.0W 18.0W 24.0W 30.0W 36.0W 12.0W 18.0W 24.0W 36.0W
H Average active
efficiency 84.9% 86.2% 87.6% 87.8% 89.8% 83.7% 85.4% 88.6% 88.2%
I Efficiency at low load
10% 73.6% 78.0% 81.3% 83.3% 83.7% 74.5% 80.5% 86.4% 85.4%
J No-load power
consumption 0.07W 0.07W 0.07W 0.07W 0.07W 0.07W 0.10W 0.07W 0.10W
Note: Product specification is subject to continuous evolution which may not always be reflected in current documentation. For the formal
specification and details of the supported features of your product, please refer only to the web site at www.draytek.co.uk.

Declaration of Conformity
Hereby, DrayTek Corporation declares that the equipment type Vigor2865 is in compliance with The Electromagnetic
Compatibility Regulations 2016 (SI 2016 No.1091), The Electrical Equipment (Safety) Regulations 2016 (SI 2016 No.1101),
and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
(SI 2012 No. 3032).
The full text of the UKCA Declaration of Conformity is available at the following internet address:
https://fw.draytek.com.tw/Vigor2865/Document/CE/
 Product name: VDSL Security Firewall
 Model number: Vigor2865
 Manufacturer: DrayTek Corp.
 Address: No.26, Fushing Rd., Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan
EU Declaration of Conformity
Hereby, DrayTek Corporation declares that the equipment type Vigor2865 is in compliance with EU EMC Directive
2014/30/EU, Low Voltage Directive 2014/35/EU and RoHS 2011/65/EU.
The full text of the EU Declaration of Conformity is available at the following internet address:
https://fw.draytek.com.tw/Vigor2865/Document/CE/
 Product name: VDSL Security Firewall
 Model number: Vigor2865
 Manufacturer: DrayTek Corp.
 Address: No.26, Fushing Rd., Hukou, Hsinchu IndustrialPark,Hsinchu303,Taiwan
H
Ha ar rd dw wa ar re e I In ns st ta al ll la at ti io on n
1. Connect the DSL interface to the land line jack with a DSL line cable, or
Connect the cable Modem/DSL Modem/Media Converter to the WAN port of router with
Ethernet cable (RJ-45).
2. Connect one end of an Ethernet cable (RJ-45) to one of the LAN ports of the router and the
other end of the cable (RJ-45) into the Ethernet port on your computer.
3. Connect one end of the power
adapter to the router’s power
port on the rear panel, and the
other side into a wall outlet.
4. Power on the device by pressing
down the power switch on the
rear panel.
5. The system starts to initiate.
After completing the system
test, the ACT LED will light up
and start blinking.

W
Wa al ll l- -M Mo ou un nt te ed d I In ns st ta al ll la at ti io on n
Vigor router has keyhole type mounting slots
on the underside.
1. Drill two holes on the wall. The
distance between the holes shall be
168mm.
2. Fit screws into the wall using the
appropriate type of wall plug.
Note The recommended drill
diameter shall be 6.5mm
(1/4”).
3. When you finished about procedure,
the router has been mounted on the
wall firmly.
S
So of ft tw wa ar re e C Co on nf fi ig gu ur ra at ti io on n
Make sure your PC connects to the router correctly.
Open a web browser on your PC and type http://192.168.1.1. Apop-up window will open to ask for
username and password. Please enter “admin/admin” as the Username/Password and click Login.
Then, the Main Screen will pop up.